Stiga Lawn Mower 125 COMBI PRO User Manual

STIGA PARK

125 COMBI PRO

8211-3060-01

Download from Www.Somanuals.com. All Manuals Search And Download.

SVENS₁K₀A

24 Nm

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

side of the machine (fig. 4).

6. Set the maximum cutting height.

SYMBOLS

The following symbols appear on the machine.

They are there to remind you of the care and atten-

tion required in use.

7. Force the V-belt onto the machine’s centre pul-

ley A (fig. 5).

This is what the symbols mean:

8. Lift the rear edge of the cutting deck and secure

with the pins (fig. 2). The basic setting for ma-

chines with 17“ tyres is position 3.

Warning!

Read the instruction manual and the safety

manual before using the machine.

9. Tension the belt with the belt idler B. The belt

idler should be on the left side of the belt viewed

from the driver’s position (fig. 5).

Warning!

Do not insert your hands or feet under the

cover when the machine is in operation.

10. Secure the lift spring’s snap hook in the imple-

ment lifter (fig. 6). The position of the snap hook

can be varied by threading it into different links in

order to achieve better lifting height or to follow

the ground better.

Warning!

Watch out for discarded objects. Keep on-

lookers away.

11. Secure the S-hook to one of the inner holes on

the implement lifter.

Warning!

Before starting repair work, remove the

spark plug cable from the spark plug.

SETTING

In order for the deck to cut evenly and attractively,

it has to be correctly adjusted:

Warning!

1. Make sure the air pressure in the tyres is correct:

Front: 0.6 bar (9 psi).

Rear: 0.4 bar (6 psi).

To minimise the risk of tipping

over, frame weights should be in-

stalled on the machine when using

the cutting deck.

2. Place the machine on a level floor. Undo the

pins (fig. 2).

INTRODUCTION

3. Adjust the deck so that the front and rear edge of

the cover are the same height above the floor.

The cutting deck is available as standard in two

versions:

4. Secure with the pins.

with mechanical setting of the cutting height

(item no. 13-2936).

with factory-fitted, electrical setting of the cut-

USING THE MACHINE

COMBI

ting height (item no. 13-2937).

Your new cutting deck combines two different

functions in the same product:

ASSEMBLY

1. “MULTICLIP”

CUTTING DECK

The machine comes equipped with a plug installed

in the ejector opening (fig. 7). The cutting deck can

be used for “Multiclip” i.e. the blade finely cuts up

the grass during mowing. The grass then falls into

the lawn where it is allowed to rot. This provides

the lawn with nourishment.

1. Install the deck mounts on the machine’s steer-

ing knuckles (fig. 1).

2. Place the cutting deck in front of the machine.

3. Remove the pins (fig. 2).

4. Screw the cutting deck into the deck mounts

(fig. 3).

To remove the plug, the cutting deck must first be

folded up into the service position (see heading

SERVICE POSITION). Then unscrew the plug.

5. 13-2937:

Connect the electrical contact to the socket on the

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

2. REAR EJECTION

upwards and hook the S-hook into the loop on the

cutting deck (fig. 8).

Use the machine without the plug. The grass is re-

leased in a line behind the cutting deck without be-

ing mulched.

If the grass has dried solid, scrape clean the under-

side.

CUTTING HEIGHT

If necessary, touch up the underside with paint to

prevent corrosion.

The cutting height can be varied from 25 to 90 mm.

item no. 13-2936 has a number of fixed posi-

tions for the cutting height.

item no. 13-2937 has continuously-variable set-

MAINTENANCE TIPS

In order to install/remove the Multiclip plug and to

facilitate maintenance, the cutting deck can be

folded up into the service position.

ting of the cutting height.

Note: Stated cutting heights apply when the ma-

chine is on a firm surface.

SERVICE POSITION

1.Set the maximum cutting height.

2. Undo both pins (fig. 2).

CUTTING TIPS

For optimum “Multiclip effect”, follow these tips:

3. Hook the belt idler arm on the mount (fig. 7)

4. Force the belt off the centre pulley (fig. 7).

cut frequently.

run the engine at full revs.

keep the underside of the cutting deck clean.

use sharp blades.

do not cut wet grass.

cut twice (with different cutting heights) if the

5. 13-2937:

Disconnect the electrical contact for the cutting

height setting.

grass is long.

6. Grip the deck’s frame.

7. Fold up the deck until it is upright on the rear

support plates (fig. 10).

MAINTENANCE

BLADES

PREPARATIONS

Use protective gloves when changing

blades to avoid cutting yourself.

Unless otherwise stated, all service and mainte-

nance must be carried out on a stationary machine

when the engine is not running.

Ensure that the blades are always sharp. This pro-

duces the best cutting results.

Prevent the machine from rolling by al-

ways applying the parking brake.

Always check the blades after a collision. If the

blade system has been damaged, defective parts

should be replaced.

Prevent unintentional starting of the

engine by disengaging the drive, shut-

ting off the engine and disconnecting

the spark plug cable or removing the

starter key.

Always use genuine spare parts. Non-

genuine spare parts can entail a risk of

injury, even if they fit the machine.

CLEANING

Install the blade so that the stamped logo is facing

down, towards the grass. Tighten the screws prop-

erly (fig. 11). Tightening torque: 24 Nm.

After each use, the underside of the cutting deck

should be rinsed off. This is carried out most easily

with the machine in the washing position.

PIVOT WHEELS

WASHING POSITION

The pivot wheels are equipped with grease nipples

on the pivot axle and the wheel axle. These must be

lubricated after every 50 hours of operation.

1. Set the lowest cutting height.

2. Undo both pins (fig. 2).

3. Grip the deck’s frame.

4. Fold up the deck so that it is pointing diagonally

Download from Www.Somanuals.com. All Manuals Search And Download.

ENGLISH

WEAR PROTECTION

There are two wear protection devices on the un-

derside of the cutting deck to protect it. These can

be replaced if necessary.

SPARE PARTS

STIGA genuine spare parts and accessories are de-

signed specifically for STIGA machines. Please

note that “non-original” spare parts and accesso-

ries have not been checked or approved by STIGA:

The use of such parts and accessories

can affect the function and safety of the

machine. STIGA accepts no responsi-

bility for damage or injuries caused by

such products.

GGP reserves the right to make alterations to the prod-

uct without prior notification.

Download from Www.Somanuals.com. All Manuals Search And Download.

EG-försäkran om överensstämmelse

EY-vaatimustenmukaisuusvakuutus

EU-overensstemmelseserklæring

EU-forsikring om overensstemmelse

EG-Konformitätsbescheinigung

EC conformity declaration

Declaração de conformidade da CE

Deklaracja zgodności EC

Декларация EC о соответствии

Deklarace shody s EU

EK megfelelőségi nyilatkozat

Izjava ES o skladnosti

Déclaration de conformité CE

EU-gelijkvormigheidsverklaring

Dichiarazione di conformità CE

Declaración de conformidad CE

1.Kategori

Luokka

Kategori

Gräsklippare med bensinmotor

Bensiinimoottorikäyttöinen ruohonleikkuri

Plæneklipper med benzinmotor

Gressklipper med bensinmotor

Rasenmäher mit Benzinmotor

Lawnmowers with petrol engines

Tondeuses à moteur à explosion

Grasmaaiers met benzinemotor

Tosaerba con motori a benzina

8.Fabrikat

Valmiste

Fabrikat

Make

Marque

Fabricage

Marca

STIGA

Торговая

марка

Značka

Kategori

Gyártmány

Znamka

Kategorie

Category

Catégorie

Categorie

Categoria

Categoría

Categoria

Kategoria

Категория

Kategorie

Kategória

Kategorija

Rasenmäher mit Dieselmotor

Lawnmowers with diesel engines

Tondeuses à moteur à explosion

Grasmaaiers met dieselemotor

Tosaerba con motori a diesel

Marka

9.Klippbredd

Leikkuuleveys

Klippebredde

Schnittbreite

Cutting width

Largeur de coupe

Snijwijdte

Ancho de corte

2. 125 cm

Largura de corte

Szerokość koszenia

Рабочий захват

Šířka sekání

Vágási szélesség

Širina košnje

Cortacéspedes con motor de diesel

Máquinas de cortar relva com motores a diesel

Kosiarki do trawy z silnikiem napedowy

Газонокосилки с бензиновым двигателем

Sekačky trávy s nádrž motorem

Dízelmotoros fűnyíró

Kosilnice z dizelsko motorji

Larghezza di taglio

10.Serienr

Valmistenumero

Serienr.

Se dekal på chassit

Katso tarra rungossa

Se mærkat på chassis

Se etikett på chassiset

Siehe Schild am Chassis

See label on chassis

2.Typ

Tyyppi

Type

Typ

Type

Tipo

Typ

P901

Тип

Typ

Típus

Tip

Seriennummer

Serial number

Numéro de série

Serienummer

Numero di serie

Número de serie

Número de série

Numer seryjny

Заводской номер

Číslo série

Type

Voir la plaque sur le châssis

Zie label op chassis

3.Art.nr.

Tuotenumero

Art.nr.

Art.-Nr.

Item no

N° d'article

Itemnr.

Articolo n.

Nº de

referencia

Item nº

Pozycja nr

Поз.

Císlo položky

1. 13-6231 + 13-2936

2. 13-6231 + 13-2937

Tételszám

Izdelek, št.

Vedi etichetta sul telaio

Véase la etiqueta en el chasis

Ver etiqueta no chassis

Patrz etykieta na podwoziu

См. табличку на шасси

Viz štítek na podvozku

Lásd az alvázon lévő adattáblát!

Glej nalepko na šasiji

Sorozatszám

Serijska številka

4.Tillverkare

Valmistaja

Producent

Produsent

Hersteller

Fabricant

Fabrikant

Produttore

Fabricante

Producent

GGP Sweden AB

P.O. Box 1006

SE-573 28 Tranås

Sweden

Изготовитель

Výrobce

Gyártó

Proizvajalec

11.Motor / Moottori / Motor / Motor / Motor / Engine / Moteur / Motor /

Motore / Motor / Motor / Silnik / Двигатель / Motor / Motor / Motor

Manufacturer

Fabrikat

Valmiste

Fabrikat

Make

Marque

Fabricage

Marca

Hatz

Марка

Značka

5.Vibration

Tärinä

Vibração

Wibracje

Вибрация

Vibrace

Vibráció

Tresljaji

< 0.5 m/s

Gyártmány

Znamka

Vibration

Vibrasjon

Vibration

Vibratie

Marka

Modell

Malli

Model

Modell

Model

Modèle

Model

Modello

Modelo

Model

1B40W

Модель

Model

Modell

Model

< 2.5 m/s

Vibrazioni

Vibración

6A.Garanterad ljudeffektnivå

Taattu äänitehotaso

103 dB(A)

12.Rotationshastighet

Pyörimisnopeus

3400 rpm

Garanteret lydeffektniveau

Garantert lydeffektnivå

Garantierter Geräuschpegel

Guaranteed sound power level

Rotationshastighed

Rotasjonshastighet

Umdrehungsgeschwindigkeit

Rotation speed

Niveau de puissance acoustique garanti

Gegarandeerd geluidsniveau

Vitesse de rotation

Rotatiesnelheid

Livello di potenza sonora garantito

Nivel de potencia de sonido garantizado

Nível de ruído garantido

Nieprzekraczalny poziom hałasu

Гарантированный предельный уровень шума

Zaručená úroveň hluku

Velocità di rotazione

Régimen

Velocidade de rotação

Prędkość obrotów

Частота вращения

Rychlost otáčení

Rotációs sebesség

Hitrost vrtenja

Garantált hangteljesítményszint

Zajamčena raven zvočne jakosti

(LWA)

6B.Uppmätt ljudeffektnivå

Mitattu äänitehotaso

101 dB(A)

7.Anmält organ

Ilmoitettu laitos

ITS Testing &

Målt lydeffektniveau

Målt lydeffektnivå

Bemyndiget organ

Underrettet organ

Anmeldeorganisation

Notified body

Organisme notifié

Keuringsinstantie

Organismo notificato

Organismo notificado

Urząd zatwierdzający

Уполномоченная организация

Oprávnený orgán

Az értesítés címzettje

Obveščeni organ

Certification Ltd

Gemessener geräuschpegel

Measured sound power level

Niveau de puissance acoustique mesuré

Gemeten geluidsniveau

Livello di potenza sonora misurato

Nivel de potencia de sonido medido

Nível de potência sonora medido

Nieprzekraczalny poziom hałasu

Замеренный уровень шума

Naměřená úroveň hluku

Notified Body repre-

sentative 0359

Mért hangteljesítményszint

Izmerjena raven zvočne jakosti

Download from Www.Somanuals.com. All Manuals Search And Download.

EG-försäkran om överensstämmelse

EY-vaatimustenmukaisuusvakuutus

EU-overensstemmelseserklæring

EU-forsikring om overensstemmelse

EG-Konformitätsbescheinigung

EC conformity declaration

Declaração de conformidade da CE

Deklaracja zgodności EC

Декларация EC о соответствии

Deklarace shody s EU

EK megfelelőségi nyilatkozat

Izjava ES o skladnosti

Déclaration de conformité CE

EU-gelijkvormigheidsverklaring

Dichiarazione di conformità

Declaración de conformidad CE

Denna produkt är i överensstämmelse med

direktiv 89/336/EEG om elektromagnetisk kompatibilitet

maskindirektiv 98/37/EEG med särskilda hänvisningar till direktivets bilaga 1

om väsentliga hälso- och säkerhetskrav i samband med tillverkning

ljuddirektiv 2000/14/EG

Maskinen är utvecklad och tillverkad enligt följande standard:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

requisitos esenciales de seguridad y de salud relativos a la fabricación de las

máquinas

Directiva 2000/14/CE relativa a las emisiones sonoras

Referente a standards armonizados:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Tämä tuote täyttää seuraavien direktiivien vaatimukset

sähkömagneettista yhteensopivuutta koskeva direktiivi 89/336/ETY

konedirektiivi 98/37/ETY viitaten erityisesti direktiivin liitteeseen 1, joka

Este produto está em conformidade com

Directiva sobre Compatibilidade Electromagnética 89/336/CEE

Directiva relativa às Máquinas 98/37/CEE com referência especial ao

käsittelee olennaisia terveys- ja turvallisuusvaatimuksia valmistuksen

yhteydessä

apêndice 1 da directiva referente aos requisitos essenciais de saúde e

segurança em conjunto com os de fabrico.

meludirektiivi 2000/14/EG

Tuote on kehitetty ja valmistettu seuraavien normien mukaisesti:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Directiva sobre Emissão de Ruído 2000/14/CE

Referencias à normas harmonizadas:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Dette produkt er i overensstemmelse med

direktiv 89/336/EØF om elektromagnetisk kompatibilitet

direktiv 98/37/EØF om indbyrdes tilnærmelse af medlemsstaternes

Ten produkt odpowiada nastepujacym normom:

- Kompatybilnośc elektromagnetyczna - dyrektywa 89/336/EEC

- Maszyny - dyrektywa 98/37/EEC, a szczególnie dodatkiem 1 dyrektywy,

dotyczacym podstawowych wymogów w zakresie zdrowia i

bezpieczenstwa w zwiazku z produkcja

lovgivning om maskiner med særlig henvisning til direktivets bilag 1 om

væsentlige sikkerheds- og sundhedskrav i forbindelse med konstruktion og

fremstilling

direktiv 2000/14/EF om støjemission

Produktet er udviklet og fremstillet i overensstemmelse med følgende normer:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

- Emisja halasu - dyrektywa 2000/14/EC

W odniesieniu do norm harmonizujących:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Dette produktet er i overensstemmelse med

direktiv 89/336/EØF om elektromagnetisk kompatibilitet

maskindirektiv 98/37/EØF med særskilte henvisninger til direktivets bilag 1

Tento výrobek vyhovuje

- Smernici o elektromagnetické kompatibilite 89/336/EEC

- Smernici o strojních zarízeních 98/37/EEC se speciálním odkazem na

prílohu 1 uvedené smernice týkající se duležitých požadavku na ochranu

zdraví a bezpecnost v souvislosti s výrobou

om vesentlige helse- og sikkerhetskrav i forbindelse med produksjon

lyddirektiv 2000/14/EF

Produktet en utviklet og produsert i overensstemmelse med følgende normer:

--EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

- Smernici o emisích hluku 2000/14/EC

Použité harmonizované normy:

Dieses Produkt ist in Übereinstimmung mit

Direktive über wichtige Gesundheits- und Sicherheitsanforderungen im

Zusammenhang mit der Herstellung

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Direktive 89/336/EEG zur elektromagnetischen Kompatibilität

Maschinendirektive 98/37/EEG mit besonderem Hinweis auf Anlage 1 der

Ez a termék megfelel

- az elektromágneses kompatibilitásról szóló 89/336/EGK irányelvnek,

- a gépekről szóló 98/37/EGK irányelvnek, különös tekintettel az

irányelvnek a gyártással összefüggő, az alapvető egészségi és biztonsági

követelményekre vonatkozó 1. függelékére, és

Schallschutzdirektive 2000/14/EG

Das Erzeugnis ist in Übereinstimmung mit folgenden Normen entwickelt und

gefertig worden:

- a zajkibocsátásról szóló 2000/14/EK irányelvnek.

- a termék fejlesztése és gyártása a következő szabványokkal összhangban

történt:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

This product conforms to

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Electromagnetic Compatibility Directive 89/336/EEC

Machinery Directive 98/37/EEC with special reference to appendix 1 of the

Ta izdelek je v skladu z

directive regarding essential health and safety requirements in conjunction

with manufacturing

- Direktivo 89/336/EGS o elektromagnetni zdru_ljivosti

- Direktivo 98/37/EGS o strojih, s posebnim sklicevanjem na njen Dodatek

1 v zvezi z osnovnimi zdravstvenimi in varnostnimi zahtevami, skupaj s

proizvodnjo

Noise Emission Directive 2000/14/EC

This product has been developed and manufactured in conformance with the

following standards:

- Direktivo 2000/14/ES o emisijah hrupa

Hivatkozás a harmonizált szabványokra:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Ce produit est conforme à

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

La Directive compatibilité électromagnétique 89/336/EEC

La Directive machines 98/37/EEC, avec une référence particulière à

l'annexe 1 de la directive concernant les exigences essentielles en matière de

santé et de sécurité dans le cadre de la fabrication

La Directive émissions de bruit 2000/14/EC

Le produit en question a été mis au point et fabriqué conformément aux

normes suivantes:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Dit product voldoet aan

Richtlijn voor elektromagnetische compatibiliteit 89/336/EEC

Richtlijn voor machines 98/37/EEC met speciale verwijzing naar aanhangsel

1van de richtlijn voor essentiële gezondheids-en veiligheidsvereisten i.v.m.

fabricage

Richtlijn voor geluidsproductie 2000/14/EC

Het product is in overeenstemming met volgende normen ontwikkeld en

vervaardigd:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Questo prodotto è conforme alla

Direttiva sulla compatibilità elettromagnetica 89/336/EEC

Direttiva Macchine 98/37/EEC con particolare riferimento all'appendice 1

della direttiva riguardante i requisiti essenziali in materia di salute e sicurezza

relativi alla fabbricazione

Direttiva sulle emissioni sonore 2000/14/EC

Riferimento alle norme armonizzate:

EN 836, EN 292-2, EN 1033, EN ISO 3767, EN ISO 14982

Mats Antonsson

Certifieringsansvarig

Sertifioinnista vastaava

Certificeringsansvarlig

Sertifiseringsansvarlig

Für die Zertifizierung

verantwortlich

Certification Manager

Directeur de Certification

Certification Manager

Direttore Certificazione

Responsable de

Director de Certificação

Kierownik ds. legalizacji

Начальник службы

сертификации

Vedoucí pro certifikaci

a tanúsításért felelős

igazgató

Utfärdat i Tranås

Annettu Tranåsissa

Udfærdiget i Tranås

Utstedt i Tranås

Ausgefertigt in Tranås, Emitido en Tranås

Schweden Publicado em Tranås

Issued in Tranås

Fait à Tranås

Gepubliceerd in Tranås Vydáno v Tranåsu

Wydano w Tranås

Выдано в Tranås

2004-01-22

Poslovodja za izdajo

certifikatov

Rilasciata a Tranås

Kibocsátva Tranåsban

Izdano v Tranås

certificación

Download from Www.Somanuals.com. All Manuals Search And Download.

www.stiga.com

Box 1006 SE-573 28 TRANÅS

GGP Sweden AB

Download from Www.Somanuals.com. All Manuals Search And Download.

Bolens Lawn Mower 111 434R000 User Manual
Dixon Lawn Mower Accessory 966 004901 User Manual
HTC Lawn Mower Accessory 968 999732 User Manual
Poulan Lawn Mower 179419 User Manual
Rover Lawn Mower 300361 User Manual
Snapper Lawn Mower 1600331 page
Snapper Lawn Mower Finishing Mower User Manual
Snapper Lawn Mower LT125G38DB User Manual
Snapper Lawn Mower MR216017B User Manual
Weed Eater Lawn Mower SGT18H46C User Manual