Parts Manual for
TM
MID MOUNT Z-RIDER
ZERO TURNING HYDRO DRIVE
SERIES 0,1,2
POWER UNIT MODELS
ZM2200K
ZM2500KH
ZMT2500KH
MZM2200KH
MZM2300KH
ZM2501KH
MZM2301KH
ZM2502KH
MOWER UNIT MODELS
ZM5200M
ZM5201M
ZM5202M
ZM6100M
ZM6101M
ZM6102M
Model ZM2200K shown
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
(Rev. 6, 09/25/02)
MANUAL No. 06110
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE TIRE/WHEEL ASSEMBLY
1
ASSEMBLY
2, 2A, 2B
8, 8A
3, 3A
6
9
7
L. H. TRANSAXLE ASSEMBLY
(See Pages 8 thru 11)
4
5
ITEM PART NO.
DESCRIPTION
1
--
5-4526
5-7706
ASSEMBLY, Rear Tire & Rim (Includes Item 2, 3 & 4)
ASSEMBLY, Rear Tire & Rim (Left Hand)
(Model MZM2200KH Only) (Includes Item 2A, 3A & 4)
ASSEMBLY, Rear Tire & Rim (Right Hand)
(Model MZM2200KH Only) (Includes Item 2A, 3A & 4)
ASSEMBLY, Rear Tire & Rim (Includes Item 2B, 3 & 4)
(Model ZMT2500KH & ZM2501KH)
ASSEMBLY, Rear Tire & Rim (Includes Item 2C, 3 & 4)
(Model ZM2502KH)
--
--
--
5-7707
5-8193
5-9161
2
4-4771
4-4707
7-2110
7-4157
4-4772
4-7032
1-2234
2-7192
5-4461
9-1793
9-1778
9-1978
TIRE, 23 x 10.5 - 12 NHS
2A
2B
2C
3
3A
4
5
6
7
8
TIRE, 21 x 11 - 8 AG (Model MZM2200KH Only)
TIRE, 23 x 10.5 – 12 “Turf Mate”
TIRE, 23 x 10.5 – 12 “Super Turf”
RIM, 12” Diameter x 7.00”
RIM, 8” Diameter x 6-3/8 (Model MZM2200KH Only)
VALVE, Air
NUT, 1/2-20 Lug (5)
ASSEMBLY, Wheel Hub
PIN, 9/64 x 1-1/2” Cotter
KEY, #808 Woodruff
8A
KEY, #806 Woodruff
(Model ZMT2500KH, ZM2501KH, ZM2502KH)
NUT, 3/4-20 Slotted Hex
9
9-1828
MID MOUNT Z-RIDER
MANUAL No. 06110
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE SUB-ASSEMBLY
12A
24
13
23
26
11
12B
10A
10B
9A
9B
20
17
19
8
8
21B
22
21A
3
16
15
14A
14B
17
18
2
4
1
25
6
5
7
MANUAL No. 06110
MID MOUNT Z-RIDER
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE SUB-ASSEMBLY
ITEM
PART NO.
**
DESCRIPTION
1
--
--
2
3
4
5
6
7
8
ENGINE, 22HP (Kohler No. CH22S PS-66536)
ENGINE, 23HP (Kohler No. CH23S PS-76536)
ENGINE, 25HP (Kohler No. CH25S PS-68577)
J-CLIP, 3/8” Cushioned (2)
**
**
3-5638
9-1523
9-1299
9-1553
2-2486
2-7972
9-1838
SCREW, 5/16-18 x 5/8” Hex Washer Self Tap (2)
NUT, 3/8-16 Nyloc (4)
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5 (4)
OIL DRAIN, Short
ASSEMBLY, Oil Valve
SCREW, M6 x 1 x 6mm Hex Flange Cap (Qty. 2 for 22 HP;
Qty. 4 for 25 HP) (Kohler part no. M-0650012)
BRACKET, Muffler, 22HP Kohler
9A
9B
10A
10B
11
4-2708
4-6486
**
BRACKET, Muffler, 25HP Kohler (Series 0)
MUFFLER, 22HP Kohler (Kohler part no. A-24 068 00)
MUFFLER, 25HP Kohler (Kohler part no. A-24 068 17)
SCREW, M5 x 8 x 16mm Hex Head Self Tapping (2) (Kohler # M-0545016)
GUARD, Muffler
4-6488
9-1839
4-2707
7-2155
9-1840
3-5675
4-6410
3-5520
4-6409
9-1806
9-1301
9-1807
9-1962
9-1304
9-1808
3-5852
5-8207
4-6487
7-2256
9-2016
1-3250
4-6411
12A
12B
13
GUARD, Muffler (used on ZMT2500KH & ZM2501KH models)
SCREW, M5 x 8 x 10mm Hex Head Flange (2) (Kohler #M0550010)
SPACER, Clutch
14A
14B
15
SPACER, Clutch (Model MZM2200KH Only)
CLUTCH, Electric
--
CLUTCH, Electric (Model MZM2200KH Only)
SCREW, 7/16-20 x 1-1/2” Hex Head Cap. Grade 5
WASHER, 7/16” Split Lock (2)
16
17
18
WASHER, 7/16 I.D. x 1-3/8 O.D. x 1/4 Flat
WASHER,7/16” I.D.x 1-5/8” O.D. x 1/4 Flat
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5
SCREW, 7/16-14 x 1”, Grade 5
--
19
20
21A
21B
22
BRACKET, Anti-Rotation (5/16”)
BRACKET, Anti-Rotation (Model MZM2200KH Only)
SHIELD, Heat, 25HP Kohler
23
SPACER, Muffler Guard
24
SCREW, 1/4-20 x 1-1/2” Hex Washer Self-Tap (2)
KEY, 1/4 Square x 1”
25
26
BRACKET, Torque
NOTE: Items 2, 3 & 8 thru 13 are included with engine.
MID MOUNT Z-RIDER
MANUAL No. 06110
5
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL TANK ASSEMBLY
1
16
11
15
18
11
1
11
19
11
9
14
11
11
2A
3
4
17
7
13
11
5
5
3
8
7
12
10
1
4
5
19
6
20 & 21
20
18
18
2B
21
MANUAL No. 06110
MID MOUNT Z-RIDER
6
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL TANK ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
2-8903
5-4430
5-7705
CAP, 3-1/2” Fuel (2)
2A
2B
FUEL TANK, Main (Includes Item 1 - Fuel Cap)
FUEL TANK, Main (Includes Item 1 - Fuel Cap)
(MZM2200KH Models Only) (Includes Fuel Gauge)
3
2-6746
9-1508
2-3295
9-1523
9-1298
4-2886
5-4528
4-4701
2-9900
TRIM, 2 Inch (3)
4
BOLT, 5/16-18 x 3/4” Short Neck Carriage Grade 5 (2)
U-NUT, 1/4-20 Locking (4)
5
6
SCREW, 5/16-18 x 5/8” Hex Washer Self Tapping (2)
NUT, 5/16-18 Hex Nylon Insert (2)
7
8
BRACKET, Fuel Tank Support
9
FUEL TANK, Auxiliary (Includes Item 1 - Fuel Cap)
BRACKET, Mounting Auxiliary Fuel Tank
10
11
CLAMP, 7/16” Hose (8)
(4 used on MZMs; 8 used on ZMT2500KH;
8 used on ZM2501KH)
12
13
14
15
16
--
3-2956
4-4777
3-5853
4-4681
4-4797
4-5333
7-7345
5-4529
5-4530
4-7038
4-7112
HOSE, 1/4” I.D. x 10” Fuel
FILTER, 15 Micron Fuel (Included With Engine)
HOSE, 1/4” I.D. x 4” Fuel (2)
VALVE, 3-Way Fuel
HOSE, 1/4” I.D. x 45” Fuel
HOSE, 1/4” x 36” Fuel (MZM Models Only)
PAD, Foam (3)
17
18
19
20
21
ASSEMBLY, Fuel Pick-up (Main) (11.75” Long)
ASSEMBLY, Fuel Pick-up (Auxiliary) (5.25” Long)
FUEL GAUGE, Kelch
GROMMET, Fuel Tank Gauge
NOTE: Items 9, 10, 12 & 15 are not used with Model MZM2200KH.
MID MOUNT Z-RIDER
MANUAL No. 06110
7
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM HYDRO TRANSAXLE ASSEMBLY
(Models ZM2200K, ZM2500KH)
NOTE:
36
HYDRO TRANSAXLE MAINTENANCE
SHOULD ONLY BE PERFORMED BY
AN AUTHORISED SNAPPER DEALER.
34
35
33
28
29
37
28
29
30
31
26
25
29
28
1
27
26
25
29
28
32
24
2
19
3
20
18
17
21
4
22
6
7
5
16
23
9
15
10
8
4
6
11
5
10
12
14
PULLEY MOUNTING
DETAIL FOR R. H.
HYDRO MODULE
13
10
9
11
MANUAL No. 06110
MID MOUNT Z-RIDER
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM HYDRO TRANSAXLE ASSEMBLY
(Models ZM2200K, ZM2500KH)
ITEM
1
PART NO.
5-4437
5-4436
9-1514
9-1299
1-0935
9-0201
4-4754
3-5923
9-1787
4-2612
2-7223
9-1814
9-0505
9-1603
4-3897
9-1627
4-2639
3-5910
1-2709
2-7175
3-5915
3-5927
9-1812
1-4264
5-9440
9-1315
9-1904
5-4293
1-5753
9-1605
4-4755
3-5914
1-5894
4-5184
3-5925
9-1629
9-1786
7-2017
DESCRIPTION
ASSEMBLY, Transaxle 771B (L.H.) Side (shown)
ASSEMBLY, Transaxle 771A (R.H.) Side
WASHER, 13/32 I.D. x 13/16 O.D. Flat (4)
NUT, 3/8-16, Hex Nyloc (4)
--
2
3
4
WASHER, 3/4 I.D. x 1-1/8” O.D. Flat (7)
SET SCREW, 5/16-18 x 5/16” Hex Recess (4)
PULLEY, Transmission 4.95” Diameter (2)
SPACER/ADAPTER, Fan
5
6
7
8
SCREW, 1/4-20 x 5/8”, Hex Flange Lock, Grade 5 (8)
SPACER, Fan (2)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
WASHER, 1/4 Split Lock (4)
SCREW, 1/4-20 x 1-1/4”, Hex Head Cap (3)
SCREW, 1/4-20 x 2”, Hex Head Cap, Grade 5
NUT, 1/4-20 Hex Nyloc (8)
FAN, Blade 7” Dia. (2)
WASHER, 1/4 I.D. x 1” O.D. (2)
CAM, Neutral Return (Weldment) (2)
PLATE, Neutral Adjust (2)
RETAINING RING, 1” External (2)
BOLT, 5/16-18 x 2-1/2” Hex Head (2)
SPRING, Neutral Return Adjust (2)
SPRING, Neutral Return (2)
NUT, 1/4-28, Hex Nyloc (4)
WOODRUFF KEY, #404 (2)
ASSY, Driveshaft Bracket
WASHER, 21/64” Split Lock (6)
SCREW, 5/16-18 x 7/8”, Hex Head Cap (6)
PLATE, Neutral Return (Weldment)
BALL-JOINT (4)
NUT, 1/4-28 Hex, Grade 5 or B (4)
ROD, Threaded 1/4-28 x 6-5/8”
ROD, Threaded 1/4-28 x 5-3/8”
WOODRUFF KEY, #605 (2)
FILTER, Oil (Eaton)
ROD, Roll Release (2)
COTTER-PIN, 1/16 x 1/2” (2)
BOLT, 3/8-16 x 4-3/4” Grade 5 (4)
SPACER, Eaton Transaxle (8)
NOTE: HYDRO TRANSXALE MAINTENANCE SHOULD ONLY BE PERFORMED
BY AN AUTHORIZED SNAPPER DEALER.
MID MOUNT Z-RIDER
MANUAL No. 06110
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM HYDRO TRANSAXLE ASSEMBLY
(All Models Except ZM2200K, ZM2500KH)
NOTE:
HYDRO TRANSAXLE MAINTENANCE
SHOULD ONLY BE PERFORMED BY
AN AUTHORISED SNAPPER DEALER.
10
11
7
28
12
29
28
4
29
30
26
25
27
31
29
28
1
26
25
29
28
32
19
17
2
3
20
18
24
21
9
22
8
5
16
23
15
11
10
8
5
6
14
PULLEY MOUNTING
DETAIL FOR R. H.
HYDRO MODULE
13
MANUAL No. 06110
MID MOUNT Z-RIDER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM HYDRO TRANSAXLE ASSEMBLY
(All Models Except ZM2200K, ZM2500KH)
ITEM
1
PART NO.
5-4437
5-9154
5-4436
5-9153
9-1514
9-1299
7-2017
9-1995
4-6967
9-1786
9-1787
4-6966
2-7223
9-1814
9-0505
9-1603
4-3897
9-1627
4-2639
3-5910
1-2709
2-7175
3-5915
3-5927
9-1812
1-4264
5-9440
9-1315
9-1904
5-4293
1-5753
9-1605
4-4755
3-5914
1-5894
4-5184
3-5925
9-1629
DESCRIPTION
ASS’Y, Eaton Transaxle 771B (L.H.) Side (shown)
ASS’Y, Eaton Transaxle 771-090 (L.H.) (w/needle bearings)
ASS’Y, Eaton Transaxle 771A (R.H.) Side
ASS’Y, Eaton Transaxle 771-089 (R.H.) Side (w/needle bearings)
WASHER, 13/32 I.D. x 13/16 O.D. Flat (4)
NUT, 3/8-16, Hex Nyloc (4)
--
--
--
2
3
4
SPACER, Eaton Transaxle (8)
5
SET SCREW, 5/16-18 x 5/16” Square Head (4)
PULLEY, Transmission (Right Hand) 4.95” Diameter (2)
BOLT, 3/8-16 x 4-3/4” Hex Flange, Grade 5 (4)
SCREW, 1/4-20 x 5/8”, Hex Flange Lock, Grade 5 (8)
PULLEY, Transmission (Left Hand) 4.95” Diameter (2)
WASHER, 1/4 Split Lock (4)
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
SCREW, 1/4-20 x 1-1/4”, Hex Head Cap (3)
SCREW, 1/4-20 x 2”, Hex Head Cap, Grade 5
NUT, 1/4-20 Hex Nyloc (8)
FAN, Blade 7” Dia. (2)
WASHER, 1/4 I.D. x 1” O.D. (2)
CAM, Neutral Return (Weldment) (2)
PLATE, Neutral Adjust (2)
RETAINING RING, 1” External (2)
BOLT, 5/16-18 x 2-1/2” Hex Head (2)
SPRING, Neutral Return Adjust (2)
SPRING, Neutral Return (2)
NUT, 1/4-28, Hex Nyloc (4)
WOODRUFF KEY, #404 (2)
ASSEMBLY, Driveshaft Bracket
WASHER, 21/64” Split Lock (6)
SCREW, 5/16-18 x 7/8”, Hex Head Cap (6)
PLATE, Neutral Return (Weldment)
BALL-JOINT 1/4-28 Thread (4)
NUT, 1/4-28 Hex, Grade 5 or B (4)
ROD, Threaded 1/4-28 x 6-5/8”
ROD, Threaded 1/4-28 x 5-3/8”
WOODRUFF KEY, #605 (2)
FILTER, Oil (Eaton)
ROD, Roll Release (2)
COTTER-PIN, 1/16 x 1/2” (2)
NOTE: HYDRO TRANSXALE MAINTENANCE SHOULD ONLY BE PERFORMED
BY AN AUTHORIZED SNAPPER DEALER.
MID MOUNT Z-RIDER
MANUAL No. 06110
11
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOTREST ASSEMBLY
1A
2
12
3
13
4
6
9
14
5
10
7
11
12
6
8
MANUAL No. 06110
MID MOUNT Z RIDER
12
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOTREST ASSEMBLY
1B
ITEM
1A
1B
2
PART NO.
4-6727
5-8362
4-3843
9-1318
9-1296
4-3795
9-1298
4-3800
4-6730
4-4867
9-1508
4-4905
9-1541
4-3842
4-3794
DESCRIPTION
BRACKET, Floor Pan
WELDMENT, Floor Pan (Model ZMT2500KH only!)
PAD Left Hand Friction
3
SCREW, 5/16-18 x 3/4” Hex Head Cap
WASHER, 11/32” Flat Lock
4
5
BRACKET, Left Hand Footrest
NUT, 5/16-18 Hex Nylon Insert (2)
BRACE, Left Hand Footrest
6
7
8
BRACKET, Footrest
9
PAD, Floor Pan Trim (2)
10
11
12
13
14
BOLT, 5/16-18 x 3/4” Carriage Short Neck Grade 5
PAD, Right Hand Front Friction
SCREW, 5/16-18 x 3/4” Hex Self Tapping (6)
PAD, Right Hand Rear Friction
BRACKET, Footrest (Right Hand)
MID MOUNT Z-RIDER
MANUAL No. 06110
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRO RESERVOIR ASSEMBLY (left hand)
6
7
8
3
9
4
2
3
3
5
3
VIEWED FROM
UNDERNEATH
1
ASSEMBLY
10
ITEM
PART NO.
5-4103
3-5512
1-6130
3-5514
4-4788
4-4790
9-1508
1-1791
9-1298
1-2080
DESCRIPTION
1
2
RESERVOIR, L. H. Hydro (includes cap, item 2)
CAP, Reservoir
3
CLAMP, for 13/16” Hose (8)
HOSE, Rubber 5/8 I. D. x 13-1/2” long
HOSE, Rubber 5/8” I. D. x 20” long
BRACKET, Tank L. H.
4
5
6
7
BOLT, 5/16-18 x 3/4” Short Neck Carriage, Grade 5
RETAINER, 5/16” Bolt
8
9
NUT, 5/16-18 Hex Nyloc
10
CABLE TIE, 7” long
MANUAL No. 06110
MID-MOUNT Z-RIDER
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRO RESERVOIR ASSEMBLY (right hand)
15
14
16
3
2
3
12
3
13
VIEWED FROM
UNDERNEATH
11 ASSEMBLY
3
ITEM
PART NO.
DESCRIPTION
11
12
13
14
15
16
5-4521
4-4789
4-4787
4-4791
9-1523
7-7345
RESERVOIR, (R.H.) Hydro (Includes cap, item 2)
HOSE, Rubber 5/8” I.D. 32” Long
HOSE, Rubber 5/8” I.D. 12” Long
BRACKET, Tank, (Right Hand)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
PAD, Gas Tank (2)
MID-MOUNT Z-RIDER
MANUAL No. 06110
15
Download from Www.Somanuals.com. All Manuals Search And Download.
UPPER CHASSIS AND SEAT LATCH ASSEMBLY
7
6
2
3
1
5
4
8
9
10
ITEM
PART NO.
4-2946
7-1940
9-1298
3-5993
7-2106
9-1800
2-6292
4-4769
2-3341
9-1909
7-2111
9-0361
DESCRIPTION
1
--
2
3
--
4
5
6
7
8
UPPER CHASSIS (Models MZM2200K, ZM2501KH, ZM2502KH)
UPPER CHASSIS (Models ZMT2500KH & ZMT2501KH) (not shown)
NUT, 5/16-18 Hex Nyloc
LATCH, Seat Support
LATCH, Seat Support (MZM2300K, ZMT2500KH, ZM2501KH ZM2502KH)
BOLT, 5/16-18 Shoulder, Hex Head, Nylon Patch
SPRING
SCREEN, Drivetrain
SCREW, 1/4-20 x 3/4” Thumb (2)
WELL-NUT, 1/4-20 x 53/64” (2)
PLATE, Trim (Model ZMT2500KH Only)
SCREW, 5/16-18 x 5/8” Self Tapping (2)
9
10
MANUAL No. 06110
MID MOUNT Z-RIDER
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CASTER WHEEL ASSEMBLY
1
2
3
4
5
6
5
7
8
14
13
10
9
11
11
12
ITEM
PART NO.
DESCRIPTION
1
2
3
4
5
6
--
9-0361
3-6578
1-0965
9-1795
3-5602
4-2590
5-8760
SCREW, 5/16-18 x 5/8” Hex Flange Self Tap
CAP, Caster Shaft
RING, 1-3/16” External Retaining
WASHER, 1-1/4” Flat
BEARING, 30mm x 62mm (2)
WELDMENT, Caster Support
WELDMENT, Caster Support (5 degree)
(used on model ZMT2500KH only)
WELDMENT, Caster Yoke
NUT, 1/2-13 Hex Nyloc
ASSEMBLY, Tire & Rim (includes items 10 thru 12)
FITTING, Lube
BEARING (2)
VALVE, Air
SLEEVE, Axle
7
8
9
10
11
12
13
14
4-2591
9-1325
5-4087
1-2700
2-8722
1-2234
3-5476
9-1773
SCREW, 1/2-13 x 7-1/4”, Grade 5
MID MOUNT Z-RIDER
MANUAL No. 06110
17
Download from Www.Somanuals.com. All Manuals Search And Download.
LOWER CHASSIS/CASTER WHEEL ASSEMBLY
2
1
18
3
12B
19
4
19
18
18
18
19
21
21
18
18
4
3
6
1
20A
4
20B
2
3
13
2
5
1
7
**NOTE: This wheel assembly
contains all items from
page 17 except for items
5 and 6.
8
5
9
12A
10
13
8
15
16
11
9
10
10
*NOTE: Front axle assembly
(5-4602) contains one item
12B as well as six items
18 and three items 19.
25
10
24
15
10
22
10
23
VIEWED FROM
UNDERNEATH
14
MANUAL No. 06110
MID MOUNT Z-RIDER
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LOWER CHASSIS/CASTER WHEEL ASSEMBLY
ITEM
1
PART NO.
9-0361
3-6578
1-0965
9-1795
3-5602
5-4507
9-1888
4-2928
9-1514
9-1299
9-1901
4-2929
5-3382
4-5212
DESCRIPTION
SCREW, 5/16-18 x 5/8” Hex Flange Self Tap
CAP, Caster Shaft
2
3
RING, 1-3/16” External Retaining
WASHER, 1-1/4” I.D. x 1-7/8” O.D. Flat (2)
BEARING, 30 mm x 62 mm (2)
4
5
6
CASTER WHEEL (2) (see page 17)
BOLT, 3/8-16 x 4”, Carriage Short Neck Grade 5 (8)
TUBE, 3/4” x 5/32” x 2-45/64” (12)
WASHER, 13/32” Flat (12)
7
8
9
10
11
12A
12B
13
NUT, 3/8-16 Hex (20)
BOLT, 3/8-16 x 4-1/4” Carriage Short Neck Grade 5 (4)
WELDMENT, Front Axle (straight)
WELDMENT, Front Axle (Wide Stance)
WELDMENT, Front Axle Pivot
14
--
--
4-2792
4-7029
5-8330
FRAME, Lower (Models MZ2200K,ZM2500K) (Shown)
FRAME, Lower (Model MZM2200KH & MZM2300K)
FRAME, Lower (Models ZMT2500KH, ZM2501KH, ZM2502KH)
15
16
17
18
19
9-1790
4-6968
7-2827
7-4915
1-3864
BOLT, 3/8-16 x 1-1/4” Carriage Short Neck Gr. 5 (4)
GUARD, Skid
GUARD, Skid (Left Hand) (Not Shown)
BUSHING, DX (6)
GREASE FITTING, 3/16” Serrated (3)
20A
20B
7-4956
7-2041
BRACKET, Axle Stop (Wide Stance Caster)
BRACKET, Axle Stop (Wide Stance Caster)
21
22
23
24
25
9-2046
7-4154
9-1640
2-9355
9-1922
WASHER, 1-3/16” Flat (3)
BRACKET, Frame Stabilizer Bar (2)
BOLT, 3/8-16 x 1” Square Neck Carriage (4)
BOLT, 1/2-13 x 3-3/4” Hex Head Cap, Grade 5 (2)
NUT, 1/2-13 Hex Nyloc (2)
MID MOUNT Z-RIDER
MANUAL No. 06110
19
Download from Www.Somanuals.com. All Manuals Search And Download.
JOYSTICK CONTROL ASSEMBLY
(All Models except ZMT2500KH)
18
7
6
5
4
3
2
9
10
1
12
11
29
17
13
14
8
10
15
8
22
21
23
16
8
9
5
24
23
22
14
4
3
17
20
1
19
22
4
23
18
9
25
26
27
28
17
17
MANUAL No. 06110
MID MOUNT Z-RIDER
20
Download from Www.Somanuals.com. All Manuals Search And Download.
JOYSTICK CONTROL ASSEMBLY
(All Models except ZMT2500KH)
ITEM
PART NO.
DESCRIPTION
1
2
9-1809
4-3881
4-2638
9-1298
7-3060
1-1791
9-1296
9-1508
7-2934
1-3072
2-3656
9-0844
4-2599
9-1800
3-5533
3-5532
9-1812
9-1303
4-3871
9-1917
9-1816
1-5753
9-1605
3-5908
4-3880
2-2112
4-3874
9-1628
4-3882
COTTER PIN, 1/8” x 1-1/4” (3)
SHAFT, Hydro Left Hand
3
ARM/HUB Weldment (4)
4
NUT, 5/16-18 Hex Nyloc (7)
PLATE, Hydro Shaft (2)
5
6
RETAINER, 5/16” Bolt (2)
WASHER, 11/32” Flat (4)
BOLT, 5/16-18 x 3/4” Carriage, Grade 5 (3)
BUSHING (notched) (8)
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
ROLL PIN, 1/4 x 1” (4)
HANDLE, Plastic
ROLL PIN 3/16 x 3/4”
HANDLE, Joystick Control (Weldment)
BOLT, 5/16-18 Shoulder (4)
BLOCK, Joy Stick Control Pivot
BRACKET, Joystick Mounting
NUT, 1/4-28 Hex Nyloc (8)
BOLT, 3/8-16 x 1” Carriage Short Neck (4)
SHAFT, Joystick Control Pivot
NUT, 7/16-14 Hex
ROLL PIN, 1/4 x 2-3/4”
BALL-JOINT (8)
NUT, 1/4-28 Hex, Grade 5 or B (8)
ROD, Threaded 1/4-28 x 2-23/32 (2)
ROD, Threaded 1/4-28 x 13-21/32 (2)
SPACER (2)
PIVOT ARM, Joystick Control Weldment (2)
WASHER, 13/32” Flat
SHAFT, Hydro (Right Hand)
MID MOUNT Z-RIDER
MANUAL No. 06110
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TWIN STICK CONTROL ASSEMBLY
(Model ZMT2500KH)
MANUAL No. 06110
MID MOUNT Z-RIDER
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TWIN STICK CONTROL ASSEMBLY
(Model ZMT2500KH)
ITEM
1
PART NO.
1-0061
1-0739
1-1791
1-3072
1-3874
2-3556
3-5532
3-5533
4-2638
7-3060
5-8108
5-8109
5-8110
5-8111
5-8115
DESCRIPTION
KEY, 3/16” Square x 1”
2
RING, 5/8” External Retaining
RETAINER, 5/16” Bolt (2)
ROLL PIN, 1/4” x 1” (5)
3
4
5
BUSHING, 5/8 I. D. x 5/8” (5)
BUSHING, Caster
6
7
BRACKET, Joystick Mounting
BLOCK, Pivot
8
9
WELDMENT, Arm/Hub (4)
PLATE, Bushing, Hydro Shaft (2)
WELDMENT, R. H. Control Bellcrank
WELDMENT, L. H. Control Bellcrank
WELDMENT, R. H. Control
WELDMENT, L. H. Control
10
11
12
13
14
15
ASSEMBLY, Ball Joint Link 5.12” (2)
Includes 7-1970 (Rod), 1-5753 Ball Joint (2) & 9-1605 Hex Nut (2)
16
17
5-8116
5-8117
ASSEMBLY, Ball Joint Link 20.4”
Includes 7-1971 (Rod), 1-5753 Ball Joint (2) & 9-1605 Hex Nut (2)
ASSEMBLY, Ball Joint Link 20.56”
Includes 7-1971 (Rod), 1-5753 Ball Joint (2) & 9-1605 Hex Nut (2)
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
7-1944
7-1945
7-1959
7-3061
7-1964
7-2022
7-2047
7-2212
7-2442
9-0361
9-0848
9-1016
9-1067
9-1099
9-1190
9-1296
9-1298
9-1303
9-1508
9-1628
9-1800
9-1809
9-1812
9-1816
7-2934
9-2009
9-2010
HYDRO SHAFT, L.H.
HYDRO SHAFT, R.H.
PLATE, R.H. Bearing
PLATE, L.H. Bearing (Twin-Stick Z Mower)
ARM, R.H. Twin Stick Control
ARM, L.H. Twin Stick Control
BRACKET, Dampener Mounting
GRIP, Twin Stick (2)
BRACKET, Joystick Control
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap (2)
SET SCREW, 5/16-18 x 1/2” Square Head Cup Point (2)
SCREW, 1/4-20 x 5/8” Hex Head Self-Tap (4)
NUT, 5/16-18 Hex Center Lock, Grade 8 (4)
NUT, 1/4-20 Hex Center Lock, Grade 5 or B (4)
BOLT, 5/16-18 x 1-1/2” Curved Head Square Neck (4)
WASHER, .34 I.D. Flat (20)
NUT, 5/16-18 Hex Nyloc (7)
BOLT, 5/16-18 x 1” Round Head Short Neck Carriage, Grade 5 (3)
BOLT, 5/16-18 x 3/4” Round Hd. Short Neck Carriage, Grade 5 (3)
WASHER, 5/8” I. D. Flat
BOLT, 5/16-18 Shoulder (4)
COTTER PIN, 1/8 x 1-1/4” (2)
NUT, 1/4-28 Hex Nyloc (9)
ROLL PIN, 1/4 x 2-3/4”
BUSHING, .632 I. D. x .753 O.D. Teflon Impregnated (2)
CYLINDER, Dampener
BOLT, 1/4-20 Socket Head Shoulder (4)
MID MOUNT Z-RIDER
MANUAL No. 06110
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE ASSEMBLY
18
19
15
18
19
15
12
6
12
6
13
12
16
9
12
1
13
3
5
12
8B
12
4
2A
2B
17
11
14
10
7
8A
13
7
MANUAL No. 06110
MID MOUNT Z-RIDER
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE ASSEMBLY
ITEM PART NO.
DESCRIPTION
1
1-2068
2-6420
7-2222
RING, Rear Lift Arm (3)
2A
2B
GRIP, Flat Bar (Models ZM2200K & ZM2500K)
GRIP, Park Brake Lever (Models ZMT2500KH, MZM2200KH,
MZM2300K, ZM2501KH, ZM2502KH)
3
4-6451
1-0935
4-6449
4-3876
3-6399
4-6469
5-8082
SWIVEL, Adjustable
4
WASHER, 3/4” I.D. x 1-1/8” O.D. x 1/16 Thick, Flat
ROD, Brake Parking
5
6
ROD, Hydrostatic Brake (2)
7
SLEEVE Bearing, 1/2 I.D. x 5/8 O.D. (2)
WELDMENT, Brake Arm (Models ZM2200K & ZM2500K)
8A
8B
WELDMENT, Brake Arm (Models ZMT2500KH, MZM2200KH,
MZM2300KH, ZM2501KH, ZM2502KH)
9
4-3875
4-2647
4-2648
9-1597
9-1514
9-1523
9-1605
9-1809
1-4001
9-1812
9-1832
SHAFT, Brake (Weldment)
10
11
12
13
14
15
16
17
18
19
BRACKET, Joystick Lockout (Weldment)
PLATE, Support (Weldment)
COTTER PIN, 3/32 x 3/4” (6)
WASHER, 13/32 I.D. x 13/16 O.D. x 5/64 Flat (3)
SCREW, 5/16-18 x 5/8” Hex Self-Tapping (3)
NUT, 1/4-28 Hex, Grade 5 or B (2)
COTTER PIN, 1/8 x 1-1/4
PIN, 1/8 x 3/4” Roll
NUT, 1/4-28 Hex Nyloc (2)
SWIVEL, 1/4” Smooth (2)
MID MOUNT Z-RIDER
MANUAL No. 06110
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT SUPPORT ASSEMBLY
ADJUSTER WITH LOCK
See Pages 44 and 45
9, 9A
12
15
14
14
1
11
3
15
16
14
6
4
10
2
8
5
13
14
7
MANUAL No. 06110
MID MOUNT Z-RIDER
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT SUPPORT ASSEMBLY
9B
3
1
14
14
16
16
3
1
14
16
16
10A
15
15
15
15
ITEM PART NO.
DESCRIPTION
1
2
3
4
--
5
6
7
1-5761
2-3354
9-0951
3-6492
9-2007
2-2793
2-2794
2-3606
3-3362
3-5827
4-6960
7-2015
7-2210
7-2034
3-5839
9-1046
9-1296
9-1298
9-1508
1-1791
BOLT, 5/16-18 x 3/4” Shoulder (2)
SWITCH, Seat (Normally Closed)
NUT, 5/16-18 Hex Flange Lock (2)
SPRING (2)
SPRING (Models MZM2200KH, MZM2300K & ZMT2500KH Only)
BUSHING, Molded Seat, 1/2 I.D. x 5/8” O.D. (2)
SPACER, 5/16 I.D. x 1-3/8” Long (2)
CAP, Vinyl (2)
HOLDER, Seat Switch
PLATE, Seat Support
PLATE, Seat Support (Models MZM2200K & MZM2300K Only)
PLATE, Seat Support (Model ZMT2500KH Only)
HINGE, Seat Support
8
9
9A
9B
10
10A
11
12
13
14
15
16
BRACKET, Seat Hinge (Model ZMT2500KH Only)
BRACKET, Upper Seat Support Hinge (Used on all but ZMT2500KH)
SCREW, 5/16-18 x 2-1/2” Hex Head Cap, Grade 5 (2)
WASHER, 5/16 x 11/16 O.D. Flat (10)
NUT, 5/16-18 Hex Nyloc (12)
BOLT, 5/16-18 x 3/4 Carriage Grade 5 (6)
RETAINER, 5/16” Bolt (5)
MID MOUNT Z-RIDER
MANUAL No. 06110
27
Download from Www.Somanuals.com. All Manuals Search And Download.
FENDER/CONTROL CABLE ASSEMBLY
9
14
13
8
8
10
14
2
13
13
1
13
3
12
11
13
11
13
10
4
7
6
14
5
13
13
17
18
17
18
13
14
19
19
15
16
ITEM
PART NO. DESCRIPTION
ITEM
PART NO. DESCRIPTION
1
2
3-5548
3-5940
HANDLE, 5/8” Tubing
PLATE, Joystick Control
(shown)
COVER, Joystick Hole (Model
ZMT2500KH Only)
FENDER, Right Hand
FENDER, Right Hand (MZM
Models Only)
9
4-4820
4-6863
9-0913
9-1523
BRACKET, Instrument Panel
(shown)
BRACKET, Instrument Panel
(MZM Models Only)
SCREW, #10-24 x 1/2” Hex
Washer Self-Tap Torx (8)
SCREW, 5/16-18 x 5/8” Hex
Washer Self-Tapping (9)
NUT, 1/4-20 Hex Nyloc
SCREW, 1/4-20 x 3/4” Hex
Cap Grade 5 (21)
--
--
7-2043
10
11
3
--
4-2984
4-6407
4
--
4-2985
4-7006
FENDER, Left Hand
FENDER, Left Hand (MZM
Models Only)
12
13
9-1603
9-1906
5
--
4-2986
4-6420
BRACKET, R. H. Headlight
BRACKET, Right Hand (MZM
Models Only)
BRACKET, L. H. Headlight
BRACKET, Left Hand (MZM
Models Only)
14
15
16
17
18
2-3295
3-5837
3-5838
2-3655
9-1017
U-NUT, 1/4-20 Lock, (16)
CABLE, Choke, Kohler
CABLE, Throttle, Kohler
LEVER, Throttle Control (2)
SCREW, #8-32 x 3/8” Curved
Machine (2)
6
--
4-2987
4-6421
7
8
4-3898
4-4700
BRACKET, Fender Brace
BRACKET, Rear Fender (2)
19
9-1018
NUT, #8-32 Hex (2)
MANUAL No. 06110
MID MOUNT Z-RIDER
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CUTTER HOUSING ASSEMBLY
15
2
4
14
7A
18
6
17
12
3
13
1
10
7B
11
16
8
9
5
1
ITEM
1
2
3
4
PART NO.
2-9422
2-9270
2-9274
5-9311
2-9254
2-9271
2-9246
7-3395
1-7037
1-7081
7-3396
1-6440
6-3234
2-9275
2-9252
2-9384
2-9302
2-9249
6-3237
9-1299
6-3238*
1-3370*
DESCRIPTION
BEARING, Sealed (2)
WASHER, Spindle
SNAP-RING, Spindle Shaft
SHAFT, Spindle
5
6
SPACER, Bearing
SPACER, Blade (4)
7A
7B
7C
7D
7E
8
BLADE, 18” (ZM5200M Mower)
BLADE, Low Lift 18” (ZM5201M, ZM5202M Mower)
BLADE, High Lift 18” (ZM5202M Mower)
BLADE, 21” (ZM6100M & ZM6102M Mowers)
BLADE, Low Lift 21” (ZM6101M, ZM6102M Mower)
WASHER, Beveled
BOLT, 5/8-11 x 7-1/2” Hex Head Cap, Grade 5
FITTING, Lube
HOUSING, Cutter
VENT, Spindle
BOLT, 3/8-16 x 1-1/4” Rib Necked (6)
PULLEY, 5-3/4” O.D.
NUT, 5/8-11 Hex Flange Grade 5
NUT, 3/8-16 Hex Nyloc (6)
SEAL, Nylos
9
10
11
12
13
14
15
16
17
18
WASHER
NOTE: 5-4017 (Spindle Housing Sub-Asy.) is made of items 11 & 12 (one each) and item 13 (six each).
*NOTE: For Bearing Pre-Seal Kit (6-3240) installation, discard item 3 and replace with items 17 & 18 as shown.
MID MOUNT Z-RIDER
MANUAL No. 06110
29
Download from Www.Somanuals.com. All Manuals Search And Download.
UPPER DRIVE SHAFT ASSEMBLY
2
5
14
14
15
4
5
See pages 8 thru 11,
item 24
10
14
5
1
16A
2
12
10
5
14
15
18B
22
11
16A
11
16A
11
16B
7
11
16
9
19
11
18A
3
3
16
21
20
17B
6
17A
21
8C
8A
17B
8B
17A
MANUAL No. 06110
MID MOUNT Z-RIDER
30
Download from Www.Somanuals.com. All Manuals Search And Download.
UPPER DRIVE SHAFT ASSEMBLY
ITEM PART NO.
DESCRIPTION
1
2
3
1-4338
1-4803
4-7225
DISC, Flexible
SPACER, Coupling (2)
FLANGE, Bearing (2) (requires Item 18A, order separately)
(Models MZM2200K & MZM2300K)
4
1-8626
3-2070
4-5254
7-2357
9-1803
7-4916
3-5564
7-2266
HUB, Drive Shaft Adapter
5
WASHER, 13/32 I.D. x 3/4 O.D., Flat (4)
6
BELT, Traction Drive (AX Cogged, 34.35 Eff. Length) (2)
BELT, Traction Drive (2) (Model ZMT2500KH Only)
KEY, 3/16 x 1-1/2” Square
--
7
8A
8B
8C
PULLEY, Dual V-Groove (4.95” O.D.) (requires items 20 & 21)
PULLEY, Dual V-Groove (4.95 O.D.) (includes 17B (2))
PULLEY, Dual V-Groove (5.45 O.D.) (includes 17A (2))
(used on Model ZMT2500KH Only)
9
4-2805
9-0848
9-1298
9-1299
9-1304
9-1328
9-1320
9-1497
9-1508
DRIVE SHAFT, 3/4” Upper
10
11
12
13
--
SET SCREW, 5/16-18 x 1/2” Square Head (2)
NUT, 5/16-18 Hex Nyloc (3)
NUT, 3/8-16 Hex Nyloc (2)
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (2)
SCREW, 3/8-16 x 1-1/4” Hex Head Cap, Grade 5 (2)
WASHER, 3/8” Split Lock (2)
14
15
16A
SCREW, 3/8-16 x 1-1/2” Hex Head Cap, Grade 5 (2)
BOLT, 5/16-18 x 3/4”, Carriage, Grade 5 (3)
(Models MZM2200K, MZM2300K & ZM2501KH)
16B
17A
17B
18A
18B
9-1928
9-1802
9-2018
1-5971
5-4655
BOLT, 5/16-18 x 1-1/4” Square Neck Carriage Gr. 5 (3)
SCREW, 5/16-18 x 5/8”, Socket-Head (2)
SET SCREW, 5/16-18 x 3/4” Square Head (2)
BEARING (MZM Models Only, use with item 19)
ASSEMBLY, Flange/Bearing/Lock Collar
(Includes 1-4625, 3/4” Lock Collar w/Set Screw and 4-5246, Flange Bearing)
19
20
21
22
1-4625
7-4917
9-1814
7-2318
LOCK COLLAR, 3/4” I.D. (includes 1/4-28 set screw)
PULLEY HUB, Taper-Lock
SCREW, 1/4-20 x 1-1/4” Hex Head Cap (2)
SUPPORT, Bearing Mount
MID MOUNT Z-RIDER
MANUAL No. 06110
31
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK DRIVESHAFT ASSEMBLY
(Except for MZM Models)
6
MOUNTS TO LOWER
FRAME MIDDLE BRACE
SEE NEXT PAGE
17
4
18
25
23
14
17
16
26
26
18
COMPONENT OF
LOWER FRAME
WELDMENT
14
SEE NEXT PAGE
22
12
23
NOTE: ITEM 12 ALSO MOUNTS
TO LEFT & RIGHT TRANSAXLES
SEE PAGES 8 THRU 11
8
7A, 7B
15
MOUNTS TO ENGINE BASE
SEE NEXT PAGE
18
25
26
26
1
16
15
19
18
14
5
4
9
17
13
10
6
11
20
16
24
3
2
3
21
MANUAL No. 06110
MID MOUNT Z-RIDER
32
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK DRIVESHAFT ASSEMBLY
(Except for MZM Models)
LOWER
FRAME
WELDMENT
ENGINE
BASE
LOWER
FRAME
MIDDLE
BRACE
ITEM
PART NO.
1-2315
1-3324
1-4409
4-7227
9-0990
4-2801
3-5531
7-2388
DESCRIPTION
1
KEY, 1/4 x 2” Square
2
FITTING, Lube (45 degree, for 3/16” hole)
BUSHING (2)
3
4
BEARING, 1” I.D. (2)
5
BOLT, 3/8-16 x 2” Short Neck Carriage, Grade 2
DRIVE SHAFT, Deck (1” Diameter, 15 Spline)
PULLEY, Double V (5.45 O.D., A Section)
6
7A
7B
PULLEY, Double V (4.95 O.D., A Section)
(Models ZMT2500KH, ZM2501KH, ZM2502KH)
BELT, Deck Drive (HA 36.5 Effective Length) (2)
8
3-5543
7-2293
--
BELT, Deck Drive (AX 38.5 Effective Length) (2)
(Model ZMT2500KH, ZM5201KH, ZM2502KH)
SPRING, Torsion
9
3-5713
3-5816
3-5867
4-2865
4-2622
9-0776
9-1802
9-0848
9-1298
9-1299
9-1303
9-0122
9-1518
9-1598
9-1787
2-7181
9-1804
1-4265
4-7226
10
11
12
13
14
15
--
STUD, Idler (3/8-24 Thread)
FLAT IDLER, 2-3/4” O.D x 1-1/4” Wide
WELDMENT, Hydro Support
WELDMENT, Idler Arm
SET SCREW, 1/4-20 x 1/4” Socket Head, Cone Point (4)
SET SCREW, 5/16-18 x 5/8” Socket Hd., Cup Pt. (used with 7A)
SET SCREW, 5/16-18 x 1/2” Sq. Hd. Knurled Cup (used with 7B)
NUT, 5/16-18 Hex Nyloc (6)
16
17
18
19
20
21
22
23
24
25
26
NUT, 3/8-16 Hex Nyloc (5)
BOLT, 5/16-18 x 1” Round Head Short Neck, Grade 5 (6)
WASHER, 3/8” Flat (3)
NUT, 3/8-24 Hex Nyloc
COTTER PIN, 1/8 x 3/4”
SCREW, 1/4-20 x 5/8” Hex Flange Lock, Grade 5 (16)
BOLT, 3/8-16 x 1-1/4” Short Neck Carriage, Grade 5 (4)
WASHER, 9/16” Flat
ASSEMBLY, Lock Collar, 1” (with 1/4” Set Screw, item 14)
FLANGE, 1” Bearing (4)
MID MOUNT Z-RIDER
MANUAL No. 06110
33
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK DRIVESHAFT ASSEMBLY
(MZM Models)
6
MOUNTS TO LOWER
FRAME MIDDLE BRACE
SEE NEXT PAGE
17
4
18
25
23
14
17
16
26
26
18
COMPONENT OF
LOWER FRAME
WELDMENT
14
SEE NEXT PAGE
22
12
23
NOTE: ITEM 12 ALSO MOUNTS
TO LEFT & RIGHT TRANSAXLES
SEE PAGES 8 THRU 11
8
7
15
25
MOUNTS TO ENGINE BASE
SEE NEXT PAGE
18
26
15
1
11
16
19
18
14
5
4
17
13
6
10
9
16
20
24
3
3
21
2
MANUAL No. 06110
MID MOUNT Z-RIDER
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK DRIVESHAFT ASSEMBLY
(MZM Models)
LOWER
FRAME
WELDMENT
ENGINE
BASE
LOWER
FRAME
MIDDLE
BRACE
ITEM
1
PART NO.
1-2315
1-3324
1-4409
4-7227
9-0990
4-2801
4-6969
5-8209
3-5713
3-5816
1-8573
4-2865
4-2622
9-0776
9-1995
9-1298
9-1299
9-1303
4-7213
9-1518
9-1598
9-1787
2-7181
9-1804
1-4265
4-7226
DESCRIPTION
KEY, 1/4 x 2” Square
2
FITTING, Lube (45 degree, for 3/16” hole)
BUSHING (2)
3
4
BEARING, 1” I.D. (2)
5
BOLT, 3/8-16 x 2” Short Neck Carriage, Grade 2
DRIVE SHAFT, Deck (1” Diameter, 15 Spline)
PULLEY, Single V (5.75” O.D., B Section)
BELT, Deck Drive (AX 36.5” Effective Length)
SPRING, Torsion
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
STUD, Idler (3/8-24 Thread)
PULLEY, Idler (3.56” O.D.)
WELDMENT, Hydro Support
WELDMENT, Idler Arm
SET SCREW, 1/4-20 x 1/4” Socket Head, Cone Point (4)
SET SCREW, 5/16-18 x 5/8” Socket Head, Knurled Point
NUT, 5/16-18 Hex Nyloc (6)
NUT, 3/8-16 Hex Nyloc (5)
BOLT, 5/16-18 x 1” Round Head Short Neck, Grade 5 (6)
SPACER, Idler
NUT, 3/8-24 Hex Nyloc
COTTER PIN, 1/8 x 3/4”
SCREW, 1/4-20 x 5/8” Hex Flange Lock, Grade 5 (16)
BOLT, 3/8-16 x 1-1/4” Short Neck Carriage, Grade 5 (4)
WASHER, 9/16” Flat
ASSEMBLY, Lock Collar, 1” (with 1/4” Set Screw, item 14)
FLANGE, 1” Bearing (4)
MID MOUNT Z-RIDER
MANUAL No. 06110
35
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK LIFT SYSTEM
38
12
6
22
23
21
11B
23
27
22
36
11B
12
13
20
24
5
25
9B
38
5
39
13
19
20
14
29
21
21
20
17
29
27
23
10
24
11A
5
12
39
22
3
41
41
8, 8A
28
13
38
6
24
25
14
18
5
24
18
24
3
2
9A
37
1
20
21
16
10
23
11A
22
26
38
22
12
4
26
13
33
37
24
34
26
35
31
32
24
24
MANUAL No. 06110
MID MOUNT Z-RIDER
15
30
28
28
36
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK LIFT SYSTEM
ITEM
PART NO.
1-4354
1-5020
3-4453
4-3801
4-3803
DESCRIPTION
1
2
3
4
5
WASHER, 29/32” I.D. x 1-1/4” O.D.
RING, 7/8” External Retaining
WASHER, 25/32” x 1-1/2” Flat (ZM Series 0 Models Only) (2)
BRACKET, Deck Height Quadrant
BRACKET, Deck Support (4)
6
--
7
4-3819
7-2422
4-3823
PLATE, Rear Link (4.95” long) (2) (ZM Series 0 Models Only)
PLATE, Rear Link (4.33” long) (2) (ZMT, MZM & ZM Series 1 & 2 Models)
WELDMENT, Lift Handle Link
8
4-3827
5-8741
LIFT, Front Deck (ZM Series 0 Models Only)
8A
LIFT, Front Deck (ZMT, MZM & ZM Series 1 Models)
9A
9B
10
4-6404
5-8225
7-3196
7-3197
4-4859
4-6412
4-4860
WELDMENT, Shaft Deck Lift (ZM Series 0 Models Only)
WELDMENT, Shaft Deck Lift (ZMT, MZM & ZM Series 1 & 2 Models)
PLATE, Front Link (5.45” long) (2) (ZM Series 0, 1 & 2 & ZMT Models)
PLATE, Front Link (5.20” long) (2) (MZM Model Only)
SWIVEL, Spring Anchor (ZM Series 0 Models Only) (2)
BRACKET, Spring Adjustment (2) (ZMT, MZM & ZM Series 1 & 2 Models)
EYEBOLT, 5/16-18 x 3” (2)
--
11A
11B
12
13
14
15
16
7-2225
4-4870
1-5019
5-4543
SPRING, Extension Lift Assist (2)
PLATE, Shim (6)
PLUG, Rod
ASSEMBLY, Pivot Plate (Includes 4-3804 Weldment, 1-3864 Lube Fitting
and two 1-8289 Sleeve Bearings)
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
4-4857
9-0820
9-1194
9-0188
9-1298
9-1299
9-0122
9-1587
9-1612
9-1640
9-1714
9-1809
9-1894
4-4833
1-9363
1-4361
1-4432
4-3833
1-4437
4-4858
9-1947
9-2017
9-0559
9-1508
9-0393
WELDMENT, Timing Rod
NUT, 3/4-16 Hex Jam Lock (used on ZM Series 0 Only) (2)
WASHER, 17/32” x 1-1/2”
WASHER, 11/32” x 11/16” Flat (8)
NUT, 5/16-18 Hex Nylon Insert (8)
NUT, 3/8-16 Hex (7)
WASHER, 3/8” Flat (4)
WASHER, 17/32” x 1-1/16” (8)
BOLT, 5/16-18 x 1-1/2” Carriage Grade 5 (4)
BOLT, 3/8-16 x 1” Carriage (5)
BOLT, 5/16-18 x 1-1/2” Carriage Grade 5 (4)
PIN, 1/8” x 1-1/4” Cotter (3)
NUT, 1/2-13 Hex Center Lock Grade 5 (3)
ROD, Lift Lever
GRIP, Lift Lever Handle
CAP, Lift Rod
SPRING
WELDMENT, Deck Lift Lever
PIN, 1/4” x 2-1/4” Groove
SWIVEL, Timing Rod
PIN, 1/8 x 1/2” Hair (used on ZM Series 0 Only) (4)
BOLT, 1/2-20 Shoulder (ZMT, ZM & MZM Series 1 & 2 Models) (4)
NUT, 1/2-20 Hex Jam (ZMT & ZM Series 1 Models) (2)
BOLT, 5/16-18 x 3/4” Carriage, Gr. 5 (ZMT & ZM Series 1 & 2 Models) (6)
NUT, 1/2-20 Hex Nyloc (4)
MID MOUNT Z-RIDER
MANUAL No. 06110
37
Download from Www.Somanuals.com. All Manuals Search And Download.
52” DECK, IDLERS, ROLLERS
1
2
3
7
4
43
6
9
5
8
7
42
11
8
49
9
41
13
44
39
45
39
6
6
40
37
36
6
38
7
10
8
25
46
35
34
31
11
12
15
2
32
30
16
53
33A
17
18
14
12
8
12
19
8
6
18
20
6
6
50
48
21
26
29
22
6
23
24
47
27
49
28
MANUAL No. 06110
MID MOUNT Z-RIDER
38
Download from Www.Somanuals.com. All Manuals Search And Download.
52” DECK, IDLERS, ROLLERS
56
55
55
54
33B
12
55
52
53
56
51
55
ITEM PART NO.
DESCRIPTION
ITEM PART NO.
DESCRIPTION
27
5-8342
GEARBOX, Right Angle
(Peerless Series 1000-52)
SCREW, 3/8-16 x 1-1/4” Gr. 5(2)
KEY, #6 Woodruff
NUT, 3/8-16 Hex Flange
SPRING, Extension
1
2
3
9-1899
9-1331
9-1802
SCREW, 3/8-24 x 1” Cap, Gr. 5
WASHER, 13/32” Flat (2)
SET-SCREW, 5/16” x 5/8”
Socket Head (2)
PULLEY, Cast 5-3/4” O.D.
SPACER
NUT, 3/8-16 Hex Nyloc (17)
SCREW, 3/8-16 x 2” (3)
WASHER, 7/16” Flat (12)
PULLEY, 5-1/2 Idler (2)
SPACER, 3/4” Outside Diameter
SCREW, 3/8-16 x 1-3/4” Hex
Head Cap Grade 5 (3)
SCREW, 3/8-16 x 1” Hex Head
Cap, Grade 5 (13)
28
29
30
31
32
9-1328
1-0008
9-0613
3-5667
1-3847
4
5
6
7
8
9
10
11
4-2867
3-5668
9-1299
9-1305
9-1300
3-5789
3-5858
9-1553
RETAINER, 3/8” Bolt
33A 9-1822
33B 9-2072
SCREW, 1/2-13 x 5” Cap (2)
SCREW, 1/2-13 x 7” Gr. 5 (2)
FORK, Gauge Wheel (2)
SPACER, Gauge Wheel (2)
WHEEL, Gauge (2)
NUT, 1/2-13 Hex Nylock (2)
WELDMENT, Idler Pivot
BUSHING, Caster (2)
WELDMENT, Idler Arm
WASHER, 1-1/32” Flat
RING, 1” External Retaining
BELT, 52” HB (122”)
ZERK, 1/4-28 Self Tapping
WELDMENT, Gauge Wheel (2)
SPACER, 3/8” Inside Dia. (2)
DRIVESHAFT, Telescoping
(Includes items 48-50)
KEY, #9 Woodruff
SET SCREW, 3/8-16 x 3/8” Hex
Recess (2)
FITTING, 1/4-28 Lube
L-BRK’T, Deck Stabilizer Bar (2)
WASHER, 3/8” Flat (4)
NUT, 3/8-16 Hex Center Lock (8)
STRUCTURE, 52” Stabilizer
Bar (2)
34
35
36
37
38
39
40
41
42
43
44
45
46
47
3-6457
3-6456
2-9264
9-1325
4-2976
2-3556
4-2619
3-2031
1-2709
4-2776
7-6998
4-1821
4-4752
5-8494
12
9-1304
13
14
15
3-6449
4-4784
9-1541
STAND, Fixed Idler
WELDMENT, Deck, 52”
SCREW, 5/16-18 x 3/4” Hex
Washer Self Tap (3)
CAP, Caster Shaft (3)
SPACER, 1” (6)
BEARING, Radial Flanged (6)
WELDMENT, Gauge Wheel
Bracket
BUSHING, 1” Machine (3)
WELDMENT, Gauge Wheel
Caster (3)
SCREW, 3/8-16 x 6” (3)
ROLLER, 3-3/4” x 4-13/16”
Nylon (3)
TUBE, Axle (3)
BOLT, 3/8-16 x 1” Carriage,
Grade 5 (5)
16
17
18
19
4-4839
2-1960
4-4892
4-4643
48
49
1-0211
9-0132
20
21
2-3747
4-4646
50
51
52
53
54
1-2700
7-4155
9-0122
9-1585
5-9184
22
23
9-1617
7-9868
24
25
7-9882
9-1640
55
56
2-9258
2-9263
BUSHING, Suspension (8)
SLEEVE, Suspension (4)
26
3-6455
GEARBOX, Shim
MID MOUNT Z-RIDER
MANUAL No. 06110
39
Download from Www.Somanuals.com. All Manuals Search And Download.
61” DECK, IDLERS, ROLLERS
1
2
7
4
36
43
3
37
6
8
11
35
5
12
7
9
45
8
33A
25
9
13
42
41
39
44
6
6
34
46
40
6
8
10
11
25
7
39
2
38
15
32
31
30
16
53
14
17
18
25
8
12
19
8
6
6
18
6
20
50
26
21
6
48
29
22
47
23
27
24
49
28
MANUAL No. 06110
MID MOUNT Z-RIDER
40
Download from Www.Somanuals.com. All Manuals Search And Download.
61” DECK, IDLERS, ROLLERS
56
55
55
54
33B
12
55
52
53
56
51
55
ITEM PART NO.
DESCRIPTION
ITEM PART NO.
DESCRIPTION
27
5-8342
GEARBOX, Right Angle
(Peerless Series 1000-52)
SCREW, 3/8-16 x 1-1/4” Gr. 5(2)
KEY, #6 Woodruff
NUT, 3/8-16 Hex Flange
SPRING, Extension
1
2
3
9-1899
9-1331
9-1802
SCREW, 3/8-24 x 1” Cap, Gr. 5
WASHER, 13/32” Flat (2)
SET-SCREW, 5/16” x 5/8”
Socket Head (2)
PULLEY, 5.25 Cast
SPACER
NUT, 3/8-16 Hex Nyloc (17)
SCREW, 3/8-16 x 2” (3)
WASHER, 7/16” Flat (12)
PULLEY, 5-1/2 Idler (2)
SPACER, 3/4” Outside Diameter
SCREW, 3/8-16 x 1-3/4” Hex
Head Cap Gr. 5 (3)
SCREW, 3/8-16 x 1” Hex Head
Cap (13)
STAND, Fixed Idler
WELDMENT, Deck, 61”
SCREW, 5/16-18 x 3/4” Hex Self
Tapping (3)
CAP, Caster Shaft (3)
SPACER, 1” (6)
BEARING, Radial (6)
WELDMENT, Gauge Wheel
Bracket
BUSHING, 1” Machine (3)
WELDMENT, Gauge Wheel
Caster (3)
SCREW, 3/8-16 x 6” (3)
ROLLER, 3-3/4” x 4-13/16”
Nylon (3)
28
29
30
31
32
9-1328
1-0008
9-0613
3-5667
1-3847
4
5
6
7
8
9
10
11
7-4466
3-5668
9-1299
9-1305
9-1300
3-5789
3-5858
9-1553
RETAINER, 3/8” Bolt
33A 9-1822
33B 9-2072
SCREW, 1/2-13 x 5” Cap (2)
SCREW, 1/2-13 x 7”, Gr. 5 (2)
FORK, Gauge Wheel (2)
SPACER, Gauge Wheel (2)
WHEEL, Gauge (2)
NUT, 1/2-13 Hex Nylock (2)
WELDMENT, Idler Pivot
BUSHING, Caster (2)
WELDMENT, Idler Arm
WASHER, 1-1/32” Flat
RING, 1” External Retaining
BELT, 61” HB (134-1/2”)
ZERK, 1/4-28 Self Tapping
WELDMENT, Gauge Wheel (2)
SPACER, 3/8” Inside Diameter
DRIVESHAFT, Telescoping
(Includes items 48-50)
KEY, #9 Woodruff
SET SCREW, 3/8-16 x 3/8” Hex
Recess (2)
FITTING, 1/4-28 Lube
BRACKET, Deck Stabilizer
WASHER, 3/8” Flat (4)
NUT, 3/8-16 Hex Center Lock (8)
STRUCTURE, 61” Stabilizer
Bar (2)
34
35
36
37
38
39
40
41
42
43
44
45
46
47
3-6457
3-6456
2-9264
9-1325
4-1295
2-3556
4-2619
3-2031
1-2709
3-5542
7-6998
4-1821
4-4752
5-8494
12
9-1304
13
14
15
3-6449
4-3847
9-1541
16
17
18
19
4-4839
2-1960
4-4892
4-4643
48
49
1-0211
9-0132
20
21
2-3747
4-4646
50
51
52
53
54
1-2700
7-4155
9-0122
9-1585
5-9166
22
23
9-1617
7-9868
24
25
7-9882
9-1640
TUBE, Axle (3)
BOLT, 3/8-16 x 1” Carriage,
Grade 5 (6)
55
56
2-9258
2-9263
BUSHING, Suspension (8)
SLEEVE, Suspension (4)
26
3-6455
GEARBOX, Shim
MID MOUNT Z-RIDER
MANUAL No. 06110
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CHUTE, DECK COVERS & BAFFLE
FRONT AXLE
(Page 18, Item 12A)
REAR LINK PLATE
(See Pages 36 and 37)
1
1
4
3
2
4
3
FRONT LINK PLATE
(See Pages 36 and 37)
1
17
4
5
16*
2
1
5
3
6
4
5
15
DECK
(See Pages 38 thru 41)
8
7
9
13
10
12
11
10
*NOTE: Item 16 not used with
Wide Stance Front Axle
14
MANUAL No. 06110
MID MOUNT Z-RIDER
42
Download from Www.Somanuals.com. All Manuals Search And Download.
CHUTE, DECK COVERS & BAFFLE
ITEM
PART NO.
DESCRIPTION
1
2
9-1587
4-3824
9-1299
9-1516
9-1948
4-4670
9-1304
9-1331
4-2914
3-6445
9-1640
9-1313
2-9277
2-7950
4-2903
4-4806
4-2656
5-8291
4-4756
4-5339
1-2802
WASHER, 17/32 x 1-1/16 Flat (10)
BRACKET, Rear Lift (2)
NUT, 3/8-16 Hex (12)
3
4
PIN, 5/32 x 1” Cotter (8)
PIN, 1/2 x 23/32 Clevis (6)
BRACKET, Front Lift (2)
SCREW, 3/8-16 x 1” Hex Cap (6)
WASHER, 13/32 x 1-1/2” Flat (6)
BAFFLE, 52 Front (2)
5
6
7
8
9
--
BAFFLE, 61 Front (2)
10
11
12
13
14
--
BOLT, 3/8-16 x 1” Carriage (12)
PIN, 3/32 x 1” Cotter
PIN, Chute Hinge
SPRING, Chute
CHUTE, 52” Deck
CHUTE, 52” Deck (Euro)
CHUTE, 61” Deck
--
--
CHUTE, 61” Deck (Euro)
COVER, Spindle (2)
15
16
17
WELDMENT, Pull Bar
PIN, 1/2 x 1-1/8” Clevis (2)
MID MOUNT Z-RIDER
MANUAL No. 06110
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT ASSEMBLY
(Except for MZM2200K & MZM2300KH)
25
7
3
24
7
23
1
26
22
16
14
18
15
17
17
14
6
13
21
5
20
19
4
11
9
11
27
2
12
10
8
MANUAL No. 06110
MID MOUNT Z-RIDER
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT ASSEMBLY
(Except for MZM2200K & MZM2300KH)
ITEM PART NO.
DESCRIPTION
**
5-4117
**
SEAT ASSEMBLY (Includes indented items below)
PAN, Complete
1
2
3-6476
3-6477
4-4724
3-5568
3-6478
3-6479
3-6484
3-6485
**
CUSHION, Seat
3
CUSHION, Back
4
BRACKET, Armrest (Right Hand
BRACKET, Armrest (Left Hand)
CHANNEL, Armrest
5
6
7
ARM PAD, Grey (2)
8
ADJUSTER (with lock)
9
ADJUSTER (without lock)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
STUD GUARD (4)
3-6486
9-1296
9-1601
**
SPACER, Bell (4)
WASHER, 5/16” Flat (8)
NUT, 5/16-18 Hex Flange Lock, Grade 5 (6)
SCREW, 1/4-20 x 3/4” Phillips (9)
SCREW, #8-32 x 1/2” Self Tapping (2)
SCREW, 5/16-18 x 2” Hex Head Cap, Grade 5 (2)
WASHER, 13/32” I.D. x 3/4 O.D. Poly (4)
NUT, 5/16-18 Hex Head Center Lock, Grade B (2)
SCREW, 1/2-13 x 1” Hex Head Cap, Grade 5 (2)
NUT, 1/2-13 Hex Head Center Lock, Grade 5 (2)
SCREW, 5/16-18 x 1” Slotted Pan Head
HOLDER, Beverage
**
2-7174
3-5797
9-1067
9-0646
9-0975
9-0683
4-2968
4-4902
4-4903
9-1919
4-4904
9-1303
SPACER, Cup Holder
COVER, Cup Holder
RIVET, 3/16” Pan Head (3)
BRACKET, Armrest Cup Holder
BOLT, 5/16-18 x 1” Short Neck Carriage, Grade 5 (6)
**NOTE: Not a Part Sales item.
Refer to pages 26 & 27 for Seat Support Components.
MID MOUNT Z-RIDER
MANUAL No. 06110
45
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT ASSEMBLY (MZM Models)
2
4
4
5
3
3
8
5
6
9
5
7
1
12
12
10
ASSEMBLY (for components
See Seat Support Assembly pages)
10
11
11
ITEM PART NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
11
12
13
4-7036
4-4897
7-2401
4-4855
9-1523
7-2106
9-1800
9-1298
2-6292
1-9348
1-9109
9-1151
9-1296
ASSEMBLY, Seat Support
SEAT, Milco High Back
BRACKET, Armrest (Painted) (2)
ARM REST (2)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap (4)
LATCH, Seat Support
BOLT, 5/16-18 Shoulder w/ Nylon Patch
NUT, 5/16-18 Nyloc
SPRING, Extension
CLIP, Seat Cushion (2)
COVER, Spring (Rubber) (2)
SCREW, 5/16-18 x 1-1/4” Hex Washer Self-Tap (3)
WASHER, 11/32 I.D. x 11/16 O.D. (2)
MANUAL No. 06110
MID MOUNT Z-RIDER
46
Download from Www.Somanuals.com. All Manuals Search And Download.
TRACTION DRIVE IDLER ASSEMBLY
5
4
12
7
15
9
11
1
16
9
2
12
1
2
2
15
10
13
11
3
3
10
14
6
8
1
2
3
1-3324
1-4409
1-8573
1-9109
1-9348
9-1804
4-4765
3-5812
3-5816
4-2622
9-1299
9-1518
9-1553
9-1560
9-1598
4-4760
FITTING, 3/16 Lube (2)
BUSHING, 9/16 I.D., 3/4” O.D. (4)
PULLEY, Idler 3.48 O.D. (2)
COVER, Spring (Rubber) (2)
CLIP, Seat Cushion (2)
WASHER, 9/16 Flat (Type B) (4)
SPRING, Torsion
SPACER, 3/8 I.D. 5/8 O.D. x 5/8” Long
PIN, 3/8-24 (2)
IDLER ARM (Weldment) (2)
NUT, 3/8-16 Hex Nyloc (2)
NUT, 3/8-24 Hex Nyloc (2)
4
5
6
7
8
9
10
11
12
13
14
15
16
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5
SCREW, 3/8-16 x 2-1/4” Hex Head Cap, Grade 5
COTTER PIN, 1/8 x 3/4” (2)
SPRING, Torsion
MID MOUNT Z-RIDER
MANUAL No. 06110
47
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
DECALS
5
6
3
7
4
8
9
ITEM
PART NO.
3-5847
3-5848
7-3603
7-3604
4-4757
4-6425
4-5122
2-9470
7-2444
4-5108
2-4156
3-5846
DESCRIPTION
1
2
LOGO, Side 24.5” Long
LOGO, Front 16.33” Long
3
DECAL, Control Panel (MZM Models)
DECAL, Control Panel
10
4
--
--
5
DECAL, Control Panel (not shown)
DECAL, Control Panel (not shown)
DECAL, Pro Cruiser
6
DECAL, Patent Numbers
DECAL, Twin Stick Control
DECAL, Tank Selector
7
8
9
DECAL, Caution
10
DECAL, Fuse
]
MANUAL No. 06110
MID MOUNT Z-RIDER
48
Download from Www.Somanuals.com. All Manuals Search And Download.
DECALS
12
13
19
11
14
16
15
ITEM
11
--
PART NO.
DESCRIPTION
17
7-3601
7-2446
7-3647
4-4640
1-3010
2-2522
4-5107
4-4793
4-4794
7-1916
DECAL, Throttle/Choke
DECAL, Throttle/Choke Twin Stick (not shown)
DECAL, Danger Guard/Catcher
DECAL, Nameplate Snapper
DECAL, Warning (Cut-Finger)
DECAL, Warning
12
13
14
15
16
17
18
19
DECAL, Park Brake
DECAL, Deck Size (52” only)
DECAL, Deck Size (61” only)
DECAL, Snapper (3D)
18
MID MOUNT Z-RIDER
MANUAL No. 06110
49
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL COMPONENTS (except wiring)
RED
(NEGATIVE)
8
6
7
9
BLACK
(POSITIVE)
10
5
4
BLUE
ORANGE
(TO FUSE
BOX)
BLUE/WHITE
YELLOW
(JUMPER)
12
3
13
YELLOW
ORANGE
2
1
YELLOW
BLUE (S)
16
GREEN
(NEGATIVE)
BLUE/WHITE
11
WHITE
ORANGE
(POSITIVE)
14
PURPLE (M)
ORANGE (L)
RED (B)
15
19
17
GREEN (G)
PINK
24
BLUE/WHITE
ORANGE
ORANGE
(POSITIVE)
22
21
PURPLE
BROWN
(NEGATIVE)
25
23
28
26
31
32
27
22
30
23
20
18
50
29
MANUAL No. 06110
MID MOUNT Z-RIDER
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL COMPONENTS (except wiring)
ITEM
1
PART NO.
2-6343
1-6132
9-1546
1-2685
2-3506
1-1138
2-3355
9-1240
9-0376
1-9547
3-5658
1-5277
9-0927
9-0926
9-0925
3-5659
7-9208
3-2296
2-3354
3-5610
9-0072
9-1294
9-0372
2-2366
9-1568
9-1304
1-2080
1-8829
3-5550
3-5661
9-1320
3-5638
9-1523
9-0585
DESCRIPTION
SWITCH, Ignition- After Fire Solenoid
SPACER, 5/8”
2
3
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
4
5
BEZEL
6
KEY, and Ring
7
SWITCH, DPDT
8
SCREW, #10-32 x 5/8” Hex Machine, Grade. 5 (2)
NUT, #10-32 Hex Nyloc (2)
ASSEMBLY, Ammeter and Clamp
SWITCH, PTO
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
HOUR METER, D.C.
SCREW, #6-32 x 1/2” Round Head Machine (2)
WASHER, #6 Internal Tooth Lock (2)
NUT, #6-32 Hex (2)
SWITCH, Lights
BUZZER, Pulsing
BRACKET, Battery Hold Down (1/4-20 Thread)
SWITCH, Seat NC (see page 28, item 2)
BATTERY, 11 Plate- 375CCA
SCREW, 1/4-20 x 5/8”, Hex Head Cap Gr. 5 (2)
WASHER, 9/32 I.D. x 5/8 O.D. Flat (2)
NUT, 1/4-20 Hex Center Lock Grade B or 5 (2)
BRACKET, Battery
WING NUT, 1/4-20
SCREW, 3/8-16 Hex Head Cap, Grade 5
CABLE TIE, 7” (15)
HEAD LIGHT (2)
BEZEL, Headlight (2)
SPACER, PTO Switch
WASHER, 3/8” Split Lock
CLIP, 3/8” Open Cushioned (2)
SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap (Swage) (2)
NUT, 5/16-18 Hex Flange Lock, Grade 5
MID MOUNT Z-RIDER
MANUAL No. 06110
51
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING HARNESS
(Non-MZM Models)
TO STARTER
SOLENOID
TO NEG.
BATTERY
TERMINAL
TO PTO
TO CONTROL
PANEL
HARNESS
(GREEN WIRE)
4
TO STARTER
SOLENOID
3
TO ENGINE
TO GROUND
(ENGINE BASE)
TO
BATTERY
TO CONTROL
PANEL
HARNESS
(BLACK WIRE)
TO POS.
BATTERY
TERMINAL
TO L.H. LIGHT
1
FUSES
TO PTO SWITCH
TO LIGHT SWITCH
TO HOUR METER
TO SEAT
SWITCH
2
TO AMP METER
TO BUZZER
TO PARK
BRAKE
SWITCH
TO R.H. LIGHT
TO FRONT
HARNESS
TO IGNITION
SWITCH
TO CONSOLE
HARNESS
ITEM
PART NO.
DESCRIPTION
1
2
3
4
4-4912
4-4913
3-5607
3-5609
HARNESS, Control Panel
HARNESS, Front
CABLE, Battery- Positive (6 Ga., 47”)
CABLE, Battery- Negative (6 Ga., 38”)
MANUAL No. 06110
MID MOUNT Z-RIDER
52
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING SCHEMATIC
(Non-MZM Models)
MID MOUNT Z-RIDER
MANUAL No. 06110
53
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING HARNESS
(MZM Models)
TO STARTER
SOLENOID
TO NEG.
BATTERY
TERMINAL
TO PTO
TO CONTROL
PANEL
HARNESS
(GREEN WIRE)
4
3
TO STARTER
SOLENOID
TO ENGINE
TO GROUND
(ENGINE BASE)
TO
BATTERY
TO CONTROL
PANEL
HARNESS
(BLACK WIRE)
TO POS.
BATTERY
TERMINAL
1
FUSES
TO PTO SWITCH
TO SEAT
SWITCH
TO HOUR METER
TO PARK
BRAKE
SWITCH
2
TO FRONT
HARNESS
TO IGNITION
SWITCH
TO CONSOLE
HARNESS
ITEM
PART NO.
DESCRIPTION
1
2
3
4
4-6423
4-6422
3-5607
3-5609
HARNESS, Control Panel
HARNESS, Front
CABLE, Battery- Positive (6 Ga., 47”)
CABLE, Battery- Negative (6 Ga., 38”)
MANUAL No. 06110
MID MOUNT Z-RIDER
54
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING SCHEMATIC
(MZM Models)
MID MOUNT Z-RIDER
MANUAL No. 06110
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Manual for
TM
MID MOUNT Z-RIDER
ZERO TURNING HYDRO DRIVE
SERIES 0, 1, 2
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
MANUAL No. 06110
(Rev. 6, 09/25/02)
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|