Manufactured by Hayter Limited
Hovertrim
OWNER'S HANDBOOK
MODELS:
184E XR44 Hovertrim
185E XR16 Hovertrim
(English Version)
ISSUE 28.01.08
PART NUMBER: 111-1519 (A)
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
SPECIFICATIONS
MAIN
Main Features
1.
2.
3.
4.
5.
6.
7.
8.
9.
Footstop
Air Cleaner
Serial No. Label
Choke Lever
Spark Plug / Lead
Exhaust Guard
Handlebar Securing Knob
Handlebar
Engine Stop Lever
8
9
10
11
10. OPC Switch
11. Oil Dipstick
12. Engine Cover
13. Engine Start Grip
14. Fuel Cap Vent Knob
15. Fuel Cap
12
13
7
14
15
6
5
16. Fuel Valve Lever
16
HAY-G00108-A
4
1
3
2
Specifications
Code
184E
185E
Model
XR44
XR16
Honda
GXV57
Engine
Honda
Engine type
Fuel type
GXV57
Unleaded petrol
0.271 litres
SAE 13/30
0.251 litres
40 cm (16”)
12.5 kg
Unleaded petrol
0.271 litres
SAE 13/30
0.251 litres
40 cm (16”)
12.5 kg
Fuel capacity
Engine Oil type
Oil sump capacity
Cutting width
Dry Weight
RPM
4800
4800
1.3
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
1.3 Main Features / Specifications
1.5 Contents
1.21
Declaration of Conformity
1.22 - 1.23 Trouble Shooting
1.24 - 1.25 Parts List
1.6 Introduction
1.24
1.25
- Mainframe Parts List
- Exploaded View - Mainframe
1.7 Warranty
1.26 Notes
1.8 - 1.11 Safety Precautions
1.8
1.8 - 1.9
1.9 - 1.10
1.10 - 1.11
1.11
- Training
- Preparation
- Operation
- Maintenance and Storage
- Safety Symbols
- Decal Symbols
1.27 Customer Info
1.11
1.12 Assembling the Mower
1.12
1.12
- Delivery Checklist
- Assembling
1.13
1.13
1.13
1.13
1.13
Before Starting the Mower
- Prevent Engine Damage
- Oil Type
- Check Oil Level
- Fuel Type
1.14 - 1.19 Operating The Mower
1.14
1.14 - 1.15
1.15
- Controls
- Starting
- Cutting Grass
- Stopping
- Adjusting the Cutting Height
- Flexiblade Replacement
- Before Mowing
1.15
1.16
1.16
1.16
1.17 - 1.21 Mower Maintenance
1.17
1.17
1.18
1.18
1.19
1.19
- Engine
- Carburettor Adjustments
- Air Cleaner Service
- Spark Plug Service
- Keeping Engine Clean
- Deck Housing
1.19
1.19 - 1.20
1.20
- Securing Nuts and Bolts
- Oil Service
- Storage
1.5
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Thank you for purchasing an Allen machine. The following pages are designed to help you
gain safe and efficient service from your machine.
IMPORTANT: This ‘Owners Handbook’ should be regarded as part of the mower as it gives
essential information regarding mower safety, operation, maintenance and specifications. Read
and understand this handbook prior to operating your machine for the first time. Make sure you
are familiar with all the controls and points of regular maintenance. If you have any doubts,
consult your local authorised dealer who will be pleased to give you assistance.
IMPORTANT: This machine is designed solely for cutting grass and other low lying ground
vegetation within the limitations stated in this manual. Use in any other way is considered as
contrary to the intended use. Compliance with and strict adherence to the conditions of opera-
tion, service and repair as specified in this handbook also constitute essential elements of the
intended use.
This machine should be operated, serviced and repaired only by persons who are familiar with
its particular characteristics and who are acquainted with the relevant safety procedures.
The safety precautions listed in this handbook and all other generally recognised regulations on
safety must be observed at all times.
Any arbitrary modifications carried out to this machine may relieve the manufacturer of
liability for any resulting damage or injury.
Allen machines are robustly constructed and designed for efficient economical
performance under normal mowing conditions. Correct operation and maintenance will ensure
a long and satisfactory service life. Prior to despatch from our factory every effort is made to
ensure that your mower is delivered in perfect condition.
Throughout this handbook all references to left and right are as viewed from behind the han-
dlebar, in the direction of forward travel.
This handbook is based on information available at the time of publication.
We reserve the right to amend product specifications without prior notification.
1.6
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY
LIMITED WARRANTY
Allen mower’s are manufactured by Hayter Limited.
The manufacturer warrants to the original user/purchaser that this unit shall be free from defects in
material and workmanship under normal use and service for a period of one year from the date of
purchase. The manufacturers of the engine furnish their own warranty and services are provided
through their authorised network (Refer to "Engine Warranty Statement"). To qualify for the full
benefit of the warranty, the Warranty Registration Card must be returned within 14 days of pur-
chase. If the selling dealer has not returned the Warranty Registration Card please complete and
return. Subject to the conditions and exclusions noted in this limited warranty, we shall at our
option, repair or replace any warranted part during the applicable period. If you are in doubt or
experience any difficulty, please consult an Authorised Service Dealer for clarification.
A 90 day warranty period applies to those items which are subject to normal wear and tear e.g.
wheels, cutterbars, flexiblades, cables and other consumable wearing parts.
This warranty does not apply to any unit that has been tampered with, altered, misused, abused or
used for hire, and will become invalid if non genuine parts are fitted. This warranty does not cover
for minor mechanical adjustments unless they are due to defective material or workmanship.
Consult the Owner's Handbook or an Authorised Service Dealer for assistance when making these
adjustments.
To make a warranty claim, return the unit to an Authorised Service Dealer along with proof of pur-
chase stating the machine serial number and date of purchase. Subject to the conditions and exclu-
sions in this limited warranty, the authorised dealer will, at our option, repair or replace any war-
ranted part within the duration of the warranty period.
This limited warranty gives you specific legal rights and is in addition to any statutory rights to
which you may be entitled and your statutory rights are not affected by this warranty. If you need
additional information concerning this written warranty, or assistance in obtaining services, please
write to : HAYTER LIMITED, Service Department, Spellbrook, Bishop's Stortford,
Hertfordshire CM23 4BU
UK ONLY: Details of your local authorised dealer are contained in Yellow Pages and the Hayter
1.7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Safety Alert Symbol
This safety alert symbol indicates important safety messages. When
you see this symbol be alert to the possibility of injury. Carefully read
the following and inform others.
Your machine is perfectly safe if used correctly. Failure to observe the
following precautions may result in serious injury.
Training
Before using the machine read the owners handbook carefully. Pay
particular attention to the safety precautions. Ensure that you are
familiar with the controls and the proper use of the equipment. Learn
how to stop the machine quickly in an emergency.
Never allow children or people unfamiliar with these instructions to
use the machine.
Never operate while people, especially children, or pets are nearby.
Keep in mind that the user is responsible for accidents or hazards
occurring to other people or their property.
Preparation
While using the machine, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or wearing san-
dals.
Thoroughly inspect the area where the machine is to be used and
remove all objects which may be thrown by the machine.
WARNING: Petrol is highly flammable.
- Store fuel in containers specifically designed for this purpose.
- Before starting the engine add fuel outdoors only. Never remove the
cap from the fuel tank or add petrol while the engine is running or
when the engine is hot. Allow the engine to cool for at least two min-
utes before refuelling. Do not smoke while refueling.
- Do not attempt to start the engine if petrol is spilled or a smell of
petrol is present. Move the machine away from the area of spillage
and avoid creating any source of ignition until petrol vapours have
dissipated.
- Replace faulty silencers.
1.8
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Preparation
- Always use fresh fuel. Stale fuel can block the carburettor and cause
leakage.
- Replace fuel tank and oil tank caps securely.
A damaged cutter device or impeller or both must be replaced. Before
use, always visually inspect the cutting mechanism to ensure that it is
in good condition. Do not operate the machine with an out of balance
cutting device or impeller.
-
Check all nuts and bolts and tighten when necessary.
Operation
Do not operate the engine in a confined space where exhaust fumes
(carbon monoxide) can collect. Refuel outdoors only and do not smoke
while refuelling.
Always pull the starter cord slowly until resistance is felt. Then pull
the cord rapidly to avoid kickback and prevent hand or arm injury.
Operate only in daylight or good artificial light.
Avoid using the machine on wet grass, where feasible.
Always be sure of your footing on slopes.
Walk, never run.
Operate across the face of slopes, never up and down.
Exercise extreme caution when changing direction on slopes.
Do not use on excessively steep slopes.
Use extreme caution when pulling the machine towards you.
Stop the engine before moving the machine across areas other than
grass.
Do not change the engine governor settings or overspeed the engine.
Start the engine carefully, with feet well away from the cutting device.
1.9
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Operation
Do not put hands or feet near or under rotating parts.
Never pick up or carry the machine while the engine is running.
Never touch the exhaust/exhaust guard or cooling fins when the engine
is hot.
Stop the engine and disconnect the spark plug lead:
- Before clearing blockages.
- Before cleaning/checking or working on the machine.
- After striking a foreign object. Inspect the machine for damage
and ensure necessary repairs are made before re-starting.
- If the machine starts to vibrate abnormally (check immediately).
(An out of balance cutting device causes severe vibration).
Stop the engine:
- Whenever you leave the machine.
- Before refuelling.
Maintenance & Storage
Keep all nuts, bolts and screws tight to ensure that the equipment is in
safe operating condition.
Frequently check fuel lines and fittings for cracks or leaks and replace
if necessary.
Never check for a spark when the spark plug is removed. (Use approved
tester)
Inspect the exhaust periodically and replace if worn or leaking.
Never crank the engine with the spark plug removed.
Never start the engine with the air-cleaner or air-cleaner cover
removed.
Never store the machine with petrol in the tank within an enclosed area
where fumes may reach an open flame or spark.
Allow the engine to cool before storing in any enclosure. To reduce the
fire hazard, keep the engine and the surrounding deck area free of
grass, leaves, or excessive grease.
1.10
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Maintenance & Storage
If the fuel tank has to be drained, this should be done outdoors and
when the engine is cool.
Wear strong work gloves when removing and reassembling the cutting
device.
Always replace worn or faulty parts with genuine Allen parts.
Safety Symbols
Danger of being hit by
thrown objects.
Danger of severing toes or
fingers in cutting mechanism.
Safety Alert - Be aware to the
possibility of injury.
Carefully read the Owners
Handbook before using the
machine.
Stop engine and remove
spark plug lead before
working on the mower.
Keep bystanders at a safe
distance from the mower.
Never fit metal
cutting parts.
Hearing protection
should be worn.
Information Symbols
Engine Stop
STOP
1.11
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING THE MOWER
Delivery Checklist
1
Remove the machine from the packaging and check that the following
items have been supplied correctly. If any items are missing contact,
your local dealer. Main deck, lower and upper handlebars.
2
3
1. Handlebar bolt x 2
2. Bush x 4
3. Nut x 2
5. Spanner x 1*
6. Ties x 2*
7. Ties*
9. Handwheel x 2*
4
HAY-G00116-A
4. Washer x 4
8. U Bolt x 2*
*Items 5 - 9 Not Illustrated
Assembling
Step 1 Lower Handlebar
2
2
Fit the lower handle first, and position the white bushes (2) as shown
on both sides. Place the lower handle between bushes with the kick
stop assembley on the right hand side. Attach the lower handle using
the fixings supplied.
3
4
1
4
DTP-000-003-A
Step 2 Upper Handlebar
Assemble the upper handle align holes and fit U-bolts and hand/wheel.
9
8
HAY-G00117-A
1.12
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE STARTING THE MOWER
Prevent Engine Damage
To prevent engine damage the engine is shipped without oil
or petrol. The engine must be filled with the correct grade
of oil and petrol before starting.
Oil Type
FILLER CAP/DIPSTICK
Always use high quality detergent oil classified SAE 10W-30.
Never use additives with recommended oil.
To prolong the life of your engine it is important that the oil is
changed after the first 5 hours of use - refer to ‘Maintenance
Schedule’.
MAX
MIN
HAY-G00118-A
Check Oil Level
Clean around the oil filter cap before removing. With the
mower on a level surface. Remove the oil filler cap and wipe
0.15
Litres
the dipstick with a clean cloth. Insert the dipstick into the oil
filler neck, but do not screw it in, then remove to check the oil
level.
HAY-G00119-A
The oil level is correct when it is at the full mark on the
dipstick.
DO NOT OVERFILL.
Fuel Type
FUEL FILLER CAP
Always use clean, fresh unleaded petrol. Purchase fuel in
quantities that can be used within 30 days. Never mix oil
with petrol.
FUEL LEVEL MARK
HAY-G00120-A
Fill to base of neck to allow for fuel expansion. Do not
overfill the fuel tank.
MAXIMUM FUEL
LEVEL
1.13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Controls
Check that the engine stop lever moves freely and returns to it’s rest
position when released.
Starting - Step 1
FUEL CAP VENT
1. Open the fuel tank vent by turning the vent knob at least 2 or 3 turns
counterclockwise.
OPEN
OPEN
2. Turn the fuel valve lever to the ON position.
ON
FUEL VALVE LEVER
HAY-G00122-A
3. To start a cold engine, move the choke lever to the CLOSED
position.
CHOKE LEVER
To restart a warm engine, leave the choke lever in the OPEN position.
CLOSED
OPEN
HAY-G00123-A
1.14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Continued
Starting - Step 1
4. Hold the handlebar together with the engine stop lever, place your
foot on the deck and tilt the mower towards you.
This will take the load off the engine making it easier to start.
Pull the starter grip lightly until you feel resistance, then pull
briskly.
Return the starter grip gently.
Do not allow the starter grip to snap back against the engine.
Return it gently to prevent damage to the starter.
HAY-G00124-A
6. If the choke lever was moved to the CLOSED position to start the
engine, gradually move it to the OPEN position as the engine
warms up.
CHOKE LEVER
CLOSED
OPEN
HAY-G00125-A
Cutting Grass
Start at the outside border of the lawn and go round working towards
the centre. Always control the mower with both hands, keeping the
mower flat on the ground.
Stopping
Release the engine stop lever.
Emergency stop: Release the engine stop lever.
If the engine fails to stop, disconnect the spark plug lead.
STOP
CS146
1.15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING THE MOWER
Adjusting the Cutting Height
The cutting height of your mower has been set at the
highest position (1). If you prefer a lower cut follow
these instructions:
1 = HIGH
2 = MID
2
3 = LOW
a. Turn the petrol tap to the off position and where
fitted the vent screw.
b. Disconnect the spark plug lead.
c. Tilt the mower to its side. (Keeping the carburet
-tor uppermost).
2
d. Remove flexiblade from cutting disc.
e. There are 3 different cutting height settings.
Position one length of flexiblade into the desired
cutting height setting. Ensure that a second length
is positioned in the corresponding cutting height
on the opposite side of the cutting disc.
1
3
HAY-G00143-A
30513
If using spare reel of flexiblade, cut to the length of 200mm and fit as
above.
Flexiblade Replacement
Drain the fuel by running the engine until the fuel tank is empty and the
engine stops. Remove the spark plug lead and allow the engine to
cool. Turn the mower on its left hand side and ensure that the carburet-
tor is uppermost.
Wearing protective gloves remove flexiblade and replace with new.
Before Mowing
To prevent accidents, thoroughly inspect the area and remove all
objects which when contacted by the mower cutterbar could become
dangerous projectiles. Inspect the area for hidden obstructions which
when contacted by the cutterbar could risk health and safety or result
in damage to the mower. Remember the location of these obstructions
and ensure that you mow around them.
1.16
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
To prevent accidents stop the engine disconnect the spark plug
lead before attempting to carry out maintenance procedures on
the mower.
Engine
1. Spark Plug / Lead
2. Exhaust Guard
3. Exhaust
4. Oil filler Cap/ Dipstick
5. Finger Guard
6. Start Grip
6
7
8
5
9
4
10
7. Fuel Cap Vent Knob
8. Fuel Cap
9. Choke Lever
10. Air Cleaner
11. Carburettor
3
2
HAY-G00144-A
1
11
Carburettor Adjustments
Should only be made by an authorised Honda dealer. Under no
circumstances should the engine be adjusted to run at a speed in excess
of that shown on the Declaration of Conformity.
1.17
Download from Www.Somanuals.com. All Manuals Search And Download.
MOWER MAINTENANCE
Air Cleaner Service
To service the air cleaner remove the air cleaner
HAY-G00145-A
cover (1) by releasing two top catches (2) and
tilting away from body until lower tabs release.
Remove cartridge (3) and clean by tapping gently
on a flat surface. If very dirty or damaged replace.
AIR CLEANER BODY
FILTER ELEMENT
- Do not brush
- Do not use petroleum solvents.
- Do not oil the cartridge.
After servicing, install the cartridge in the cover.
Insert the tabs on the bottom of the cover into the
slots in the bottom of the base.Tilt the cover
upwards until the two catches (2) hold it in place.
AIR CLEANER COVER
UPPER TABS
LOWER TABS
Spark Plug Service
Use only an approved spark tester (1) to check for a spark as shown in
the diagram.
1
Replace the spark plug every 100 hours or every season, whichever
occurs first. A spark plug wrench is available from any authorised
Honda service dealer.
Check the spark plug gap with a feeler gauge and set at 0.7 - 0.8mm.
1.18
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Keeping Engine Clean
Remove all grass and debris from the engine including the
exhaust/exhaust guard, the air ways in the top cowl and the surround-
ing deck areas on a daily basis after use. Never spray the engine with
water during cleaning. Water can contaminate the fuel. Always clean
with a brush or compressed air.
Grass and debris may clog the engine’s air cooling system especially
after prolonged operation while cutting tall, dry grass. The internal cool-
ing fins and surfaces may require cleaning to prevent overheating and
engine damage. We recommend that this service be carried out by an
authorised dealer.
Deck Housing
Remove grass debris from the top and underside of the deck immedi-
ately after use.
Securing Nuts & Bolts
Regularly check that all securing nuts and bolts are tight. Replace
missing or damaged items immediately.
1CG480V36B
Oil Service
Check the oil level daily before starting the engine and ensure that the
correct oil level is maintained. Refer to-‘Before Starting the Mower’
for oil checking and filling instructions.
1.19
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
MOWER
Continued
Oil Service
Change the engine oil after the first 5 hours of operation and thereafter
according to the ‘Maintenance Schedule’:-
1. Drain fuel by running the engine until the fuel tank is empty.
2. Remove the spark plug lead.
3. Allow the engine to cool.
4. Drain the oil while the engine is warm.(Not hot)
5. Tip the machine over on to its side ensuring that the air cleaner is
uppermost.
6. Remove the oil filler dipstick and drain the oil into a suitable
container.
7. Refill with new oil of the recommended SAE viscosity grade.
(Refer to-‘Before Starting the Mower’)
Storage
During transport and storage ensure the fuel cap vent knob and fuel
line are closed.
Engines stored in excess of 30 days need to be protected with a fuel
additive or drained of fuel to prevent gum from forming in the fuel
system or on essential carburettor parts. To ensure your mower is
maintained in good working order it is important that the following
procedure is adopted. Refer to the engine handbook as necessary.
Drain fuel from the engine by operating the engine until it stops.
Disconnect the spark plug lead, turn off fuel valve lever.
Change the engine oil.
Remove the engine spark plug and pour 15ml of engine oil into the
engine cylinder and replace the spark plug. Do not exceed the stated
volume of oil as engine damage may occur on re-starting. Do not
replace the spark plug lead. Slowly pull the engine start - grip once
to crank the engine. This will distribute the oil and help prevent engine
corrosion.
Clean grass and debris from the engine cylinder, cylinder head cooling
fins, under top cowl, and around and behind exhaust/exhaust guard.
Lubricate the mower.
Treat metal parts with a water repellent anti-corrosion product.
Cover the mower with a protective sheet and store it in a dry,
ventilated area.
1.20
Download from Www.Somanuals.com. All Manuals Search And Download.
DECLARATION OF CONFORMITY
EC DECLARATION OF CONFORMITY
Manufacturer: HAYTER LIMITED,
Address:
Spellbrook, Bishop’s Stortford, Herts. CM23 4BU. ENGLAND
declare that the trimmer:
Model name:
Model No:
XR44
CODE 184E
40 cm
XR16
CODE 185E
40 cm
Cutting width:
Speed of rotation of the
cutting device:
4800 rpm
Honda
4800 rpm
4800 rpm
Honda
4800 rpm
Engine Manufacturer:
Speed of rotation of engine:
Complies with the provisions of Directive: 98/37/EC Essential Health & Safety Requirements. Relating to the Design &
Construction of Machinery and Safety Components, as amended and the regulations transposed into national law.
Also Directive 2004/108/EC Electromagnetic Compatibility, and regulations
Complies with harmonized standards: EN 14910, EN 55012, BS EN 61000-4-2, EN61000-4-3 & EN 50366.
NOISE INFORMATION
The noise levels measured in accordance with
European Standard EN 14910
98 dB(A)
87 dB(A)
98 dB(A)
87 dB(A)
Machine sound power level:
Sound level at operator’s ear:
Date: 28.01.08
Authorised Signatory:
Mr. S. A. Maryniak
Declaration done and technical
documentation kept at:
HAYTER LIMITED
Spellbrook, Bishop’s Stortford,
Herts. CM23 4BU ENGLAND
VIBRATION INFORMATION
The vibration level at the operator contact positions, measured in accordance with European Standard EN 14910:
CODE184E - 4.3ms-2 CODE185E - 4.3ms-2
1.21
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE
SHOOTING
PROBLEM
POSSIBLE FAULT
Engine stop lever released.
Incorrect oil level.
REMEDY
Engine will not turn over
Operate engine stop lever.
Check oil level.
Obstruction under deck.
Remove obstruction.
Engine smokes
Excess oil level.
Check oil level.
Air cleaner cartridge oil
soaked or blocked.
Service air cleaner.
Engine runs then stops
Engine will not start
Fuel starvation.
Fill fuel tank.
Fuel cap vent blocked.
Fuel tap closed.
Clean fuel cap vent.
Open fuel tap (if fitted).
Raise height of cut.
Fill fuel tank.
Engine under load.
Fuel starvation.
Engine cold.
Set throttle to ‘choke’ position.
Incorrect/contaminated fuel.
Drain fuel tank and fill with
correct fuel.
Spark plug lead disconnected.
Throttle setting incorrect.
Faulty spark plug.
Connect spark plug lead.
Set throttle to ‘start’ position.
Clean and adjust gap or replace.
Engine runs rough
Spark plug lead becoming
disconnected in use.
Connect spark plug lead.
Faulty spark plug.
Clean and adjust gap or replace.
Service air cleaner.
Air cleaner blocked.
Incorrect/contaminated fuel.
Drain tank and fill with correct fuel.
1.22
Download from Www.Somanuals.com. All Manuals Search And Download.
SHOOTING
TROUBLE
PROBLEM
POSSIBLE FAULT
Mounting bolts loose.
Cutter disc bolt loose.
Bent crankshaft.
REMEDY
Engine vibrates excessively
Tighten bolts
Tighten bolt
Consult your dealer
Damaged impeller or cutter disc Consult your dealer
Uneven cut
Flexiblade out of balance
Engine running slow
Impeller air vents blocked
Underdeck not clean
Cutter disc loose
Replace flexiblade
Consult your dealer
Check and unblock
Clean
Poor hovering
Tighten bolts
1.23
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINFRAME
PARTS
LIST
Item No.
Description
Part No.
Qty Item Note
1
2
3
4
ALLEN XR44 DECAL
ALLEN XR16 DECAL ONLY
WASHER 1/4*7/8*.08" THK
NUT M6 NYLOC 'T' TYPE
CABLE TIE
111-1516
111-1825
09263
09438
HY3966
1
1
2
3
5
3
1
3
4
1
1
1
2
1
1
1
1
2
1
1
1
4
8
8
1
1
1
2
1
1
1
1
1
1
1
2
3
3
1
2
1
1
1
2
2
1
NOT SHOWN
6
7
8
9
BOLT M6*45
09568
09765
09784
SCREW PLASTITE DIA 5*22 PAN POZI
SCREW SOC HD BUTTON M6*16
DECAL - SAFETY PETROL
OPC WIRE LOOM ASSEMBLY
LOGO ALLEN
BOLT M6X55 HEXBZP-TUF
ENGINE - HONDA GXV57
BELL MOUTH
111-0083
111-2054
H295128
H292309
111-1245
111-1299
111-1300
111-1302
H292276
H292254
111-1303
111-1381
111-1500
111-1501
111-1502
111-1503
111-1504
111-1515
H292026
H290239
111-1525
H290237
111-1773
111-1792
111-1797
111-1816
100.000.630
H192040
H192169
H192181
H192204
H192257
H295159
HI-RISE KIT 16"
341033
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
ENGINE PLATE
IMPELLER - MOULDED ASSEMBLY
GRIP - HANDLE BAR
HANDLE - LOWER
SUMP COVER
CUTTING DISC
ENGINE MTG SCREW M6X20 SFS
SCREW M5*45 PPD
NYLOC NUT M5 FLANGED
5X5X20 SQUARE ENDED DRIVE KEY
BOLT UNF 2,1/4" X 1/4 HEX HEAD
SPRING DISC 40mmOD 1/4"ID
M6 U BOLT BZP
BAIL ARM
SWITCH BOX RH
UPPER HANDLE
RETURN SPRING
P-CLIP 15.8*4.6 NATURAL
FLEXIBLADE LINE - 143MTRS
SWITCH BOX LH
WASHER M6 (SCHIEBEE)
R CLIP
NOT SHOWN
RETAINING PIN
FOOTSTOP
HANDWHEEL M6 FEMALE IN
DECK 16"
STOP DECAL
HI RISE KIT
FASTENER DRIVE 6.5
GUIDE CABLE
NOT SHOWN
NOT SHOWN
NOT SHOWN
NOT SHOWN
HY412008
111-2153
DECAL - MAN EYE / EAR PROTECTION
1.24
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINFRAME
PARTS LIST
32
13
1
2
19
17
30
8
23
12
28
41
15
29
21
14
4
10
7
34
31
27
9
35
27
39
40
11
22
18
6
36
38
24
37
16
33
4
3
36
37
26
25
20
1.25
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
1.26
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMER INFORMATION
Serial No:
Engine Type:- GXV57
Engine Type:- GXV57
Engine:- Honda
Engine:- Honda
Date of Sale:-
Your Local Dealer:-
1.27
Download from Www.Somanuals.com. All Manuals Search And Download.
YOUR HAYTER DEALER IS:
Manufactured by Hayter Limited
Hayter Limited
Spellbrook, Bishop’s Stortford, Herts, CM23 4BU, England.
Tel: +44 (0) 1279 723444 Fax: +44 (0) 1279 600338
e-mail: [email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|