Brinly Hardy Lawn Mower Accessory ST 151BH User Manual

O W N E R ’ S M A N U A L  
1 5 & 2 5 G A L L O N T O W - B E H I N D  
L A W N S P R A Y E R  
SPRAYER MODEL:  
S T - 1 5 1 B H  
S T - 2 5 1 B H  
Assembly  
Installation  
Operation  
Repair Parts  
Recommended for use with Riding  
Mowers, Lawn & Garden Tractors  
and ATV’s.  
For the latest product udates and setup tips:  
Important: This manual contains information for the safety  
Visit us on the web!  
of persons and property. Read it carefully before assembly  
and operation of the equipment!  
L-1914 Rev. B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY  
TO HELP PREVENT BODILY INJURY DUE TO LOSS OF  
TOWING SAFELY  
STABILITY OR CONTROL:  
Stopping distance increases with speed and weight of towed load.  
Travel slowly and allow extra time and distance to stop.  
• Do not exceed maximum towing capacity of towing vehi-  
cle listed in the vehicle operator's manual.  
Total towed weight must not exceed limits specified in towing vehi-  
cle operator's manual.  
• Do not exceed 5 mph.  
Excessive towed load can cause loss of traction and loss of control  
on slopes. Reduce towed weight when operating on slopes.  
• Do not tow this machine behind a motor vehicle such as a  
car or truck.  
Never allow children or others in or on towed equipment.  
• Do not tow this machine behind a ZTR (Zero Turn Radius)  
Mower.  
Use only approved hitches. Tow only with a machine that has a  
hitch designed for towing. Do not attach this machine except at the  
approved hitch point.  
SAFETY  
Follow the manufacturer's recommendations for weight limits for  
towed equipment and towing on slopes. Use counterweights or  
wheel weights as described in the towing vehicle operator's man-  
ual.  
Read the general safety operating precautions in your towing vehi-  
cle operator's manual for additional safety information.  
Operate Safely  
Do not turn sharply. Use additional caution when turning or operat-  
ing under adverse surface conditions. Use care when reversing. To  
avoid jack-knifing, do not allow towing vehicle wheels to contact  
drawbar.  
Use this machine for intended purpose only.  
This machine is intended for use in lawn care and home applica-  
tions. Do not tow behind a vehicle on a highway or in any high  
speed applications. Do not tow at speeds higher than maximum  
recommended towing speed.  
Do not shift to neutral and coast downhill.  
Protect Bystanders  
Towing speed should always be slow enough to maintain control.  
Travel slowly over rough ground.  
Keep bystanders away when you operate this machine  
Before you back look carefully behind for bystanders.  
Do not let children or an untrained person operate machine.  
Do not let anyone, especially children, ride on this machine or the  
towing vehicle. Riders are subject to injury such as being struck by  
foreign objects and being thrown off. Riders may also obstruct the  
operator's view, resulting in this machine being operated in an  
unsafe manner.  
Before you operate any feature of this machine, observe your sur-  
roundings and look for bystanders.  
Keep Riders Off Towed Attachment  
Keep riders off towed attachment.  
Check towing vehicle brake action before you operate. Adjust or  
service brakes as necessary.  
Riders on a towed attachment are subject to injury, such as being  
struck by objects and being thrown off the attachment during sud-  
den starts, stops and turns.  
Keep all parts in good condition and properly installed. Fix dam-  
aged parts immediately. Replace worn or broken parts. Replace all  
worn or damaged safety and instruction decals.  
Riders obstruct the operator's view, resulting in the attachment  
being used in an unsafe manner.  
Do not modify the machine or safety devices. Unauthorized modifi-  
cations to the towing vehicle or machine may impair its function  
and safety, and void the warranty.  
Keep riders off of hitch bracket.  
Keep Body Parts From Under Drawbar  
Keep all nuts, bolts and screws tight.  
Before disconnecting this machine from towing vehicle hitch plate:  
• Stop on level ground.  
Caution should always be exercised whenever working on or near  
batteries. Heavy gloves and eye protection show be worn when  
making connections to a battery.  
• Stop towing vehicle engine.  
• Lock towing vehicle park brake.  
• Block wheels of the machine.  
• Make sure body parts are not under drawbar.  
L-1914 Rev. B  
2.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS REFERENCE  
19  
27  
EXPLODED VIEW (Tank Assembly)  
26  
25  
28  
16  
21  
19  
30  
17  
27  
26  
4
25  
a
7
28  
9
8
11  
23 15  
18  
a
15  
11  
23  
12  
5
6
13  
24  
15  
2
b
11  
22  
29  
1
15  
14  
3
20  
ST-251  
b
10  
ST-151  
Tools Required for Assembly:  
32  
• 1/2” Wrench (2)  
• Pliers  
31  
• Tape Measure  
• Safety Glasses  
• Gloves  
3.  
L-1914 Rev. B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS REFERENCE  
PARTS LIST (Tank Assembly)  
REF  
NO.  
ST-151  
PART NO.  
ST-251  
PART NO.  
DESCRIPTION  
QTY.  
1.  
B-6026  
B-6028  
B-6511  
B-6027  
B-6030  
B-6031  
B-6046  
B-6513  
B-6512  
B-6400  
B-6054  
B-6598  
B-6597  
B-6033  
B-6047  
B-6035  
B-6034  
B-6088  
B-6043  
B-6020  
B-6045  
B-6578  
B-6055  
B-6056  
S-1148  
B-6040  
B-6041  
B-6042  
22M0606P  
22M0616P  
B-6583  
B-6584  
B-6025  
B-6028  
B-6511  
B-6027  
B-6030  
B-6031  
B-6046  
B-6513  
B-6512  
B-6400  
B-6054  
B-6598  
B-6597  
B-6033  
B-6047  
B-6035  
B-6034  
B-6087  
B-6043  
B-6020  
B-6045  
B-6578  
B-6055  
B-6056  
S-1148  
B-6040  
B-6041  
B-6042  
22M0606P  
22M0616P  
B-6583  
B-6584  
Sprayer Tank  
1
1
1
1
1
1
1
1
1
1
3
1
1
1
*5  
2
1
1
2
1
1
1
2
2
2
2
2
2
1
4
1
1
2.  
Tank Cap  
3.  
Clip, Wand Holder  
4.  
Pump, 2.0 GPM CE rated  
Wiring Harness w/switch  
Wiring Harness, Battery Connection  
Elbow 90 deg., 3/8 Inch MPT. x 3/8 Inch H.B.  
Nipple, Reducing, 3/8” MPT. x 3/4” MGHT  
Valve, Dual Ball Tee, F.M.P.T.  
Hand Wand (B-6583 - Tip only for service)  
Washer, Black Vinyl 1" OD x 3/4 Inch ID  
Adapter, 1/4 Inch M.P.T. x 3/8 Inch H.B.  
Strainer, 1/4 Inch, #40 mesh  
Hose, 3/8” ID x 12 ft.  
5.  
6.  
7.  
8.  
9.  
10.  
11.  
12.  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
23.  
24.  
25.  
26.  
27.  
28.  
29.  
30.  
31.  
32.  
Hose Clamp  
Hose, 3/8” ID x 22 Inch  
Hose, 3/8” ID x 30 Inch  
Hose, 3/8” ID x 12 or 17 Inch  
Nozzle Body, 90 deg, 3/8 Inch H.B.  
Caution Decal  
Hose Barb, 3/8 Inch to 3/8 Inch  
Drain Cap 3/8 Inch  
Hose Barb, Flat Seat, 3/8 inch H.B.  
Nut, Hose Swivel, 3/4 inch F.G.H.T.  
Tip, Sprayer 90°  
Strainer, Nozzle  
Jamb Nut, Nozzle Fitting  
Nut, Tip Fitting  
Screw, #10-24 x 3/8 Inch  
Screw, #10-24 x 1 Inch  
Tip, Hand Wand  
Nut, Hand Wand  
* Extra hose clamp included.  
L-1914 Rev. B  
4.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS REFERENCE  
EXPLODED VIEW (Trailer Assembly)  
40  
50  
52  
52  
41  
39  
45  
38  
49  
43  
45  
37  
45  
42  
43  
46  
45  
52  
47  
47  
45  
35  
46  
52  
47  
47  
44  
43  
36  
43  
33  
48  
49  
42  
47  
34  
51  
53  
45  
Tools Required for Assembly:  
• 1/2” Wrench (2)  
• Pliers  
• Tape Measure  
• Safety Glasses  
5.  
L-1914 Rev. B  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS REFERENCE  
PARTS LIST (Trailer Assembly)  
REF  
NO.  
ST-151  
PART NO.  
ST-251  
PART NO.  
DESCRIPTION  
QTY.  
33.  
34.  
35.  
36.  
37.  
38.  
39.  
40.  
41.  
42.  
43.  
44.  
45.  
46.  
47.  
48.  
49.  
50.  
51.  
52.  
53.  
B-3034-10  
B-6322F-10  
B-5922  
B-3034-10  
B-6322F-10  
B-5922  
Clevis  
1
1
Towbar  
Logo, Decal  
1
B-6322R-10  
B-5684-01  
S-1142  
B-6322R-10  
B-5684-01  
S-1142  
Base, Rear  
1
Axle  
1
Boom Support  
Boom Center Bar  
Boom Extension, RH  
Boom Extension, LH  
Wheel  
2
S-1141-10  
B-7761R-10  
B-7761L-10  
B-5692  
S-1141-10  
B-7761R-10  
B-7761L-10  
B-5692  
1
1
1
2
45M2121P  
B-3861  
45M2121P  
B-3861  
5/8” Flat Washer  
Hitch Pin, 1/2 x 2-1/2 Inch  
5/16” Whiz Lock Nut  
Axle Spacer  
4
1
B-4355  
B-4355  
12  
2
B-5691  
B-5691  
B-5695  
B-5695  
5/16” x 5/8” Hex Flange Bolt  
Hairpin, Cotter  
5/8” E-Ring  
10  
1
D-146P  
D-146P  
F-577  
F-577  
2
F-782  
F-782  
Knob  
2
R-1946  
R-1946  
Decal, Instruction  
Washer, Special  
Label, Serial Number  
1
R-618  
R-618  
4
L-1744-4  
L-1744-4  
1
L-1914 Rev. B  
6.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY  
Figure 1.  
INSTALL CLEVIS  
1a. Install Clevis (33) to the Tow-  
bar (34).  
47  
Hex Flange Bolt, 5/16” x 5/8”  
Qty. 2  
48  
1b. Install Hitch Pin (44) and  
secure with Hairpin Cotter. (48).  
Hairpin Cotter  
Qty. 1  
47  
34  
44  
33  
48  
44  
Hitch Pin  
Qty. 1  
45  
Whiz Lock Nut, 5/16”  
Qty. 2  
45  
29  
2
Figure 2.  
ATTACH WAND HOLDER CLIP  
3
29  
Screw, #10-24 x 3/8”  
Qty. 1  
2a. Remove the Tank Cap (2).  
2b. Attach the Wand Holder Clip  
(3) to the Sprayer Tank (1) using  
the #10-14 x 3/8 inch screw (29),  
as shown.  
1
4
2c. Attach the mesh Strainer (13)  
by reaching into the tank (1) and  
screwing the strainer to the 1/4  
inch adapter (12) on the end of  
the suction hose (18).  
18  
12  
Note:The suction hose (18) is  
already attached to the  
pump.  
13  
7.  
L-1914 Rev. B  
Download from Www.Somanuals.com. All Manuals Search And Download.