Parts Manual for
RZT TWIN STICK HYDRO DRIVE 250 Z
38" & 42"
SERIES 0 & 1
MODEL
RZT185380BVE (7800009)
RZT185381BVE (7800151)
RZT20420BVE2 (7800010)
RZT20421BVE2 (7800152)
McDonough, GA, 30253 U.S.A.
Briggs & Startton Yard Power Products Group
Manual No.
7006460
Copyright © 2007
Briggs & Startton Corporation
Milwaukee, WI USA. All Rights Reserved
Revision C, 10/30/2007
TP 400-5164-C-HZ-N
Table Of Contents
PAGE
4
GROUP
WHEEL GROUP
FRONT AXLE GROUP
FRAME GROUP
6
8
TRANSAXLE GROUP
10
12
16
20
22
24
26
30
34
36
38
40
42
44
46
48
50
52
54
CONTROL GROUP, LH
CONTROL GROUP, RH
PARK BRAKE GROUP
SNAPPER FENDER GROUP
SEAT GROUP
ENGINE GROUP (18.5 HP Briggs)
ENGINE GROUP (20 HP Briggs)
DECAL GROUP
DECK LIFT GROUP (38/42)
38" DECK GROUP (Sub-Assembly)
38" DECK GROUP (Final Assembly)
38" DECK SPINDLE
42" DECK GROUP (Sub-Assembly)
42" DECK GROUP (Final Assembly)
42" DECK SPINDLE
ELECTRICAL GROUP
WIRING HARNESS
WIRING SCHEMATIC (Briggs Engine)
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
3
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
4
WHEEL GROUP
Item Part No
Qty Description
Note
1
2
7059090
7039477
7035618
7035358
7029275
7012234
7091772
7035359
7090839
7050539
7078114
7078119
7050538
7078113
7078109
7027192
2
1
1
2
1
1
2
2
2
2
1
1
2
1
1
8
ASSEMBLY, Front Wheel & Tire
RIM, Caster Wheel
3
TIRE, 11 x 4.00-5, Smooth Tread
BALL BEARING, .625 x 1.38
4
5
GREASE FITTING, 1/4-28 thread forming
VALVE STEM, Snap In
Alemite #3038-B
6
7
SCREW, 7/16-14 x 6”, Hex Head Cap, GR 5
TUBE, 5/8 O.D. x 14 Ga. Wall x 4.510” long
NUT, 7/16-14 Hex Center Lock, GR 5 or B
ASS'Y, 18 x 6.50-8 Tire/Wheel, Turf-Master
RIM, 18 x 6.50, 4 Bolt
8
caster wheel spacer
9
10
11
12
13
14
15
16
used on RZT185380BVE
TIRE, 18 x 6.50-8, Turf Master
ASS'Y, 18 x 8.50-8 Tire/Wheel, Turf-Master
RIM, 18 x 8.50, 4 Bolt
used on RZT20420BVE2
TIRE, 18 x 8.50-8, Turf Master
LUG NUT 1/2-20 Tapered Seat YZ
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
5
FRONT AXLE GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
6
FRONT AXLE GROUP
Item Part No
Qty Description
Note
1
7100321
7013864
7400075
7013855
7012709
7091558
7090250
7011309
7012706
7091894
7091703
7091595
7090377
7300080
7200028
7032030
7091299
7300187
7091905
7091601
7091508
7091706
7100417
7077683
7300004
7090188
7091318
1
3
2
4
2
1
2
2
2
1
2
4
2
1
2
2
2
1
6
6
8
20
2
8
2
8
4
FRONT AXLE, Cast (Cardinal Red)
LUBE FITTING, 3/16” Press-In
WELDMENT, Caster (Cardinal Red)
THRUST WASHER, 1” I.D.
2
3
4
5
RETAINING RING, 1” External
SCREW, 1/2-13 x 3-1/2” Hex Head Cap, YZ
WASHER, 1/2” SAE Flat
6
7
8
SPACER, Axle Pivot
9
BEARING SLEEVE
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
NUT, 1/2-13 Hex Center Lock, GR 5, YZ
SCREW, 7/16-20 x 2-1/2” Hex Head Cap, GR 5 (Special Head)
WASHER, .47 x .92 x .065 Flat
NUT, 7/16-20 Hex Center Lock Jam, GR 5 or B
BRACKET, Quick Hitch
SWIVEL, 3/8-16 Inline
WASHER, 13/32 x 1-1/4” Flat
NUT, 3/8-16 Hex Nyloc
BRACKET, Axle (Cardinal Red)
BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
NUT, 5/16-18 Hex Flange Lock, GR 5
BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
NUT, 5/16-18 Hex Top Lock, GR B
PLATE, Friction
SCREW, 5/16-18 x 1” Flat Head Countersunk
BRACKET, Axle Support
WASHER, .34 x .69 x .08 Flat
SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
7
FRAME GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
8
FRAME GROUP
Item Part No
Qty Description
SUB-ASSEMBLY, Frame, (Red Paint)
Note
7500012
1
1
12
1
4
1
6
1
8
1
2
2
2
2
1
1
1
1
1
1
1
1
1
1
1
includes 22 Items shown below
1
2
7300181
7091601
7300006
7091811
7300184
7091508
7300226
7091905
7043307
7043309
7091742
7300342
7091070
7091894
7044760
7400021
7200034
7091587
7091218
7100103
7090122
7091585
7100266
7100287
FRAME, RZT (Cardinal Red)
NUT, 5/16-18 Hex Flange Lock, GR 5
TANK BRACKET
3
4
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
FOOTREST, Snapper (Cardinal Red)
BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
PLATE, Rear Seat Guard
5
6
7
8
BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
HEAT SHIELD
9
finish: black powder coat
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
BRACKET, Body Support
SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR 5
BRACE, Hood/Fender
NUT, 5/16-18 Hex Flange Lock, GR 5
NUT, 1/2-13 Hex Center Lock, GR 5, YZ
SPRING, Torsion, RH Wind
WELDMENT, Hydro Idler
SPACER, Hydro Idler
WASHER, .531 x 1.062 x .121 Flat, YZ
SCREW 1/2-13 x 2-1/2” Hex Head Cap, GR 5 (Black Phosphate)
IDLER, 3.25” OD x .391 ID x 1.63 Backside
WASHER, 3/8” Flat SAE
NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
MAT, Foot Rest RZT
MAT, Floor Pan
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
9
TRANSAXLE GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
10
TRANSAXLE GROUP
Item Part No
Qty Description
Note
1
2
7400020
7100229
7091294
7012431
7091867
7014664
7091298
7078112
7078111
7300082
7200046
7091601
7091908
7091830
7015686
7091944
7300000
7100102
7090188
7091703
7090377
2159106
1735484
1
2
2
2
8
2
12
1
1
1
1
1
2
4
8
4
2
1
8
2
2
1
2
WELDMENT, Transaxle Support
ROD, Roll Release
3
WASHER, .28 x .63 x .06 Flat, GR 5
HAIR PIN, 1-1/8”
4
5
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR 2
SHOULDER BOLT, 5/16-18
6
.530 long shoulder
7
NUT, 5/16-18 Hex Nyloc
8
TRANSAXLE, LH RZT
ZA-AHBB-2D5A-2DCX
ZA-DHBB-2D5A-2DCX
9
TRANSAXLE, RH RZT
10
11
12
13
14
15
16
17
18
19
20
21
22
23
BRACKET, Anti-Rotation
PIN, Anti-Rotation, RZT Clutch
NUT, 5/16-18 Hex Flange Lock, GR 5
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
SCREW, 5/16-18 x 3” Hex Head Cap, GR 5, YZ
SHIM WASHER, 5/16” I.D.
SCREW 5/16-18 x 2-3/4” Hex Head Cap, GR 5, YZ
BRACKET, Transaxle Support
V-BELT, HA Sect. (wrapped) 58.00 effective length
WASHER, .34 x .69 x .08 Flat
hydro drive
SCREW, 7/16-20 x 2-1/2” Hex Head Cap, GR 5 (Special Head)
NUT, 7/16-20 Hex Center Lock Jam, GR 5 or B
SPRING, Extention, .562 OD x 4.250 long x .049 Wire B
ARM, Control Kit
(Used for both R.H. & L.H.
Transaxle)
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
11
CONTROL GROUP, LH
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
12
CONTROL GROUP, LH
Item Part No
Qty Description
Note
1
2
7043338
7043336
7100051
7013874
7043301
7900016
7027344
7011121
7090658
7200012
1670971
7014409
7091299
1
1
1
2
1
1
1
1
2
1
1
2
2
HANDLE
WELDMENT, LH Control Arm
FOAM GRIP, Handle
3
4
BUSHING
5
WELDMENT, Control Bracket, LH
WASHER, 5/8 ID x 1.00 OD x .065 Nylon
WASHER, 5/8” Flat SAE
6
7
8
WASHER, .64 x 1.12 x .028 Beveled
NUT, 5/8-18 Hex Jam
9
10
11
12
13
SHOULDER BOLT, 3/8-16
THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
FLANGE BEARING, 9/16 I.D. P.M.
NUT, 3/8-16 Hex Nyloc
2.013 long shoulder
powdered metal
or 7091585, 3/8-16 Hex Center
Lock Nut
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
7900003
5022978
7200006
7100415
7091603
7900002
7200005
7900029
7092126
7091686
7300009
7300010
7043302
7091304
7091619
7300264
7091095
7500349
1
1
1
2
2
1
1
2
2
8
1
1
1
4
4
1
2
1
SHOULDER BOLT, 5/16 x 1/4-20
DAMPENER, Hydraulic
.800 long shoulder
SPACER, 9/16 OD x 12GA x .325
WASHER, 1/4” I.D. Flat
case hardened steel
or item 22
NUT, 1/4-20 Hex Nyloc
SHOULDER BOLT, 5/16 x 1/4-20
SPACER, 9/16 OD x 12GA x .899
SCREW, 1/4-20 x1-1/4” Hex Head Cap, GR 5
NUT 1/4-20 Hex Center Lock, GR 5 YZ
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
PLATE, Fwd/Rev Adjust
1.360 long shoulder
TRACK, Control Stick L.H.
CONTROL BRACKET, LH
SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
NUT, 3/8-16 Hex Flange Lock
BRACKET, Rod Holder, RZT
POP RIVET, 1/8 x 3/8”
ASSEMBLY, Fwd/Rev Rod
(was 7500059); incl. items 31,
33, 34, 35 & 36
31
32
33
34
35
36
7027936
7091497
7091630
7090517
7074511
7200009
1
1
3
3
1
1
ROD END
SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR 5
NUT, 3/8-24 Hex, GR B, YZ
WASHER, 3/8” Flat
SPRING, Compression (Brake)
ROD, Link Fwd./Rev. (3/8-24 thread)
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
13
CONTROL GROUP, LH
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
14
CONTROL GROUP, LH
Item Part No
Qty Description
Note
37
38
39
40
7900000
7091594
7100487
7300489
1
1
1
1
CLEVIS PIN, 7/16 x 1”
COTTER PIN, 1/2 Self Locking, YZ
CLIP, Spring
BRACKET, Fender Support, LH RZT
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
15
CONTROL GROUP, RH
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
16
CONTROL GROUP, RH
Item Part No
Qty Description
Note
1
7043338
7200004
7100051
7900029
7092126
7091628
7013874
7400001
7900016
7027344
7011121
7090658
7091686
7300009
7300008
7400006
7091304
7091619
7300032
7023355
7090913
7091299
7014409
1670971
7200012
7900003
7900002
5022978
7200006
7100415
7091603
7200005
7091497
7500059
7027936
7091630
7090517
1
1
1
2
2
1
2
1
1
1
1
2
6
1
1
1
4
4
1
1
2
2
2
1
1
1
1
1
1
2
2
1
1
1
1
3
3
HANDLE
2
ROD, Handle R.H.
3
FOAM GRIP, Handle
4
SCREW, 1/4-20 x1-1/4” Hex Head Cap, GR 5
NUT 1/4-20 Hex Center Lock, GR 5 YZ
WASHER, .64 x .99 x .05 Flat, YZ
BUSHING
5
6
7
8
WELDMENT, Control Bracket, RH
WASHER, 5/8 ID x 1.00 OD x .065 Nylon
WASHER, 5/8 SAE Flat
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
WASHER, .64 x 1.12 x .028 Beveled
NUT, 5/8-18 Hex Jam
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
PLATE, Fwd/Rev Adjust
TRACK, Control Stick, R.H.
WELDMENT, Lift Bracket
SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
NUT, 3/8-16 Hex Flange Lock
BRACKET, Switch
SWITCH- DPDT
also shown in Electrical Group
powdered metal
SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
NUT, 3/8-16 Hex Nyloc
FLANGE BEARING, 9/16 I.D. P.M.
THRUST WASHER, .562 ID x 1.000 OD x .030/.032 Thick
SHOULDER BOLT, 3/8-16
2.013 long shoulder
.800 long shoulder
1.360 long shoulder
SHOULDER BOLT, 5/16 x 1/4-20
SHOULDER BOLT, 5/16 x 1/4-20
DAMPENER, Hydraulic
SPACER, 9/16 OD x 12GA x .325
WASHER, 1/4” I.D. Flat
case hardened steel
incl. next 5 items
NUT, 1/4-20 Hex Nyloc
SPACER, 9/16 OD x 12GA x .899
SCREW, 3/8-16 x 1-1/2” Hex Head Cap, GR 5
ASSEMBLY, Fwd/Rev Rod
ROD END
34
35
36
NUT, 3/8-24 Hex, GR B, YZ
WASHER, 3/8” Flat
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
17
CONTROL GROUP, RH
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
18
CONTROL GROUP, RH
Item Part No
Qty Description
Note
37
38
39
40
41
7074511
7200009
7900000
7091594
7300354
1
1
1
1
1
SPRING, Compression (Brake)
ROD, Link Fwd./Rev. (3/8-24 thread)
CLEVIS PIN, 7/16 x 1”
COTTER PIN, 1/2 Self Locking, YZ
BRACKET, Fender Support, RH
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
19
PARK BRAKE GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
20
PARK BRAKE GROUP
Item Part No
Qty Description
Note
1
2
7090913
7091298
7091811
7043312
7091601
7024159
7200007
7043311
7091192
7025074
7011078
7043335
7091294
7100100
7300007
7091495
7091705
2
1
2
1
2
1
1
1
1
1
1
1
2
1
1
2
1
SCREW, #10-24 x 1/2” Hex Washer Self-Tap (Torx)
NUT, 5/16-18 Hex Nyloc
3
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
BRACKET, Park Brake, LH Lower
NUT, 5/16-18 Hex Flange Lock, GR 5
COTTER PIN, 3/8” Self-Locking
ROD, Park Brake
4
5
6
7
8
BRACKET, Park Brake, RH Lower
WASHER, 1/2 x .090 Flat
9
10
11
12
13
14
15
16
17
WASHER, .531 x 1.0 x .063 Flat
SHOULDER BOLT, 5/16-18 x 1”
ROD, Park Brake (1/4-20 thread)
WASHER, .28 x .63 x .06 Flat, GR 5
SPRING, Compression
.220 long shoulder
BRACKET, Park Brake
SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
NUT, 1/4-20 Hex Top Lock, GR B
or 7092126, 1/4-20 Hex Center
Lock Nut, Grade 5
18
19
20
21
22
23
24
7090122
7091594
7900005
7091603
7091290
7043310
7023355
2
3
1
4
1
1
1
WASHER, 3/8” Flat SAE
COTTER PIN, 1/2 Self Locking, YZ
ROD, Hanger (1/4-20 both ends)
NUT, 1/4-20 Hex Nyloc YZ
NUT, 10-24 Hex Nyloc
HOOK, Park Brake
SWITCH- DPDT
also shown in Electrical Group
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
21
SNAPPER FENDER GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
22
SNAPPER FENDER GROUP
Item Part No
Qty Description
Note
1
2
7100007
7100006
7091811
7011791
7090951
7300178
7091819
7300112
7090999
7023295
7300283
7091905
7091601
7100112
7091890
7100825
7100012
7900023
1
1
4
4
4
1
2
1
5
3
1
2
2
1
2
2
1
2
FENDER, LH RZT
FENDER, RH RZT
3
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
BOLT RETAINER, 5/16” Black
4
5
NUT, 5/16-18 Hex Large Flange Center Lock
COVER, Front, Snapper
6
7
SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap, YZ
PANEL, Control
8
9
SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
U-NUT 1/4-20
10
11
12
13
14
15
16
17
18
BRACKET, RH Fender Support (Cardinal Red)
BOLT, 5/16-18 x 7/8” Hex Flange Lock, YZ
NUT, 5/16-18 Hex Flange Lock, GR 5
COVER, Engine, Double Vent
WASHER, 1/4” Internal/External Tooth Lock
3-PRONG KNOB, 1/4-20 x 1/2”
GUARD, Rear Seat
was 7023341
SCREW, 1/4-15 x 1-1/4” Hex Washer Self-Tap
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
23
SEAT GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
24
SEAT GROUP
Item Part No
Qty Description
ASSEMBLY, 15” Seat, w/Armrests
Note
1
2
7100005
7300057
7023191
7090187
7043316
7091304
7090390
7091619
7091591
7074218
7091298
7200008
7024159
7011078
7091742
7091315
7014098
7028620
7043308
7091318
7091601
7091198
1
1
2
2
1
2
2
2
2
2
4
1
1
2
2
2
2
2
1
2
2
1
Ref. Michigan Seat Co.
SEAT PLATE
3
KNOB, Three Prong, 5/16-18 thread
WASHER, 5/16” Split Lock
4
5
BRACKET, Seat Support
6
SCREW, 3/8-16 x 1” Hex Head Cap, GR 5, YZ
WASHER, 3/8” Internal Tooth Lock
NUT, 3/8-16 Hex Flange Lock
7
8
9
BOLT, 5/16-18 x 1” Hex Flange Lock, GR 5, YZ
SPRING, Compression- Seat Support
NUT, 5/16-18 Hex Nyloc
10
11
12
13
14
15
16
17
18
19
20
21
22
ROD, Seat Hinge
COTTER PIN, 3/8” Self-Locking
SHOULDER BOLT, 5/16-18 x 1”
SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR 5
WASHER, 5/16” Split Lock
.220 long shoulder
WASHER, .34 x 1.0 x .09 Flat
SPACER, .340 I.D. x .63 O.D. x .310 Thick
BRACKET, Lower Seat
SCREW, 5/16-18 x 3/4” Hex Head Cap, GR 5, YZ
NUT, 5/16-18 Hex Flange Lock, GR 5
HWST, 3/8-16 X5/8 (See image note about 12 & 13)
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
25
ENGINE GROUP (18.5 HP Briggs)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
26
ENGINE GROUP (18.5 HP Briggs)
Item Part No
Qty Description
* ENGINE, 18.5 HP Briggs, Intek
Note
1
1730219
7090324
7043343
7013250
1717664
7029138
7091301
7092130
1726498
7900020
7091867
7028564
7100529
7091195
7090999
7100797
7090390
7090155
7012080
7100101
7100160
7015352
7091315
7091738
7090290
7300237
7091495
7091294
7090052
7091576
7078234
1
4
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
3
1
1
1
3
2
2
1
1
2
1
1
1
Model 31P777 0121 B1
2
SCREW, 3/8-16 x 1” Hex Washer Self-Tap
ASSEMBLY, Engine Pulley
3
4
KEY, 1/4 Square x 1”
5
CLUTCH, Ogura JD-11
6
WASHER, .468 ID x 1.50 OD x .188 Flat
WASHER, 7/16” Split Lock
7
8
SCREW, 7/16-20 x 4-1/2” Hex Head Cap, GR 5
HOSE, Oil Drain
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
HARNESS CLIP, 5/8”
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR 2
CABLE, 26.25” Throttle Control
KNOB, Throttle, Red RZT
SCREW, #10-16 x 3/4” Pan Head Self-Tap
SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
CABLE, 30” Choke Control
WASHER, 3/8” Internal Tooth Lock
NUT, 3/8-24 Hex, GR B
CABLE TIE, 7”
MANIFOLD, 18 HP B&S Intek
MUFFLER, RZT
GASKET, Exhaust
WASHER, 5/16” Split Lock
SET SCREW, 5/16-18 x 3/4” Socket Head, GR 8
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
BRACKET, Muffler 18HP Briggs
SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
WASHER, .28 x .63 x .06 Flat, GR 5
WASHER, 1/4” Split Lock
NUT, 1/4-20 Hex, GR 5 or B
ASSEMBLY, Clamp
B&S P/N's 223434, 93877 &
93203
32
33
34
35
36
37
7500077
7100037
7100283
7012337
7075288
1715917
1
1
1
1
1
1
ASSEMBLY, Fuel Tank, RZT
FUEL TANK, 3 Gal.
DIP TUBE
includes items 33 thru 37
GROMMET
ELBOW, 90 Degree
CAP, Fuel, 3-1/2”
Footnotes:
NOTE: * Purchase engine parts from engine manufacturer dealer.
RZT TWIN STICK HYDRO DRIVE 250 Z
Manual No.
7006460
SERIES 0 & 1
TP 400-5164-C-HZ-N
27
ENGINE GROUP (18.5 HP Briggs)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
28
ENGINE GROUP (18.5 HP Briggs)
Item Part No
Qty Description
Note
38
39
40
41
42
43
44
45
46
47
7012222
7073240
7016325
7100312
7091908
7090188
7091511
7091928
7091601
7100666
4
2
1
1
1
2
1
1
2
1
CLAMP, Fuel Line
HOSE, Fuel, 5”
VALVE, Fuel Shut-Off
SEAL, Tank
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
WASHER, .34 x .69 x .08 Flat
NUT, 5/16-18 Hex, GR 5 or B
BOLT, 5/16-18 x 1-1/4” Square Neck Carriage
NUT, 5/16-18 Hex Flange Lock, GR 5
CLAMP, Muffler
B&S part # 222825
Footnotes:
NOTE: * Purchase engine parts from engine manufacturer dealer.
RZT TWIN STICK HYDRO DRIVE 250 Z
Manual No.
7006460
SERIES 0 & 1
TP 400-5164-C-HZ-N
29
ENGINE GROUP (20 HP Briggs)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
30
ENGINE GROUP (20 HP Briggs)
Item Part No
Qty Description
* ENGINE, 20 HP Briggs Intek Twin
Note
1
1729722
7090324
7043343
7013250
1717664
7029138
7091301
7092130
1726498
7900020
7091867
7075449
7100529
7091195
7090999
7100416
7090390
7090155
7012080
7078122
7100160
7063283
7091315
7091738
7091906
7300238
7091495
7091294
7090052
7091576
7078234
1
4
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
3
1
1
2
5
4
5
1
1
2
1
1
1
Model 441577 0118 B1
2
SCREW, 3/8-16 x 1” Hex Washer Self-Tap
ASSEMBLY, Engine Pulley
3
4
KEY, 1/4 Square x 1”
5
CLUTCH, Ogura JD-11
6
WASHER, .468 ID x 1.50 OD x .188 Flat
WASHER, 7/16” Split Lock
7
8
SCREW, 7/16-20 x 4-1/2” Hex Head Cap, GR 5
HOSE, Oil Drain
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
HARNESS CLIP, 5/8”
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap, GR 2
CABLE, 48” Throttle Control
B&S 16HP Single Intek
KNOB, Throttle, Red RZT
SCREW, #10-16 x 3/4” Pan Head Self-Tap
SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
CABLE, 54” Choke Control
WASHER, 3/8” Internal Tooth Lock
NUT, 3/8-24 Hex, GR B
CABLE TIE, 7”
MANIFOLD, B&S V-Twin Intek
MUFFLER, RZT
GASKET, Exhaust, 20 HP Intek
WASHER, 5/16” Split Lock
SET SCREW, 5/16-18 x 3/4” Socket Head, GR 8
SCREW, 1/4-20 x 3/4” Hex Head Flange, GR 5, YZ
BRACKET, Muffler 20/22HP Briggs
SCREW, 1/4-20 x 3/4” Hex Head Cap, GR 5
WASHER, .28 x .63 x .06 Flat, GR 5
WASHER, 1/4” Split Lock
NUT, 1/4-20 Hex, GR 5 or B
ASSEMBLY, Clamp
B&S P/N's 223434, 93877 &
93203
32
33
34
35
36
37
7500077
7100037
7100283
7012337
7075288
1715917
1
1
1
1
1
1
ASSEMBLY, Fuel Tank, RZT
FUEL TANK
includes items 33 thru 37
DIP TUBE
GROMMET
ELBOW, 90 Degree
CAP, Fuel, 3-1/2”
Footnotes:
NOTE: * Purchase engine parts from engine manufacturer dealer.
RZT TWIN STICK HYDRO DRIVE 250 Z
Manual No.
7006460
SERIES 0 & 1
TP 400-5164-C-HZ-N
31
ENGINE GROUP (20 HP Briggs)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
32
ENGINE GROUP (20 HP Briggs)
Item Part No
38 7012222
Qty Description
Note
4
1
1
1
1
1
2
1
1
1
1
2
1
CLAMP, Fuel Line
39A 7073240
39B 7029982
HOSE, Fuel, .25 I.D. x 5” long
HOSE, Fuel, .25 I.D. x 14” long
VALVE, Fuel Shut-Off
40
41
42
43
44
45
46
47
48
49
7016325
7100312
7091908
7090188
7091511
7200055
225477
SEAL, Tank
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5, YZ
WASHER, .34 x .69 x .08 Flat
NUT, 5/16-18 Hex, GR 5 or B
TUBE, Manifold Extension
Bracket, Fuel Pump
Briggs part
7091928
7091601
7100666
BOLT, 5/16-18 x 1-1/4” Square Neck Carriage
NUT, 5/16-18 Hex Flange Lock, GR 5
CLAMP, Muffler
B&S part # 222825
Footnotes:
NOTE: * Purchase engine parts from engine manufacturer dealer.
RZT TWIN STICK HYDRO DRIVE 250 Z
Manual No.
7006460
SERIES 0 & 1
TP 400-5164-C-HZ-N
33
DECAL GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
34
DECAL GROUP
Item Part No
Qty Description
DECAL, Ignition, RZT
Note
1
2
7100467
7100335
7100334
7100505
7100413
7100331
7100340
7100333
7100332
7100341
7046720
7013010
7100420
7100421
7026154
7024910
1
1
1
1
1
1
1
1
1
1
1
2
1
1
1
1
1
DECAL, Snapper Fender, RH
DECAL, Snapper Fender, LH
DECAL, Snapper
3
4
5
DECAL, Throttle Control, RZT
DECAL, Warning, Operation
DECAL, Height Of Cut, RZT
DECAL, Motion Control, RZT
DECAL, Park Brake, RZT
DECAL, Roll Release, RZT
DECAL, Chute/Deflector
DECAL, Danger, (Cut Finger)
DECAL, 250 Z 18.5HP RZT
DECAL, 250 Z 20HP RZT
DECAL, 38 Inch
6
7
8
9
10
11
12
13
14
15
16
17
DECAL - 42 INCH
DECAL, OPEI Walk/Ride
not shown, not a service part
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
35
DECK LIFT GROUP (38/42)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
36
DECK LIFT GROUP (38/42)
Item Part No
Qty Description
Note
1
7300037
7091588
1722302
7400011
7100210
7090122
7091585
7027172
7091603
7091619
7026196
7091658
7028037
7100125
7300024
7091503
7014981
7300028
7090289
7091811
7091601
7200019
7091299
7200028
7032030
1
2
1
1
2
8
8
4
4
2
1
6
2
2
2
4
2
2
2
4
4
1
2
2
2
HANDLE, Deck Lift
2
BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR 5, YZ
HANDLE GRIP, Black Flexible (Simplicity)
WELDMENT, Deck Lift, 38/42
LINK, Leveling, 3/8-16 thread (2)
WASHER, 3/8” Flat SAE
3
4
5
6
7
NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
SCREW, 1/4-20 x 5/8” Hex Head Cap. GR 5
NUT, 1/4-20 Hex Nyloc
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
NUT, 3/8-16 Hex Flange Lock
FLANGE BEARING, 3/4” I.D.
JAM NUT, 3/8-16, YZ
powdered metal
SWIVEL, Inline Brake Arm
PIN, Quick Hitch
BAR, Rear Lift, 38/42
HAIR PIN, 3/32 x 1-1/2”
SHOULDER BOLT, 3/8-24, GR 8
BRACKET, Deck Hanger
.285” long shoulder
NUT, 3/8-24 Hex Center Lock
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
NUT, 5/16-18 Hex Flange Lock, GR 5
ROD, Deck Hanger Front 38/42
NUT, 3/8-16 Hex Nyloc
SWIVEL, 3/8-16 Inline
WASHER, 13/32 x 1-1/4” Flat
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
37
38" DECK GROUP (Sub-Assembly)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
38
38" DECK GROUP (Sub-Assembly)
Item Part No
Qty Description
Note
1
2
7300271
7059377
7010817
7072440
7100278
7090658
7090595
7091601
7300031
7091026
7091602
7400090
7090850
1
2
DECK, 38 RZT (Cardinal Red)
was 7300160 (Raw 38” Deck)
ASSEMBLY, 38” Spindle
3
1
FITTING, Lube, Press-In (for .187 dia. Hole)
SPACER, 38 Spindle Pulley
4
2
5
2
PULLEY, 5.0 O. D.
6
2
NUT, 5/8-18 Hex Jam
7
14
19
1
BOLT, 5/16-18 x 3/4” Hex Flange Lock
NUT, 5/16-18 Hex Flange Lock, GR 5
BRACKET, Front, 38” RZT
8
9
10
11
12
13
2
BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR 5
BOLT, 5/16-18 x 1-1/2” Hex Flange Lock, GR 5
WELDMENT, Idler Bracket
2
1
3
BOLT, 3/8-16 x 3/4” Short Square Neck Carriage, GR 5
or 7091640 (3/8-16 x 1”
Carriage Bolt)
14
15
16
17
18
19
20
21
7400060
7400061
7090613
7079832
7090122
7091775
7200039
7013847
1
1
3
1
3
3
1
1
1
1
2
1
2
1
1
1
1
1
2
1
1
1
1
1
WELDMENT, 38” Deck Support, RH
WELDMENT, 38” Deck Support, LH
NUT, 3/8-16 Hex Flange Lock
SCREW, 3/8-16 x 1” Hex Head Cap, GR 5
WASHER, 3/8” Flat SAE
WASHER, Special
SPACER, .380 I. D. x .895 long
RETAINER, 3/8” Bolt
22A 7034422
22B 7100448
PULLEY, Flat Idler 5” x .375
PULLEY, Flat Idler 4” x 1.24
23
24
25
26
27
28
29
30
31
32
33
34
35
36
7091585
7011201
7025074
7400082
7014871
7042964
7090037
7028620
7091528
7091575
7091305
7091557
7091962
7091331
NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
NUT, 3/8-24 Hex Center lock
WASHER, .531 x 1.0 x .063 Flat
WELDMENT, Idler Arm, 38” RZT
LUBE FITTING, 3/16”
IDLER STUD (5/16-24 thread)
COTTER PIN, 3/32 x 3/4”
SPACER, .340 I.D. x .63 O.D. x .310 Thick
WASHER, 3/8” Flat
NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
SCREW, 3/8-16 x 2” Hex Head Cap, GR 5
SCREW, 3/8-16 x 2-3/4” Hex Head Cap, GR 5
WASHER, 7/16” I.D. x 1-5/8” O.D. x .25 Flat
WASHER, 3/8” I.D. x 1-1/2” O.D. x .120 Flat
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
39
38" DECK GROUP (Final Assembly)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
40
38" DECK GROUP (Final Assembly)
Item Part No
Qty Description
Note
1
2
7029425
7035503
7091585
7035813
7035502
7091575
7091508
7091833
7090188
7036543
7091305
7090122
7034422
1
1
2
1
1
1
1
1
1
1
1
8
1
DISCHARGE CHUTE, 38” Deck
ROD, Mounting, Side Discharge (3/8-16 thread)
NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
SPRING, Torsion-Side Discharge-38 Deck
ROD, Pivot, Side Discharge, 38 Deck
NUT, 5/16-18 Hex Center Lock, GR 5 or B, YZ
BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
SCREW, 5/16-18 x 5/8” Cross Recessed Pan Head
WASHER, .34 x .69 x .08 Flat
3
4
5
6
7
8
9
10
11
12
13
TEENUT, 5/16-18 Thread
SCREW, 3/8-16 x 2” Hex Head Cap, GR 5, YZ
WASHER, 3/8” Flat SAE
PULLEY, Flat Idler, 5” Dia.
replaces 7072319 (PULLEY,
Flat Idler, 3-1/4” Dia.)
14
15
16
17
18
7035969
7033891
7091026
7091601
2108765
1
1
9
9
3
SPRING, Extension, 1.03 Dia. x 6.8 Long
GAGE WHEEL BRACKET, LH Rear
BOLT, 5/16-18 x 3/4” Short Square Neck Carriage, GR 5
NUT, 5/16-18 Hex Flange Lock, GR 5
SHOULDER BOLT, 3/8-16 x 5/8” GR 5 YZ
replaces 7091526 (Shoulder
Bolt, 3/8-24 thread)
19
20
1714760
7091585
3
3
GAGE WHEEL 4 x 1-7/8” Offset
NUT, 3/8-16 Hex Center Lock
replaces 7026122 (Wheel, 1-1/2”
offset)
replaces 7090289 (Hex Center
Lock Nut, 3/8-24)
21
22
23
7300269
7300243
7100691
1
1
1
BRACKET, Front Gage Wheel (Cardinal Red)
BRACKET, Right Front Gage Wheel (Cardinal Red)
BELT, A Section, Effective Length 114”
was 7033756 (raw part)
was 7035494 (raw part)
replaces 1718017
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
41
38" DECK SPINDLE
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
42
38" DECK SPINDLE
Item Part No
Qty Description
Note
1
2
3
4
5
6
7
8
9
7012491
7013313
7059378
7010817
7072537
7072109
7042998
7024467
7091633
2
2
1
1
1
1
1
2
1
* RING, 1-3/4” External Retaining Ring
* BALL BEARING, 3/4” I.D.
* WELDMENT, 38 Spindle Housing
* FITTING, Lube, Press-In (for .187 dia. Hole)
* SHAFT, Spindle (7.155” long)
* WASHER, Spindle Blade
* BLADE, 19.64 (38” Deck)
* WASHER, Bellville 9/16 x 1-3/4”
* NUT, 9/16-18 Hex, GR B
Footnotes:
NOTE: * These parts make up 7059377, Spindle Assembly.
RZT TWIN STICK HYDRO DRIVE 250 Z
Manual No.
7006460
SERIES 0 & 1
TP 400-5164-C-HZ-N
43
42" DECK GROUP (Sub-Assembly)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
44
42" DECK GROUP (Sub-Assembly)
Item Part No
Qty Description
Note
7500021
1
1
SUB-ASSY, 42” Deck w/Spindles
includes 18 items below
1
2
7400009
7059723
7027198
7091619
7091640
7033366
7051747
7044651
7090289
7090122
7025074
7400083
7014871
7091526
7090872
7010916
7092126
7014241
WELDMENT, 42” Deck
2
ASSEMBLY, Spindle Brake
see 42” Deck Spindle pages
3
15
17
4
BOLT, 3/8-16 x 1” Hex Flange Lock, GR 5
NUT, 3/8-16 Hex Flange Lock
4
5
BOLT, 3/8-16 x 1” Square Neck Carriage, GR 5, YZ
SPINDLE BRACE
6
2
7
2
ASSEMBLY, Spindle Lock
w/strux nut
8
1
WELDMENT, Stationary Idler 42”
NUT, 3/8-24 Hex Center Lock
9
1
10
11
12
13
14
15
16
17
18
1
WASHER, 3/8” Flat SAE
2
WASHER, .531 x 1.0 x .063 Flat
WELDMENT, Idler Arm, 38” RZT (Cardinal Red)
LUBE FITTING, 3/16”
1
1
or 7010817
1
SHOULDER BOLT, 3/8-24 x 5/8” YZ
BOLT,1/4-20 x 1-1/8” Hex Flange Lock, GR 5
SPACER, .265 I.D. x .375 O.D. x .300 thick
NUT 1/4-20 Hex Center Lock, GR 5 YZ
WASHER, .27 x 1.0 x .065 Flat
1.530” long shoulder
1
1
2
5
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
45
42" DECK GROUP (Final Assembly)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
46
42" DECK GROUP (Final Assembly)
Item Part No
Qty Description
Note
1
2
7500021
7035969
7035835
7091585
1714760
2108765
7100419
7091328
7091619
7091303
7500185
1
1
4
6
4
4
1
8
8
2
1
SUB-ASSY, 42” Deck w/Spindles
Ref. Sub-Assembly pages
SPRING, Extension, 1.03 Dia. x 6.8 Long
POST, Anti-Scalp
3
4
NUT, 3/8-16 Hex Center Lock, GR 5 or B, YZ
WHEEL, GAGE 3.92 X 1.87
5
replaces 7029264
replaces 7029265
6
BOLT, SHOULDER (3/8-16 thread)
42” BELT, A Section, 119.25 Effective Length
SCREW, 3/8-16 x 1-1/4” Hex Head Cap, GR 5 YZ
NUT, 3/8-16 Hex Flange Lock
7
8
9
10
11
BOLT, 5/16-18 x 1” Short Square Neck Carriage, GR 5
ASSEMBLY, 42” Chute & Decal
Cardinal Red Chute 7400116
plus decal 7013010
12
13
14
15
16
17
18
19
20
21
22
7091601
7023606
7090799
7011791
7091315
7091537
7091305
7018574
7090122
7091553
7075707
2
2
2
2
2
2
1
1
5
1
1
NUT, 5/16-18 Hex Flange Lock, GR 5
VINYL CAP
BOLT, 5/16-18 x 5/8” Short Square Neck Carriage, GR 5
BOLT RETAINER, 5/16” Black
WASHER, 5/16” Split Lock
WING LOCKNUT, 5/16-18- YZ
SCREW, 3/8-16 x 2” Hex Head Cap, GR 5 YZ
PULLEY, Flat Idler 4-1/8” Dia.
or 7091553 (1-3/4” long)
WASHER, 3/8” Flat SAE
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR 5 YZ
PULLEY, Flat Idler (4.00 O.D.)
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
47
42" DECK SPINDLE
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
48
42" DECK SPINDLE
Item Part No
Qty Description
Note
1
2
7074467
7014407
7036437
7012491
7013313
7027668
7047917
7032294
7026691
7012063
7090824
7010817
1
1
1
2
2
1
1
1
1
2
2
1
NUT, 3/4-16 Hex Jam, GR 8
*WASHER, Spindle (Special)
PULLEY, 5-1/4” O.D. w/hub
*RING, 1.85” Internal Retaining
*BEARING, Spindle
3
4
5
6
*SHAFT, Blade Spindle (6.500 overall length)
*WELDMENT, Spindle Housing
*BLADE HOLDER
7
8
9
BLADE, 21” Standard Lift
10
11
12
WASHER, Cone
SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR 5
*LUBE FITTING, 3/16” Press-In
Footnotes:
*NOTE: These parts make up 7059723, Spindle Assembly.
RZT TWIN STICK HYDRO DRIVE 250 Z
Manual No.
7006460
SERIES 0 & 1
TP 400-5164-C-HZ-N
49
ELECTRICAL GROUP
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
50
ELECTRICAL GROUP
Item Part No
Qty Description
Note
1
2
7075622
7027230
7091584
7073090
7091686
7100326
7075132
1722611
7023354
7023355
7100309
7100308
7026343
7023787
7023506
7091294
7090372
7090072
7100449
7016132
1
2
6
1
2
1
1
1
1
2
1
1
1
1
1
4
3
2
1
1
SOLENOID - Super Trombetta- 2 Terminal
SCREW, 1/4-20 x 1” Hex Head Cap, GR 5
NUT, 1/4-20 Hex Flange Lock, GR 5
12 VOLT DC POWER OUTLET
SCREW, 1/4-20 x 3/4” Hex Washer Self-Tap
HOUR METER, Inductive
3
4
5
6
7
SWITCH, PTO, Yellow
8
PLUG, Plastic Black
9
SWITCH, Seat (NC)
10
11
12
13
14
15
16
17
18
19
20
SWITCH- DPDT (NC/NO) (Grey)
BATTERY BRACKET
BATTERY HOLD DOWN
SWITCH, Ignition-Afterfire Solenoid
MACHINERY BUSHING
includes set of keys
BEZEL
WASHER, .28 x .63 x .06 Flat, GR 5
NUT, 1/4-20 Hex Center Lock, GR 5 or B
SCREW, 1/4-20 x 5/8” Hex Head Cap, GR 5
BATTERY, 12 VOLT, 230 CCA
SPACER, .65 x .88 x .10
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
51
WIRING HARNESS
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
52
WIRING HARNESS
Item Part No
Qty Description
Note
1
2
3
4
4
7100306
7100307
7100324
7042956
7100636
1
1
1
2
1
WIRING HARNESS, Briggs RZT
CABLE, Battery Positive RZT, Red 20” #6 AWG
WIRING HARNESS, Hour Meter, RZT
WIRE, Negative, #8 AWG 14”
WIRE, Negative, #8 AWG 20”
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
53
WIRING SCHEMATIC (Briggs Engine)
Manual No.
7006460
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
TP 400-5164-C-HZ-N
54
WIRING SCHEMATIC (Briggs Engine)
Item Part No
Qty Description
WIRING HARNESS, Briggs 18 & 20 HP
Note
7100306
1
Footnotes:
RZT TWIN STICK HYDRO DRIVE 250 Z
SERIES 0 & 1
Manual No.
7006460
TP 400-5164-C-HZ-N
55
Parts Manual for
RZT TWIN STICK HYDRO DRIVE 250 Z
38" & 42"
SERIES 0 & 1
IT IS THE POLICY OF BRIGGS & STRATTON CORP TO IMPROVE ITS
PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.
WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS
McDonough, GA, 30253 U.S.A.
Briggs & Startton Yard Power Products Group
Manual No.
7006460
Copyright © 2007
Briggs & Startton Corporation
Milwaukee, WI USA. All Rights Reserved
Revision C, 10/30/2007
TP 400-5164-C-HZ-N
|