1
T
M
T h a n k Y o u f o r S e l e c t i n g
The Powerful Self-Propelled High Wheel Mower
Operator Owner's Manual
HW650SP
Patent Pending
2
Accessories
3
Specifications
Mulching Kit
HW650SP
P/N 510202
Engine: HP
Engine:Type
Engine: Fuel cap.
Engine: Oil Cap.
Weight: Unit
6.5 HP (4.85 kW)
B&S OHV
1.6 qt. (1.5 L)
0.63 qt. (0.6 L)
154 # (70.0 Kg)
167 # (77.7 Kq)
Reduces lawn clippings to fine
nutrient-rich particles that filter
down to the soil.
Grass Catcher Kit
P/N 510223
Easily convert your mower to bag
grass and leaves.
Weight: Shipping
UNIT SIZE: OVERALL LENGTH - 82.5"(2.09 m)
OVERALL WIDTH - 32.0" (0.81m)
OVERALL HEIGHT - 43" (1.09m)
Part No. 510153
Form No. F102802D
Page 1 of 12
9
GENERAL SAFETY
For your safety and the safety of others, these directions should be followed:
Do not operate this machine without first reading
owner's manual and engine manufacturer's manual.
DO NOT:
Do not mow near drop-offs, ditches, or embankments. The opera-
tor could lose footing or balance.
Do not mow excessively steep slopes.
Use of Ear Protection is recommended while
operating this machine.
Use of Eye and Breathing protection is recom-
mended when using this machine.
Do not mow on wet grass. Reduced footing could cause slipping.
This cutting machine is capable of amputating hands and feet and
throwing objects. Failure to observe the following safety instructions
could result in serious injury or death.
III. Children
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the mower
and the mowing activity. Never assume that children will remain
where you last saw them.
I. General Operation
1. Read, understand, and follow all instructions on the machine and
in the manual(s). Be thoroughly familiar with the controls and the
proper use of the mower before starting.
1. Keep children out of the mowing area and under the watchful
care of a responsible adult.
2. Be alert and turn mower off if children enter the area.
3. Before and while moving backwards, look behind and down
for small children.
4. Never allow children to operate the mower.
5. Use extra care when approaching blind comers, shrubs, trees,
or other objects that may obscure vision.
2. Do not put hands or feet near or under rotating parts. Keep clear
of the discharge opening at all times.
3. Only allow responsible individuals, who are familiar with the
instructions, to operate the mower.
4. Clear the area of objects such as rocks, toys, wire, bones, sticks
etc., which could be picked up and thrown by the blade.
5. Be sure the area is clear of other people before mowing. Stop
mower if anyone enters the area.
6. Do not operate the mower when barefoot or wearing open
sandals. Always wear substantial foot wear.
IV. Service
1. Use extra care in handling gasoline and other fuels. They are
flammable and vapors are explosive.
a)Use only an approved container.
7. Do not pull mower backwards unless absolutely necessary. Look
down and behind before and while moving backwards.
8. Do not operate the mower without proper guards, plates, grass
catcher or other safety protective devices in place.
9. See manufacturer’s instructions for proper operation and
installation of accessories. Only use accessories approved by
the manufacturer.
b)Never remove gas cap or add fuel with the engine running.
Allow engine to cool before refueling. Do not smoke.
c)Never refuel the machine indoors.
d)Never store the machine or fuel container inside where there
is an open flame, such as a water heater.
2. Never run an engine inside a closed area.
3.Never make adjustments or repairs with the engine (motor)
running. Disconnect the spark plug wire, and keep the wire away
from the plug to prevent accidental starting.
4. Keep all nuts and bolts, especially blade attachment bolts, tight
and keep equipment in good condition.
10. Stop the blade(s) when crossing gravel drives, walks, or roads.
11. Stop the engine (motor) whenever you leave the equipment,
before cleaning the mower or unclogging the chute.
12. Shut the engine (motor) oft and wait until the blade comes to
complete stop before removing grass catcher.
5. Never tamper with safety devices. Check their proper operation
regularly.
6. Keep mower free of grass, leaves, or other debris build-up.
Clean up oil or fuel spillage. Allow mower to cool before storing.
7. Stop and inspect the equipment if you strike an Object. Repair,
if necessary, before restarting.
8. Never attempt to make wheel height adjustments while the
engine (motor) is running.
9. Always disconnect electric mowers (live operated) before
cleaning, repairing, or adjusting.
13. Mow only in daylight or good artificial light.
14. Do not operate the mower while under the influence of alcohol
or drugs.
15. Never operate mower in wet grass. Always be sure of your footing;
keep a firm hold on the handle and walk; never run.
16. Disengage the self-propelled mechanism or drive clutch on
mowers so equipped before starting the engine (motor).
17. If the equipment should start to vibrate abnormally, stop the
engine (motor) and check immediately for the cause. Vibration is
generally a warning of trouble.
10. Grass catcher components are subject to wear, damage, and
deterioration, which could expose moving parts or allow objects
to be thrown. Frequently check components and replace with
manufacturer’s recommended parts, when necessary.”
11. Mower blades are sharp and can cut. Wrap the blade(s) or
wear gloves, and use extra caution when servicing them.
12. Do not change the engine governor setting or overspeed
the engine.
18. Always wear safety goggles or safety glasses with side shields
when operating mower.
II. Slope Operation
Slopes are a major factor related to slip and fall accidents which can
result in severe injury. All slopes require extra caution. If you feel
uneasy on a slope, do not mow it.
DO:
Mow across the face of slopes; never up and down. Exercise extreme
caution when changing direction on slopes.
Remove objects such as rocks, tree limbs, etc. Watch
for holes, ruts, or bumps. Tall grass can hide obstacles.
Page 3 of 12
Part No. 510153
Form No. F102802D
13
11
12
CONTROLS
ASSEMBLY
LITERATURE ASSY P/N 500263
Throttle Control
Literature Checklist
Read all safety and operating
instructions before assem-
bling or starting this unit.
FIXED THROTTLE
Engine speed is factory set.
Check
Owner's
Owner's
Speed Control
Manual
Manual
PUT OIL IN ENGINE BEFORE
STARTING.
510153
Push foward for faster
speed, Pull back for
slower speed
SPEED
3
2
DISCONNECT SPARK PLUG
WIRE BEFORE ASSEMBLING
UNIT.
Check
Warranty
Card
400972
1
Warranty
Card
Your Billy Goat High Wheel Mower is
shipped from the factory in one carton,
completely assembled.
14
INSTRUCTION LABELS
These labels should be included on your Contour mower. If any of these labels are damaged, replace them before putting this
equipment into operation. Item and part numbers are given to help in ordering replacement labels..
WARNING
WARNING
PATENT
EXPLOSIVE FUEL
DRIVE
BLADE
STOP ENGINE AND ALLOW TO
COOL BEFORE REFUELING.
OIL CHAIN
EVERY 10 HOURS
PENDING
PART NO. 500183
Label Patent Pending
Item 98 Part No.500183
Label Do Not Fill While Engine Is Hot
Item 48 Part No.400268
Label Warning Guards
Item 63 Part No.900327
Label Drive/Blade
Item 101 PartNo.510174
Label Oil Chain
Item 62 PartNo.830502
Make sure both
sides are set to
same height
2 in.
3 in.
4 in.
2.5 in.
3.5 in.
WARNING
TO PREVENT INJURY
Do not operate unless deflector is in place
Label Cutting Hgt.
Item No. 58 Part No. 510147
Label Warning Mower
Item No. 60 Part No. 510206
Label Read Owner's Manual
Item 109 PartNo.890301
Label Danger Keep Hands
and Feet Away
Item 61 PartNo.400424
WARNING
DANGER
AVOID SERIOUS INJURY OR DEATH.
OBJECT THROWN BY BLADE
CAN CAUSE SERIOUS INJURY.
Follow all instructions in Owner's Manual.
Go across slopes, not up and down.
Do not mow when children or others are around.
Look down and behind before and while moving
backwards.
Inspect area and remove debris before
mowing.
Keep children and others away.
Wear eye protection.
Do not operate unless guard is in place.
Keep safety guards, shields, switches, and etc.
in place and working.
Label Ear Eye Breathing
Item No. 110 Part No. 890254
Label Danger Flying Material
Item No. 111 Part No. 810736
Label Mower Instruction Item No. 59 Part No. 510207
15
ENGINE LABELS
Read Owner’s Manual Before Operating.
Lire le manuel d’utilisation avant la mise en route.
Vor Inbetriebnahme Bedienungs - und Wartungsanleitung lesen.
Favor leer las instrucciones de operacion antes de operar el motor.
Consultare il Manuale Uso e Manutenzione prima dell utilizzo.
Las Skotselinstruktionen Innan Start.
Briggs & Stratton
Page 4 of 12
Part No. 510153
.. ..
Form No. F102802D
16
OPERATION
INTENDED USE: This unit is mainly designed for cutting
grass. Some overgrown weeds, and taller grass may also
be cut. Be sure to inspect work area and machine before
operating. Make sure that all operators of this equipment
are trained in general machine use and safety.
16.2
CUTTING OPERATION
CAUTION: The mower blade will be rotating when-
ever engine is running.
Like all mechanical tools, reasonable care must be
used when operating machine. Do not operate unit
in areas where bystanders may be present.
CAUTION: Stop Blade when crossing gravel drives,
walks or roads and under all conditions where thrown
objects might be a hazard.
Do not operate if excessive vibration occurs.
If excessive vibration occurs, shut engine off
immediately and check for damaged or worn blade, loose
blade jam nut, loose engine or lodged foreign objects.
Note: See maintenance section for proper blade jam nut
torque specifications.
CLEARING A CLOGGED CUTTING DECK: Turn
engine off and wait for blade to stop completely.
Disconnect spark plug wire.
Wearing durable gloves, remove clog.
Danger, the clog may contain sharp materials.
Reconnect spark plug wire.
16.1
STARTING
CAUTION: Use extreme care when operating
the blade. Inspect the work area for foriegn
objects that could cause damage to the unit
or injure the operator if struck by the blade.
Never operate the blade with bystanders in
the work area.
PUT OIL IN ENGINE BEFORE
STARTING.
ENGINE: See engine manufacturer’s instructions
for type and amount of oil and gasoline used.
Engine must be level when checking and filling
oil and gasoline.
16.3
CUTTING HEIGHT ADJUSTMENT
ENGINE SPEED: Set at factory. The engine runs at a
constant speed.
CAUTION: DO NOT make cutting height
adjustment when engine is running.
FUEL VALVE: Move fuel valve to "ON" position (when
provided on engine).
Cutting height can be adjusted from 2" to 4" by 1/2" incre-
ments by lowering or rasing the deck. For easiest adjustment
change the height from one side at a time. To change
cutting height, remove lock pins, raise or lower deck to
desired height, then reinsert lock pins. Repeat this step
on other side
1. Select desired cutting height before starting engine.
2. Place mower on a sidewalk or driveway where the
mower blade is in an unloaded condition. If it must be
started on the lawn, move mower over previously cut
grass.
3. Be sure drive bail is not engaged.
NOTE: Be sure that the deck is level. Running the deck
out of level will result in poor cut quality and increased belt
wear.
4. Prime to choke.Prime is located in front of the engine.
5. Pull back on operator presence control, then pull back
on starter rope slowly until resistance is felt. Then pull
cord rapidly to start. Repeat if necessary.
Fig. 1
Page 5 of 12
Part No. 510153
Form No. F102802D
|