Parts Manual for
MID MOUNT Z-RIDER
ZERO TURNING HYDRO DRIVE
NZM SERIES 0 & 1
MODEL
NZM19480KWV
NZM19481KWV
NZM21520KWV
NZM21521KWV
NZM25611KWV
NZM27611KH
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No.
7006930
Revision 4, 1/18/2006
TP 400-5017-4-NZ-N
Table Of Contents
PAGE
4
GROUP
CASTER WHEEL ASSEMBLY
DRIVE TIRE & WHEEL ASSEMBLY
FRONT FRAME ASSEMBLY PT.1
FRONT FRAME ASSEMBLY PT.2
REAR FRAME & TANK BRACKETS
FUEL TANK ASSEMBLY
6
8
12
14
16
18
20
24
28
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
62
64
66
68
70
72
74
76
78
80
82
84
86
88
MUFFLER GUARD ASSEMBLY
TWIN STICK CONTROL ASSEMBLY PT.1
TWIN STICK CONTROL ASSEMBLY PT.2
PARKING BRAKE ASSEMBLY
HYDRO PUMP ASSEMBLIES
HYDRO PUMP LINKAGE
HOSE ASSEMBLY (Series 0) PT.1
HOSE ASSEMBLY (Series 0) PT.2
HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.1
HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.2
HOSE ASSEMBLY (61" DECK, SERIES 1) PT.1
HOSE ASSEMBLY (61" DECK, SERIES 1) PT.2
HYDRO RESERVOIR ASSEMBLY
HYDRO IDLER ASSEMBLY
SEAT ASSEMBLY (SERIES 0)
SEAT ASSEMBLY (SERIES 1)
ENGINE SUB-ASSEMBLY
CONTROL PANEL ASSEMBLY
48" CUTTING DECK ASSEMBLY PT.1
48" CUTTING DECK ASSEMBLY PT.2
52" CUTTING DECK ASSEMBLY PT.1
52" CUTTING DECK ASSEMBLY PT.2
61" CUTTING DECK ASSEMBLY PT.1
61" CUTTING DECK ASSEMBLY PT.2
IDLER ASSEMBLIES (58885)
DECK SPINDLE ASSEMBLIES
DECALS
DECALS (continued)
ELECTRICAL COMPONENTS (except wiring) PT.1
ELECTRICAL COMPONENTS (except wiring) PT.2
WIRING HARNESS (Kawasaki engines)
WIRING HARNESS (Kohler Engines)
WIRING SCHEMATIC (Kawasaki engines)
WIRING SCHEMATIC (Kohler Engines)
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
3
CASTER WHEEL ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
4
CASTER WHEEL ASSEMBLY
Item Part No
7058744
1A 7075398
7091773
2A 7092094
Qty Description
Note
1
2
2
1
2
1
1
1
2
2
1
1
1
1
2
1
1
WELDMENT, Caster Yoke
WELDMENT, Caster Yoke, 7-1/4” Wide
SCREW, 1/2-13 x 7” Hex Head Cap, GR5
SCREW, 1/2-13 x 9-1/2” Hex Head Cap, GR5
NUT,1/2-13 Nyloc
used on 61” Deck Model only
used on 61” Deck Model only
2
3
4
7091325
7035476
SPACER, Bearing, 5.29” Long
SPACER, Bearing, 7.29” Long
ASSY, Tire & Wheel (Incl. items 6 thru 10)
ASSY, Tire & Wheel (Incl. items 6A, 7A, 8, 9A & 10)
WELDMENT, Wheel Hub & Rim
WELDMENT, Wheel Hub & Rim
TIRE, 13 x 5.06 4 Ply Slick
4A 7075462
7053496
5A 7075461
7075335
6A 7075460
7074791
7A 7075463
used on 61” Deck Model only
used on 61” Deck Model only
used on 61” Deck Model only
used on 61” Deck Model only
5
6
7
TIRE, 13 x 6.5-6 4 Ply Slick
8
9
7028722
7076998
BEARING, .750 Heim
FITTING, Lube
9A 7076998
FITTING, Lube, 1/4-28 Thread
Was 12700, used on 61” Deck
Model only
10 7012234
1
VALVE STEM, Air
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
5
DRIVE TIRE & WHEEL ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
6
DRIVE TIRE & WHEEL ASSEMBLY
Item Part No
Qty Description
Note
1
7059161
7075473
2
2
ASSEMBLY, Rear Tire & Rim (Incl. Items 2, 3 & 4)
--
ASSEMBLY, Rear Tire & Rim (Incl. Items 2, 3 & 4)
NOTE: These items are used on
61” deck models only.
2
7074157
7075478
1
1
TIRE, 23 x 10.5 - 12 NHS 4PR Kenda “Super Turf” 4 Ply
TIRE, 24 x 12.00 - 12 Kenda “Super Turf” 4 Ply
--
NOTE: These items are used on
61” deck models only.
3
--
4
5
6
7
8
9
7075336
7075474
7012234
7092073
7074179
7091793
7013861
7091828
1
1
RIM, 12” Diameter x 7.00”
RIM, 12” Diameter x 8.5”
VALVE, Air
1
10
2
NUT, 1/2-20NF Lug
DRUM, BRAKE/WHEEL, HAYES (no lip on back)
PIN, 9/64 x 1-1/2” Cotter
KEY, 3/16 x 7/8" Woodruff
NUT, 3/4-20 Slotted Hex
included as part of wheel motor
included as part of wheel motor
included as part of wheel motor
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
7
FRONT FRAME ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
8
FRONT FRAME ASSEMBLY PT.1
Item Part No
Qty Description
Note
1
--
2
3
4
7058032
7044821
--
1
1
2
2
4
WELDMENT, Front Frame
WELDMENT, Front Frame
used on 61” Deck Model only
GROUP, Front Wheel (see Caster Wheel Assembly Page)
GREASE SEAL
7074723
7058554
BEARING, Tapered Roller
comprised of 74706 (tapered
roller brg.) and 74707 (inner
race)
5
7029137
7092083
7090841
7074537
7090768
7091325
7073326
7041818
7044860
7091299
7035667
7074777
7074580
7058446
7091501
7074657
7091640
7074716
7010935
7010746
7074776
--
2
2
SPACER, Jackstaff
6
CASTLE NUT, 1-1/ UNF, GR B
ROLL PIN, 3/16 x 1-1/2”
7
2
8
2
CAP, 3-1/2” Fuel
9
12
12
2
BOLT, 1/2-13 x 1-1/2” Square Neck Carriage GR5
NUT, 1/2-13 Hex Nyloc
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
BUSHING, Teflon
3
PAD, Floor Pan
1
EYEBOLT, 3/8-16 x 3”
9
NUT, 3/8-16 Hex Nyloc
1
SPRING, Extension, Lift Assist
SPACER, Lift Adjust (1.08” Long)
SPACER, Lift Adjust (1.43” Long)
WELDMENT, Height Adjust
SCREW, 3/8-16 x 2-1/2” Hex Head Cap, GR5
BRACKET, Deck Lift Detent
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
CLIP, Roll Pin, 1/2”
1
2
1
3
1
1
1
1
WASHER, .77 I.D. Flat
1
RING, 3/4” External Retaining
FLOORPAN
1
ASSY, Deck Lift Handle (Incl. indented items below)
RING, .375” Diameter External Retaining
LUBE FITTING, 3/16” (or 76998, 1/4-28 Straight Lube Fitting)
7012313
7014669
1
1
or 76998, 1/4-28 Straight Lube
Fitting
29
30
31
32
33
34
35
36
7058901
7072450
7074531
7074532
7074533
7090209
7091597
7091575
1
1
1
1
2
2
1
2
WELDMENT, Deck Lift Handle
SPRING, Neutral Return
BRACKET, Handle Support
ROD, Latch
STOP, Latch
SCREW, 5/16-18 x 1” Hex Head Cap, GR2
PIN, 3/32 x 1/2” Cotter
NUT, 5/16-18 Hex Center Lock
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
9
FRONT FRAME ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
10
FRONT FRAME ASSEMBLY PT.1
Item Part No
Qty Description
Note
37
38
55
56
57
58
7090122
7075330
7012117
7076986
7075027
7075028
1
1
1
1
1
1
WASHER, 3/8” Flat SAE
COVER, Plastic
BUSHING, 3/8 Plastic
ROLLPIN,1/8 x 7/8”
MAT, Footpan
MAT, Floor Pan
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
11
FRONT FRAME ASSEMBLY PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
12
FRONT FRAME ASSEMBLY PT.2
Item Part No
Qty Description
ASSY, Deck Lift Handle
Note
26
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
59
60
61
62
63
--
7043803
7044858
7044870
7058148
7058181
7058182
7059173
7074579
7074698
7091544
7090543
7090848
7091516
7091587
7091894
7090188
7091303
7091298
7012802
7091803
7053562
2
1
2
1
1
1
BRACKET, Deck Support
SWIVEL, Timing Rod (1/2-13 External Thread)
SHIM PLATE
WELDMENT, Rear Lift
WELDMENT, Front Deck Lift
WELDMENT, Bellcrank Lift
CHAIN, 3 Links
qty. 2 on 52” deck; 4 on 61” deck
1
1
ROD, Timing (1/2-13 Thread)
LINK, Front
10
4
NUT, 1/2-13 Hex Flange GR5
SCREW, 1/2-13 x 2” Hex Head Cap, GR5
SET SCREW, 5/16-18 Square Head Cup Point
PIN, 5/32 x 1” Cotter
2
3
4
WASHER, .531 I.D. Flat
3
NUT, 1/2-13 Hex Center Lock, GR5
WASHER, 5/16” Flat
4
4
BOLT, 5/16-18 x 1” Short Neck Carriage, GR5
NUT, 5/16-18 Hex Nyloc
4
3
PIN, 1/2 x 1-1/8” Clevis
1
KEY, 3/16” Square x 1-1/2”
ASSEMBLY, Chain & Eyebolt
2
used on 52” Deck Model only
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
13
REAR FRAME & TANK BRACKETS
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
14
REAR FRAME & TANK BRACKETS
Item Part No
Qty Description
Note
1A 7059083
1B 7044846
1
1
WELDMENT, Rear Frame
used on Series 0
WELDMENT, Rear Frame
used on Series 1 except for 61”
Model
1C 7044816
1
1
WELDMENT, Rear Frame
used on Series 1, 61” Deck
Models
2
3
7053476
7053518
7091640
7091299
7090122
7035638
WELDMENT, Left Hand Fuel Tank Bracket
WELDMENT, Right Hand Fuel Tank Bracket
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
NUT, 3/8-16 Hex Nyloc
also shown on Fuel Tank
Assembly page
1
also shown on Fuel Tank
Assembly page
4
10
10
4
also shown on Fuel Tank
Assembly page
5
also shown on Fuel Tank
Assembly page
6
WASHER, 3/8” Flat
also shown on Fuel Tank
Assembly page
21
5
CLIP, Open 3/8” Cushioned
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
15
FUEL TANK ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
16
FUEL TANK ASSEMBLY
Item Part No
Qty Description
Note
2
3
7053476
7053518
7091640
7091299
7090122
7074566
7074565
7075135
7074687
7029900
7074688
7074689
7074690
7044681
7092089
7012337
7049999
7074835
7075106
7090250
7091917
1
1
10
4
4
1
1
2
2
6
1
1
1
1
6
2
2
WELDMENT, Left Hand Fuel Tank Bracket
WELDMENT, Right Hand Fuel Tank Bracket
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
NUT, 3/8-16 Hex Nyloc
4
5
6
WASHER, 3/8” Flat
7
ASSEMBLY, Fuel Tank, Left Hand
ASSEMBLY, Fuel Tank, Right Hand
CAP, 3-1/2” Fuel
8
9
10
11
12
13
14
15
16
17
18
19
20
22
23
BRACKET, Valve Mount
CLAMP, 7/16” Fuel Hose
HOSE, 1/4” I.D. x 3'-7.5” Long Fuel (R.H.)
HOSE, 1/4” I.D. x 1'-8” Long Fuel (L.H.)
HOSE, 1/4” I.D. x 1' Long Fuel
ASSEMBLY, 3-Way Fuel Valve
SCREW, 7/16-14 x 2” Hex Head Cap, GR5
GROMMET
ASSEMBLY, Fuel Pickup (Incl. 74835 & 75106, one each)
ELBOW, 90 Degree
DIP TUBE
12
6
WASHER, 1/2” Flat SAE
NUT, 7/16-14 Hex Nyloc
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
17
MUFFLER GUARD ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
18
MUFFLER GUARD ASSEMBLY
Item Part No
Qty Description
Note
1
2
3
4
5
6
7
8
9
7074691
7074692
7074693
7074785
7075073
7091299
7091640
7091923
7091585
2
2
UPPER BRACKET, Muffler Guard
MOUNT, Lower Muffler Guard
GUARD, Muffler (Back Plate)
REAR BRACE, Muffler Guard
GUARD, Muffler
1
1
1
17
18
2
NUT, 3/8-16 Nyloc
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
BOLT, 3/8-16 x 3/4” Square Neck Carriage
NUT, 3/8-16 Hex Center Lock
3
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
19
TWIN STICK CONTROL ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
20
TWIN STICK CONTROL ASSEMBLY PT.1
Item Part No
Qty Description
Note
1
7074671
7090361
7074670
7074669
7059101
7091305
7091299
7079577
7091603
7092018
7091628
7072934
7074164
7073994
7074910
7074672
7090188
7059123
7092091
7075031
7059171
7074016
7010739
7073061
7027230
7091294
7074186
7059117
7090669
7091298
7091813
7074661
7072212
7075026
7074964
7090848
7092010
1
42
2
LIMITER BRACKET, Right Hand Outside
2
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
LIMITER BRACKET, Rear
3
4
1
LIMITER BRACKET, Right Hand
WELDMENT, Mounting Hub
5
2
6
2
SCREW, 3/8-16 x 2” Hex Head Cap GR5
NUT, 3/8-16 Hex Nyloc
7
2
8
2
SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR5
NUT, 1/4-20 Hex Nyloc
9
14
2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SET SCREW, 5/16-18 Square Head w/Patch
WASHER, .64 I.D. x .99 O.D. x .05 Flat
BUSHING, Teflon Impregnated
BUSHING MOUNT PLATE, Right Hand
CROSSROD
4
4
1
2
2
KEY, 3/16” Square x 7/8” Long
BRACKET, Dampener Frame
2
10
2
WASHER, 5/16” Flat
WELDMENT, Bellcrank, Pump Control
GROOVE PIN, 1/4 x 1-1/4” long
CYLINDER, Dampener
4
2
2
WELDMENT, Bellcrank Dampener Control
CHANNEL, Mounting
1
2
RING, 5/8” External Retaining
2
MOUNTING PLATE, Left Hand Bearing
SCREW, 1/4-20 x 1” Hex Head Cap GR5
WASHER, .28 I.D. x .63 O.D. x .06 Thick Flat
MOUNTING ARM
4
12
2
1
WELDMENT, R.H. Adjustable Handlebar Attachment
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR5
NUT, 5/16-18 Hex Nyloc
4
4
4
SCREW, 1/4-20 x 1-3/4” Hex Head Cap, GR5
HANDLEBAR
2
one per side
one per side
2
GRIP, Twin Stick
2
SPACER
1
BRACKET, Speed Control
1
SET SCREW, 5/16-18 x 1/2” Square Head Cup Point w/patch
SCREW, 1/4-20 Shoulder Socket Head
1
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
21
TWIN STICK CONTROL ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
22
TWIN STICK CONTROL ASSEMBLY PT.1
Item Part No
Qty Description
Note
38
39
40
41
7075029
7091841
7091814
7090372
1
1
1
2
SPACER, .498 O.D. x 1.010” long
SCREW, 5/16-18 x 1” Hex Washer Self-Tap
SCREW, 1/4-20 x 1-1/4” Hex Head Cap
NUT, 1/4-20 Hex Center Lock
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
23
TWIN STICK CONTROL ASSEMBLY PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
24
TWIN STICK CONTROL ASSEMBLY PT.2
Item Part No
Qty Description
Note
1
7074671
7090361
7074670
7075026
7059101
7091305
7091299
7079577
7091603
7092018
7091628
7072934
7074964
7073994
7074910
7074672
7090188
7059123
7092091
7075031
7059171
7074016
7010739
7073061
7027230
7091294
7074186
7044814
7090669
7091298
7091813
7074661
7072212
7074808
7074668
7074017
7090848
1
42
2
LIMITER BRACKET, Right Hand Outside
not shown, see previous page
2
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
LIMITER BRACKET, Rear
3
4
1
SPACER
5
2
WELDMENT, Mounting Hub
6
2
SCREW, 3/8-16 x 2” Hex Head Cap GR5
NUT, 3/8-16 Hex Nyloc
7
2
8
2
SCREW, 1/4-20 x 1-1/2” Hex Head Cap GR5
NUT, 1/4-20 Hex Nyloc
9
14
2
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SET SCREW, 5/16-18 Square Head w/Patch
WASHER, .64 I.D. x .99 O.D. x .05 Flat
BUSHING, Teflon Impregnated
BRACKET, Speed Control
4
4
1
2
CROSSROD
2
KEY, 3/16” Square x 7/8” Long
BRACKET, Dampener Frame
2
10
2
WASHER, 5/16” Flat
WELDMENT, Bellcrank, Pump Control
GROOVE PIN, 1/4 x 1-1/4” long
CYLINDER, Dampener
4
2
2
WELDMENT, Bellcrank Dampener Control
CHANNEL, Mounting
1
2
RING, 5/8” External Retaining
2
MOUNTING PLATE, Left Hand Bearing
SCREW, 1/4-20 x 1” Hex Head Cap GR5
WASHER, .28 I.D. x .63 O.D. x .06 Thick Flat
MOUNTING ARM
4
12
2
1
WELDMENT, L.H. Adjustable Handlebar Attachment
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR5
NUT, 5/16-18 Hex Nyloc
4
4
4
SCREW, 1/4-20 x 1-3/4” Hex Head Cap, GR5
HANDLEBAR
2
one per side
one per side
2
GRIP, Twin Stick
1
LIMITER BRACKET, Left Hand Outside
LIMITER BRACKET, Left Hand
BUSHING MOUNTING PLATE, Left Hand
SET SCREW, 5/16-18 x 1/2” Square Head Cup Point w/patch
1
1
1
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
25
TWIN STICK CONTROL ASSEMBLY PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
26
TWIN STICK CONTROL ASSEMBLY PT.2
Item Part No
Qty Description
Note
38
39
40
41
42
7092010
7075029
7091841
7091814
7090372
1
1
1
1
2
SCREW, 1/4-20 Shoulder Socket Head
SPACER, .498 O.D. x 1.010” long
SCREW, 5/16-18 x 1” Hex Washer Self-Tap
SCREW, 1/4-20 x 1-1/4” Hex Head Cap
NUT, 1/4-20 Hex Center Lock
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
27
PARKING BRAKE ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
28
PARKING BRAKE ASSEMBLY
Item Part No
Qty Description
Note
1
2
3
4
5
6
7010739
7092091
7091593
7024586
7046451
7046782
3
1
8
2
2
2
RING, 5/8” External Retaining
GROOVE PIN, 1/4 x 1-1/4”
PIN, 3/8” Self Locking Cotter
SWIVEL, Brake Link-PM
SWIVEL, Adjustable
SPRING, Rectangular Wire Die, Blue
or 35915, SPRING, Neutral
Return Adjust
7
7059084
7059085
7059086
7059087
7059176
7059181
7072934
7073989
7073990
7074196
7090122
7090482
7091298
7091508
7091628
1
1
2
2
1
1
6
2
2
1
2
4
6
6
6
WELDMENT, Brake Rod Crossrod
WELDMENT, Park Brake Handle
WELDMENT, Brake Linkage Pivot
WELDMENT, Brake Linkage Bellcrank
PACKAGE, Left Hand Disc Brake
PACKAGE, Right Hand Disc Brake
BUSHING, Teflon Impregnated
LINKAGE, Park Brake, Front (3/8-24 thread)
LINKAGE, Park Brake, Rear (3/8-24 thread)
GRIP, Parking Brake
8
9
10
11
12
13
14
15
16
17
18
19
20
21
WASHER, 3/8” Flat
NUT, 3/8-24 Hex Jam
NUT, 5/16-18 Hex Nyloc
BOLT, 5/16-18 x 3/4” Short Neck Carriage GR5
WASHER, .64 I.D. Flat
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
29
HYDRO PUMP ASSEMBLIES
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
30
HYDRO PUMP ASSEMBLIES
Item Part No
Qty Description
Note
1
--
7075709
7075709
7075710
7075710
7059089
7075624
7027199
7091829
7091627
7027223
7091835
7074738
1
1
1
PUMP, Hydro-Gear (BDP-10A-314) Left Hand
Was 74736 (used on Series 0)
used on Series 1
PUMP, Hydro-Gear (BDP-10A-331) Left Hand
PUMP, Hydro-Gear (BDP-10A-424) Right Hand
PUMP, Hydro-Gear (BDP-10A-454) Right Hand
PULLEY, Hydro Drive Pump
2
Was 74737 (used on Series 0)
used on Series 1
--
7
2
2
2
4
2
2
2
2
used on Series 0
--
PULLEY, Hydro Drive Pump
used on Series 1
8
KEY, M5 x M20
9
SCREW, 1/4-20 x 1/2” Square Head Set w/Patch Lock
WASHER, .281 x 1.00 x .125 Flat
WASHER, 1/4” Split Lock
10
11
12
13
SCREW, M6 1.0 x 12mm Hex Head Cap
HUB KIT for BDP-10A Pump w/Thru Shaft (Incl. indented items
below)
--
--
--
HUB, Fan Mount
--
WASHER, Belleville, Fan Mount
NUT, Hex Nyloc
--
--
14
15
16
17
18
7074968
7027181
7013847
7090122
7091299
2
4
4
4
4
FAN, 7” Nylon, Counter-Clockwise
BOLT, 3/8-16 x 1-1/4” Short Neck Carriage GR5
RETAINER, 3/8” Bolt
WASHER, 3/8” Flat
NUT, 3/8-16 Hex Nyloc
or 76979 (3/8-16 Hex Nyloc Nut)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
31
HYDRO PUMP LINKAGE
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
32
HYDRO PUMP LINKAGE
Item Part No
Qty Description
Note
3
4
--
2
1
ASSY, Pump Control Linkage (Incl. indented items below)
LINKAGE ROD, Pump Control (5/16-24 thread- both ends)
NUT, 5/16-24 Hex GR5 (2 per assembly)
LINKAGE (2 per assembly)
7073995
7091297
7027139
7091527
7090188
7091298
5
2
6
2
19
20
21
4
SCREW, 5/16-18 x 1-1/4” Hex Head Cap GR5
WASHER, 5/16” Flat
12
4
NUT, 5/16-18-3B Hex Nyloc
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
33
HOSE ASSEMBLY (Series 0) PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
34
HOSE ASSEMBLY (Series 0) PT.1
Item Part No
Qty Description
Note
1
2
3
4
5
7059112
7027200
7027164
7090815
7074161
2
2
2
2
2
MOUNT, Oil Filter
Includes Filter Item #3
FITTING, Straight 1-12 UNF Thread
FILTER, Oil
Nelson P/N 85437-D
SCREW, 3/8-16 x 3/4” Hex Washer Self-Tap
MOTOR, Hydraulic
(Includes 13861, #11 Woodruff
Key; & 92093, Patched Hex Nut)
6
7092087
7091322
7091316
7073996
7090768
7091325
7059091
7075058
7075059
7075049
7075050
7075051
7075054
7075056
7075057
7075055
7090793
8
8
8
2
6
6
1
2
2
2
1
1
2
2
2
4
6
BOLT, 1/2-13 x 6” Hex Head Cap GR5
7
WASHER, 1/2” Split Lock
8
NUT, 1/2-13 Hex GR B
9
PLATE, Mounting
10
11
12
13
14
15
16
17
21
22
23
24
25
BOLT, 1/2-13 x 1-1/2” Square Neck Carriage GR5
NUT, 1/2-13 Hex Nyloc
WELDMENT, Rear Crossbrace
CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S)
CONNECTOR, 90 Degree Hydraulic (Parker # 8-10 C5OLO-S)
HOSE, 13-3/4” Hydraulic (Parker # F436BKJCJC080808-13-75)
HOSE, 19-1/2” Hydraulic (Parker # F436BKJCJ5080808-19.5)
HOSE, 17-1/2” Hydraulic (Parker # F436BKJCJ5080808-17.5)
HOSE, 6-1/2” (Parker # R836BKJ9NR080008-6.5
CONNECTOR, 90 Degree Hydraulic (Parker # 8-6 C5OLO-S
CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S)
CONNECTOR, 45 Degree Hydraulic (Parker # V5OLO-S)
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
35
HOSE ASSEMBLY (Series 0) PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
36
HOSE ASSEMBLY (Series 0) PT.2
Item Part No
Qty Description
Note
1
7075445
7075060
7075052
7075053
MOUNT, Oil Filter
also shown in previous group
18
19
20
4
2
2
CONNECTOR, 90 Degree Hydraulic (Parker # 8 C5OLO-S)
HOSE, 18-1/2” (Parker R836BKJCJ9090808-18.5)
HOSE, 12-1/4” (Parker # R836BKJ9NR080008-12.5)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
37
HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
38
HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.1
Item Part No
Qty Description
Note
1
2
3
4
7059112
7027200
7027164
7090815
2
2
2
2
1
MOUNT, Oil Filter
Includes Filter Item #3
FITTING, Straight 1-12 UNF Thread
FILTER, Oil
Nelson P/N 85437-D
SCREW, 3/8-16 x 3/4” Hex Washer Self-Tap
MOTOR, Hydraulic, Left Hand
5A 7075637
Includes Castle Nut & #502
Woodruff Key, 5/16 x 1”
5B 7075638
1
MOTOR, Hydraulic, Right Hand
Includes Castle Nut & #502
Woodruff Key, 5/16 x 1”
6
7092087
7091322
7091316
7073996
7090768
7091325
7059091
7075058
7075059
7075049
7091793
7075051
7075054
7075056
7075057
7075055
7090793
8
8
8
2
6
6
1
2
2
2
2
2
2
2
2
4
6
BOLT, 1/2-13 x 6” Hex Head Cap GR5
7
WASHER, 1/2” Split Lock
8
NUT, 1/2-13 Hex GR B
9
PLATE, Mounting
10
11
12
13
14
15
16
17
21
22
23
24
25
BOLT, 1/2-13 x 1-1/2” Square Neck Carriage GR5
NUT, 1/2-13 Hex Nyloc
WELDMENT, Rear Crossbrace
CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S)
CONNECTOR, 90 Degree Hydraulic (Parker # 8-10 C5OLO-S)
HOSE, 13-3/4” Hydraulic (Parker # F436BKJCJC080808-13-75)
PIN, 9/64 x 1-1/2” Cotter
HOSE, 17-1/2” Hydraulic (Parker # F436BKJCJ5080808-17.5)
HOSE, 6-1/2” (Parker # R836BKJ9NR080008-6.5
CONNECTOR, 90 Degree Hydraulic (Parker # 8-6 C5OLO-S
CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S)
CONNECTOR, 45 Degree Hydraulic (Parker # V5OLO-S)
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
39
HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
40
HOSE ASSEMBLY (48" & 52" DECK, SERIES 1) PT.2
Item Part No
Qty Description
Note
1
7075445
7075060
7075052
7075053
MOUNT, Oil Filter
also shown in previous group
18
19
20
4
2
2
CONNECTOR, 90 Degree Hydraulic (Parker # 8 C5OLO-S)
HOSE, 18-1/2” (Parker R836BKJCJ9090808-18.5)
HOSE, 12-1/4” (Parker # R836BKJ9NR080008-12.5)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
41
HOSE ASSEMBLY (61" DECK, SERIES 1) PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
42
HOSE ASSEMBLY (61" DECK, SERIES 1) PT.1
Item Part No
Qty Description
Note
1
2
3
4
7059112
7027200
7027164
7090815
2
2
2
2
1
MOUNT, Oil Filter
Includes Filter Item #3
FITTING, Straight 1-12 UNF Thread
FILTER, Oil
Nelson P/N 85437-D
SCREW, 3/8-16 x 3/4” Hex Washer Self-Tap
MOTOR, Hydraulic, Left Hand
5A 7075637
Includes Castle Nut & #502
Woodruff Key, 5/16 x 1”
5B 7075638
1
MOTOR, Hydraulic, Right Hand
Includes Castle Nut & #502
Woodruff Key, 5/16 x 1”
6
7092087
7091322
7091316
7075443
7090768
7091325
7059091
7075058
7029355
7075470
7075050
7075051
7075054
7075056
7075057
7075055
7090793
7091793
4
8
8
2
6
6
1
2
4
2
1
2
2
2
2
4
6
2
BOLT, 1/2-13 x 6” Hex Head Cap GR5
7
WASHER, 1/2” Split Lock
8
NUT, 1/2-13 Hex GR B
9
PLATE, Mounting
10
11
12
13
14
15
16
17
21
22
23
24
25
26
BOLT, 1/2-13 x 1-1/2” Square Neck Carriage GR5
NUT, 1/2-13 Hex Nyloc
WELDMENT, Rear Crossbrace
CONNECTOR, Straight Hydraulic (Parker # 8-10 F5OLO-S)
BOLT, 1/2-13 x 3-3/4” Hex Head Cap
HOSE, 15-1/2” Hydraulic (Parker # F436JCJ9080808-15.50)
HOSE, 19-1/2” (Parker # F436BKJCJ5080808-19.5)
HOSE, 17-1/2” Hydraulic (Parker # F436BKJCJ5080808-17.5)
HOSE, 6-1/2” (Parker # R836BKJ9NR080008-6.5
CONNECTOR, 90 Degree Hydraulic (Parker # 8-6 C5OLO-S
CONNECTOR, Straight Hydraulic (Parker # 8-6 F5OLO-S)
CONNECTOR, 45 Degree Hydraulic (Parker # V5OLO-S)
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
PIN, 9/64 x 1-1/2” Cotter
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
43
HOSE ASSEMBLY (61" DECK, SERIES 1) PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
44
HOSE ASSEMBLY (61" DECK, SERIES 1) PT.2
Item Part No
Qty Description
Note
1
7075445
7075060
7075052
7075053
MOUNT, Oil Filter
also shown in previous group
18
19
20
4
2
2
CONNECTOR, 90 Degree Hydraulic (Parker # 8 C5OLO-S)
HOSE, 18-1/2” (Parker R836BKJCJ9090808-18.5)
HOSE, 12-1/4” (Parker # R836BKJ9NR080008-12.5)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
45
HYDRO RESERVOIR ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
46
HYDRO RESERVOIR ASSEMBLY
Item Part No
Qty Description
Note
1
7059088
2
ASSY, Hydraulic Tank (Incl. tank, p/n 74002 and indented items
below)
2
3
7075289
7075687
7073238
7073999
7074001
7027230
7091294
7090361
7091603
7012080
1
2
CAP, Vented (Kelck p/n H4550D)
GROMMET (was 12337)
4
2
FITTING, #8 Elbox
5
1
BRACKET, R.H. Hydro Tank Mount
BRACKET, L.H. Hydro Tank Mount
SCREW, 1/4-20 x 1” Hex Head Cap GR5 (or 27230)
WASHER, 1/4” Flat
6
1
7
8
Was 90548
8
16
4
9
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
NUT, 1/4-20 Hex Nyloc
10
11
8
5
CABLE TIE, 7” Long (not shown)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
47
HYDRO IDLER ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
48
HYDRO IDLER ASSEMBLY
Item Part No
Qty Description
Note
1
2
7014669
7014409
7035816
7018574
7059094
7073992
7075109
7075109
7091585
7091497
7091518
7091598
7091804
7091619
7075078
7028728
7028620
7091511
7091503
7090122
7091298
7091553
1
2
1
1
1
1
1
1
2
2
1
1
2
1
1
1
1
1
1
3
1
1
FITTING, 3/16” Straight Lube
BUSHING, 9/16” I.D.
3
PIN, Idler Arm (3/8-24 Thread)
PULLEY, Flat Idler 4.12” (Backside Idler)
WELDMENT, Idler Arm
4
5
6
SPRING, Extension
7
BELT, Hydro Drive (HA Section, 47.5 Effective Length)
BELT, Hydro Drive (5L Section, 47.5 Effective Length)
NUT, 3/8-16 Hex Center Lock
SCREW, 3/8-16 x 1-1/2 Hex Head Cap GR5
NUT, 3/8-24 Hex Nyloc
used on Series 0
--
Was 75626 (used on Series 1)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
PIN, 1/8 x 3/4” Cotter
WASHER, 9/16” Flat
NUT, 3/8-16 Hex Flange Lock
SWIVEL, Adjustable
ADJUSTER, Chain (5/16-18 Thread)
SPACER, .340 I.D. x .63 O.D. x .310 Thick
NUT, 5/16-18 Hex, GR5 or B
HAIR PIN, 3/32 x 1-1/2”
WASHER, 3/8” Flat SAE
NUT, 5/16-18 Hex Nyloc
SCREW, 3/8-16 x 1-3/4” Hex Head Cap GR5
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
49
SEAT ASSEMBLY (SERIES 0)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
50
SEAT ASSEMBLY (SERIES 0)
Item Part No
Qty Description
Note
--
7074771
1
SEAT ASSY (Milsco p/n S673074AB; order parts from 414-410- (Incl. angle brackets, seat pan,
3942)
cushions, flip-up armrests,
adjusters w/lock & seat switch)
1
2
7074218
7074328
7090122
7091299
7074674
7074673
7074675
7015761
7090951
7091640
7074740
7023341
7091909
7090361
7035638
7075304
7090188
7091298
7026292
7091541
7028620
7091530
7012485
7091584
2
2
2
6
1
1
1
2
2
6
1
2
2
6
1
1
4
5
1
1
1
1
1
1
SPRING, Compression- Seat Support
COVER, Seat Support Spring
WASHER, 3/8” Flat
3
4
NUT, 3/8-16 Nyloc
5
SEAT PAN
6
CROSSMEMBER, Seat
7
PIVOT BRACKET, Seat Hinge
SHOULDER BOLT, 5/16-18
NUT, 5/16-18 Large Flange Hex Center Lock
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
GUARD, Fan
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
KNOB, 1/4-20 x 3/4” Thread
WELL-NUT, 1/4-20 x 53/64”
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
CLIP, Open J 3/8 Cushioned
LATCH, Seat
WASHER, 5/16” Flat
NUT, 5/16-18 Hex Nyloc
SPRING, Extension
SCREW, 5/16-18 x 3/4” Hex Washer self-Tap
SPACER, .340 I.D.x .63 O.D. x .310 Thick
BOLT, 1/4-20 x 3/4” Short Neck Carriage, GR5
RETAINER, 1/4” Bolt
NUT, 1/4-20 Hex Flange Lock
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
51
SEAT ASSEMBLY (SERIES 1)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
52
SEAT ASSEMBLY (SERIES 1)
Item Part No
Qty Description
Note
--
--
7075417
7029338
1
1
SEAT ASSY(Ferris p/n 177516 order parts from Seats, Inc. 1-
800-767-3287)
(Incl. angle brackets, seat pan,
cushions, flip-up armrests,
adjusters w/lock & seat switch)
SEAT ASSY (Seats Inc. p/n 179035VD310 Silver/Black (not
shown)
used on NZM27611KH only
1
7074218
7091541
7090122
7091299
7075419
7074673
7058546
7015761
7090951
7091640
7074740
7023341
7091909
7090361
7035638
7075616
7090188
7091298
7026292
7027174
7028620
7022793
7022794
7036492
7071767
7033362
7023354
7073596
7075433
7026249
2
1
3
6
1
1
1
2
2
7
1
2
2
5
1
1
6
7
1
2
1
2
2
2
2
1
1
1
1
2
SPRING, Compression- Seat Support
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
WASHER, 3/8” Flat
2
Was 90368
3
4
NUT, 3/8-16 Nyloc
5
SEAT PAN
6
CROSSMEMBER, Seat
7
WELDMENT, Hinge Bracket
SHOULDER BOLT, 5/16-18
NUT, 5/16-18 Large Flange Hex Center Lock
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
GUARD, Fan
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
--
KNOB, 1/4-20 x 3/4” Thread
WELL-NUT, 1/4-20 x 53/64”
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
CLIP, Open J 3/8 Cushioned
LATCH, Seat
WASHER, 5/16” Flat
NUT, 5/16-18 Hex Nyloc
SPRING, Extension
SCREW, 5/16-18 x 2” Hex Head Cap GR5
SPACER, .340 I.D.x .63 O.D. x .310 Thick
BUSHING, Seat
SPACER
SPRING, Compression
SPRING, Compression
used on NZM27611KH only
used on NZM27611KH only
25
26
27
28
29
HOLDER, Seat Switch
SWITCH, Seat, NC
DECAL, Warning
DECAL, Oil Reservoir Overfill Warning
SPACER, Washer (not shown)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
53
ENGINE SUB-ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
54
ENGINE SUB-ASSEMBLY
Item Part No
Qty Description
Note
1
--
--
--
2
3
4
5
6
7
--
1
1
1
1
4
2
5
1
1
1
ENGINE, 19 HP Kawasaki (Model FH601V-BS20)
ENGINE, 21 HP Kawasaki (Model FH641V-BS01 or AS17)
ENGINE, 25 HP Kawasaki (Model FH721V-AS29)
ENGINE, 27 HP Kohler (Model CV740S)
SCREW, 5/16-18 x 1-1/2” Hex Head Cap GR5
RETAINER, 3/8” Bolt
--
--
--
7091540
7013847
7091706
7027972
7012757
7059099
NUT, 5/16-18 Hex Top Lock GR B
ASSEMBLY, Oil Valve
KEY, 1/4” Square x 1-1/4” Long
PULLEY, Engine, Hydro Drive
used on Series 0 &
NZM27611KH
--
7075625
1
PULLEY, Engine, Hydro Drive
used on Series 1, 19 & 21 HP
Models
8
7075672
7075672
1
1
CLUTCH, Electric (Ogura Model #GT2-RM01)
CLUTCH, Electric (Ogura Model #GT2.5-RM01)
Was 75081
--
used on Series 1, 61” Deck
Models
9
7034448
7029704
7091527
7075082
7091301
7027266
7034829
7091640
7091299
7017033
7011791
7075084
7090188
7075734
7091581
7092044
1
1
1
1
1
1
1
2
2
1
4
1
4
1
4
2
WASHER, Rectangular Steel
BUMPER, Electric Clutch
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
SCREW, 5/16-18 x 1-1/4” Hex Head Cap GR5
WASHER, .468 x 1.85 x .25 Flat
WASHER, 7/16” Split Lock
SCREW, 7/16-20 x 3” Hex Head Cap GR5 (w/Nyloc Patch)
BRACKET, Clutch
BOLT, 3/8-16 x 1” Square Neck Carriage GR5
NUT, 3/8-16 Hex Nyloc
KEY, 1/4” Square x 2-1/4” Long
RETAINER, 5/16” Bolt
SPACER, Ogura Clutch
WASHER, 5/16” Flat
OUTLET, Muffler
used on NZM27611KH only
used on NZM27611KH only
SCREW, #8-18 x 1/2” Hex Washer Self-Tap
NUT, M8 x 1.25 Hex
used on NZM27611KH only (not
shown)
25
7091315
2
WASHER, 5/16” Split Lock
used on NZM27611KH only (not
shown)
Footnotes:
Note** Purchase engine components directly from engine manufacturer dealer.
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
55
CONTROL PANEL ASSEMBLY
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
56
CONTROL PANEL ASSEMBLY
Item Part No
Qty Description
Note
1
2
3
4
5
6
7
7074676
7074801
7074804
7075086
7075046
7090361
7091240
1
2
1
1
1
9
2
CONTROL PANEL
CONTROL LEVER, Throttle/Choke
CONTROL CABLE, Throttle
STRAP, Tether
CONTROL CABLE, Choke
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
SCREW, #10-32 x 5/8” Hex Washer Self-Tap
Note: These items are also
shown on the Electrical
Components page.
8
9
7090376
7075132
7072684
7074796
2
1
1
1
NUT, #10-32 Nyloc
Note: These items are also
shown on the Electrical
Components page.
SWITCH, PTO, Yellow
SWITCH, Ignition
Note: These items are also
shown on the Electrical
Components page.
10
11
Note: These items are also
shown on the Electrical
Components page.
HOUR METER w/Flash Alerts
Note: These items are also
shown on the Electrical
Components page.
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
57
48" CUTTING DECK ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
58
48" CUTTING DECK ASSEMBLY PT.1
Item Part No
Qty Description
WELDMENT, 48” Deck
Note
1
2
7059475
7091305
7027327
7091304
7091299
7073142
7027344
7029264
7091640
7091316
7090543
7029355
7091922
--
1
2
2
2
12
6
4
2
8
8
2
2
4
2
1
2
4
2
Deck Group 58328
SCREW, 3/8-16 x 2” Hex Head Cap, GR5
WELDMENT Pivot Pin
3
4
SCREW, 3/8-16 x 1” Hex Head Cap, GR5
NUT, 3/8-16 Hex Nyloc
5
6
ROLLER Low Density Polyethylene
WASHER, 5/8” Flat SAE
7
8
GAUGE WHEEL, Polyethylene
9
BOLT, 3/8-16 x 1” Square Neck Carriage GR 5
NUT, 1/2-13 Hex, GR B
10
11
12
13
14
15
16
17
18
SCREW, 1/2-13 x 2” Hex Head Cap, GR5
BOLT, 1/2-13 x 3-3/4” Hex Head Cap, GR5
NUT, 1/2-13 Hex Light Nyloc
ASSEMBLY, Pusher Bar (Includes items 15-17)
WELDMENT, Pusher Bar
7059108
7029263
7029258
7053562
SLEEVE - Suspension
BUSHING - Suspension
ASSEMBLY, Chain & Eyebolt (see Front Frame Assy page)
see Front Frame Assembly Pt. 2
page, item 63
19
--
7074684
7075580
7074683
7075581
7036456
7091822
7091331
7091619
7074789
7074790
1
1
1
1
2
2
2
2
1
1
BRACKET, Front Deck Lift, Right Hand (Series 0)
BRACKET, Front Deck Lift, Right Hand (Series 1)
BRACKET, Front Deck Lift, Left Hand (Series 0)
BRACKET, Front Deck Lift, Left Hand (Series 1)
SPACER, Gauge Wheel
20
--
21
22
23
24
25
26
BOLT, 1/2-13 x 5” Hex Head
WASHER, .406 x 1.50 x .120 Flat
NUT, 3/8-16 Hex Flange Lock
WHEEL BRACKET Front Right
(replaces 75008)
(replaces 75009)
WHEEL BRACKET Front Left
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
59
48" CUTTING DECK ASSEMBLY PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
60
48" CUTTING DECK ASSEMBLY PT.2
Item Part No
Qty Description
Note
4
7091304
7091299
7075083
--
3
3
1
1
1
SCREW, 3/8-16 x 1” Hex Head Cap, GR5
5
NUT, 3/8-16 Hex Nyloc
27
28
29
BELT, Primary (HB Section, 91.30” effective length)
ASSEMBLY, Idler (see breakdown on Idler Assy page)
Deck Group 58328
--
ASSEMBLY, Center Spindle (see breakdown on Deck Spindle
Assy page)
30
--
2
ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy
page)
31
32
33
34
35
36
37
38
39
40
7027950
7029277
7058873
7091313
7029278
7072915
7029261
7090361
7074571
7074552
1
1
1
1
1
1
1
4
1
1
SPRING, Chute
PIN, Chute Hinge
WELDMENT, Chute Deflector
PIN, 3/32 x 1” Cotter
SPRING, Idler (1.17” O.D. x 7.5” long)
SPRING, Idler Primary (1.25” O.D. x 10” long)
V-BELT, Secondary- 48” (HB Section, 109.75” effective length)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
BELT COVER, Left Hand
BELT COVER, Right Hand
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
61
52" CUTTING DECK ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
62
52" CUTTING DECK ASSEMBLY PT.1
Item Part No
Qty Description
Note
1
2
7059374
7091305
7027327
7091304
7091299
7073142
7027344
7029264
7091640
7091316
7090543
7029355
7091922
--
1
2
WELDMENT, 52” Deck
Deck Group 58327
SCREW, 3/8-16 x 2” Hex Head Cap, GR5
WELDMENT Pivot Pin
3
1
4
2
SCREW, 3/8-16 x 1” Hex Head Cap, GR5
NUT, 3/8-16 Hex Nyloc
5
12
6
6
ROLLER Low Density Polyethylene
WASHER, 5/8” Flat SAE
7
4
8
4
GAUGE WHEEL, Polyethylene
BOLT, 3/8-16 x 1” Square Neck Carriage GR 5
NUT, 1/2-13 Hex, GR B
9
12
8
10
11
12
13
14
15
16
17
18
2
SCREW, 1/2-13 x 2” Hex Head Cap, GR5
BOLT, 1/2-13 x 3-3/4” Hex Head Cap, GR5
NUT, 1/2-13 Hex Light Nyloc
2
2
2
ASSEMBLY, Pusher Bar (Includes items 15-17)
WELDMENT, Pusher Bar
7059108
7029263
7029258
7053562
1
2
SLEEVE - Suspension
4
BUSHING - Suspension
2
ASSEMBLY, Chain & Eyebolt (see Front Frame Assy page, item
63)
19
7074569
2
1
1
4
4
4
2
2
1
1
BRACKET, Front Deck Lift
used on Series 0
used on Series 1
used on Series 1
19A 7075582
19B 7075583
BRACKET, Front Deck Hanger R. H.
BRACKET, Front Deck Hanger L. H.
SPACER, Gauge Wheel
20
21
22
23
24
25
26
7036456
7091822
7091922
7091331
7091619
7074789
7074790
BOLT, 1/2-13 x 5” Hex Head
NUT, 1/2-13 Hex Light Nyloc
WASHER, .406 x 1.50 x .120 Flat
NUT, 3/8-16 Hex Flange Lock
WHEEL BRACKET Front Right
WHEEL BRACKET Front Left
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
63
52" CUTTING DECK ASSEMBLY PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
64
52" CUTTING DECK ASSEMBLY PT.2
Item Part No
Qty Description
Note
4
5
7091304
3
3
1
1
SCREW, 3/8-16 x 1” Hex Head Cap, GR5
7091299
NUT, 3/8-16 Hex Nyloc
27
28
--
--
ASSEMBLY, Idler (see breakdown on Idler Assy page)
Deck Group 58327
ASSEMBLY, Center Spindle (see breakdown on Deck Spindle
Assy page)
29
--
2
ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy
page)
30
31
32
33
34
35
36
37
38
39
40
7075083
7027950
7029277
7044806
7091313
7072915
7029278
7029266
7090361
7074571
7074552
1
1
1
1
1
1
1
1
4
1
1
BELT, Primary (HB Section, 91.30” effective length)
SPRING, Chute
PIN, Chute Hinge
WELDMENT, Chute Deflector (52” Euro)
PIN, 3/32 x 1” Cotter
SPRING, Idler Primary (1.25” O.D. x 10” long)
SPRING, Idler (1.17” O.D. x 7.5” long)
V-BELT, Secondary- 52” (HB Section, 116.30” effective length)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
BELT COVER, Left Hand
BELT COVER, Right Hand
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
65
61" CUTTING DECK ASSEMBLY PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
66
61" CUTTING DECK ASSEMBLY PT.1
Item Part No
Qty Description
WELDMENT, 61” Deck
Note
1
2
7044815
7091305
7027327
7091304
7091299
7073142
7027344
7029264
7091640
7091922
7090543
7029355
--
1
2
2
2
32
6
4
2
8
6
4
2
2
1
2
4
1
1
2
2
4
1
1
2
SCREW, 3/8-16 x 2” Hex Head Cap, GR5
WELDMENT Pivot Pin
3
4
SCREW, 3/8-16 x 1” Hex Head Cap, GR5
NUT, 3/8-16 Hex Nyloc
5
6
ROLLER Low Density Polyethylene
WASHER, 5/8” Flat SAE
Was 79226
7
8
GAUGE WHEEL, Polyethylene
BOLT, 3/8-16 x 1” Square Neck Carriage GR 5
NUT, 1/2-13 Hex Light Nyloc
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
SCREW, 1/2-13 x 2” Hex Head Cap, GR5
BOLT, 1/2-13 x 3-3/4” Hex Head Cap, GR5
ASSEMBLY, Pusher Bar (Includes items 14-16)
WELDMENT, Pusher Bar
7044823
7029263
7029258
7075382
7075381
7091822
7091331
7091619
7074789
7074790
7036456
SLEEVE - Suspension
BUSHING - Suspension
BRACKET, Deck Lift, Right Hand
BRACKET, Deck Lift, Left Hand
BOLT, 1/2-13 x 5” Hex Head
WASHER, .406 x 1.50 x .120 Flat
NUT, 3/8-16 Hex Flange Lock
WHEEL BRACKET Front Right
WHEEL BRACKET Front Left
SPACER, Gauge Wheel
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
67
61" CUTTING DECK ASSEMBLY PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
68
61" CUTTING DECK ASSEMBLY PT.2
Item Part No
Qty Description
Note
4
5
7091304
3
3
1
1
SCREW, 3/8-16 x 1” Hex Head Cap, GR5
7091299
NUT, 3/8-16 Hex Nyloc
27
28
--
--
ASSEMBLY, Idler (see breakdown on Idler Assy page)
ASSEMBLY, Center Spindle (see breakdown on Deck Spindle
Assy page)
29
--
2
ASSEMBLY, Spindle (see breakdown on Deck Spindle Assy
page)
30
31
32
33
34
35
36
37
38
39
7071766
7027950
7029277
7058291
7091313
7072915
7029278
7029268
7090361
7075384
1
1
1
1
1
1
1
1
4
2
BELT, Primary (HB Section, 94.20” effective length)
SPRING, Chute
Replaces 75623
PIN, Chute Hinge
WELDMENT, Chute Deflector (61” Euro)
PIN, 3/32 x 1” Cotter
SPRING, Idler Primary (1.25” O.D. x 10” long)
SPRING, Idler (1.17” O.D. x 7.5” long)
V-BELT, Secondary- 61” (HB Section, 127.0” effective length)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
BELT COVER
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
69
IDLER ASSEMBLIES (58885)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
70
IDLER ASSEMBLIES (58885)
Item Part No
Qty Description
Note
1
2
7058147
--
1
1
WELDMENT, Idler Plate
ASSEMBLY, Primary Idler
Includes items 6 (2), 7, 8 (3), 9,
10, 11, 12, 13 & 14
3
--
1
ASSEMBLY, Secondary Idler
Includes items 6 (2), 7, 8, 9, 15,
16 & 17
4
5
7023747
7012709
7074720
7014669
7090517
7091585
7027220
7058877
7035657
7035656
7034422
7091553
7058329
7029273
2
2
4
2
4
2
1
1
1
1
1
1
1
1
BUSHING, 1” Machine
RING, 1” External Retaining
BUSHING, Idler PM
6
7
LUBE FITTING, 3/16”
8
WASHER, 3/8” Flat
9
NUT, 3/8-16 Hex Center Lock, GR5 or B
SCREW, 3/8-16 x 3-1/4” Hex Head Cap, GR5
WELDMENT, Primary Idler Arm
BUSHING - Idler
10
11
12
13
14
15
16
17
RETAINER, Idler Belt
PULLEY, Flat Idler
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR5
WELDMENT, Secondary Idler Arm
PULLEY, Idler
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
71
DECK SPINDLE ASSEMBLIES
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
72
DECK SPINDLE ASSEMBLIES
Item Part No
Qty Description
Note
1
2
3
4
5
6
7
7054011
7029254
7029274
7029384
7029422
7058237
7029302
1
1
1
1
2
1
6
SUB-ASSEMBLY, Spindle (Includes indented items below)
SPACER, Bearing
RING, Spindle Retaining
VENT, Spindle (Alemite # 321839)
BALL BEARING (2 per item 1, sub-assembly)
HOUSING, Spindle
BOLT, Ribbed (3/8-16 x 1-1/4” Thread) (6 per item 1, sub-
assembly)
8
7076998
7059311
7029271
7029245
7091299
7016440
7075075
7075076
7029250
7075771
7075751
7075770
7063234
7063237
7029270
7063238
1
1
4
1
6
1
1
1
1
3
3
3
1
1
1
1
FITTING, Lube (1/4-28 Thread; Alemite # 3038-B)
SHAFT, Spindle
9
10
11
12
13
14
--
SPACER, Blade
PULLEY, 5.75” Diameter
NUT, 3/8-16 Hex Nyloc (6 per spindle assembly)
WASHER, Beveled
PULLEY, Driven (48” Deck only)
PULLEY, Driven (52” Deck only)
PULLEY, Driven (61” Deck only)
BLADE, 16-1/2” (48” Deck only)
BLADE, 18” (52” Deck only)
BLADE, 18” (61” Deck only)
BOLT, 5/8-11 x 7-1/2” Hex, Grade 5
NUT, 5/8-11 Hex Flange Lock, GR5
WASHER, Spindle
--
15
--
Was 29247
Was 29246
Was 17081
--
16
17
18
19
SEAL, Nylos
For Brg., Pre-Seal Kit (63240)
installation, discard 3 & replace
with 19 & 20.
20
7013370
1
WASHER
For Brg., Pre-Seal Kit (63240)
installation, discard 3 & replace
with 19 & 20.
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
73
DECALS
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
74
DECALS
Item Part No
Qty Description
Note
1
2
3
--
4
--
--
5
6
7
8
7075039
7035846
7044792
7075565
7044793
7075566
7075567
7013010
7075756
7075040
7073647
1
1
1
1
1
1
1
1
1
1
2
DECAL,Motion Control Lever
DECAL, Fuse
DECAL, 48” Deck (Series 0)
DECAL, 48” Deck (Series 1)
DECAL, 52” Deck (Series 0)
DECAL, 52” Deck (silver) (Series 1)
DECAL, 61” Deck (silver)
DECAL, Warning (CPSC Cut-Finger)
DECAL, Control Panel
not shown
replaces 75041
DECAL, Park Brake
DECAL, Danger, Guard/Catcher
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
75
DECALS (continued)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
76
DECALS (continued)
Item Part No
Qty Description
Note
9
7075296
7073596
7027733
7045108
7071916
7075760
7029470
7075433
7075747
1
1
1
1
2
1
1
1
1
DECAL, Caution (Spring Mechanism)
DECAL, Warning
10
11
12
13
--
DECAL, Ear Protection
DECAL, Tank Selector
DECAL, SNAPPER (14.56” long)
DECAL, SNAPPER (8.0” long)
DECAL, Patent Numbers
DECAL, Oil Reservoir Overfill Warning
DECAL, Detent
14
15
16
not shown
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
77
ELECTRICAL COMPONENTS (except wiring) PT.1
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
78
ELECTRICAL COMPONENTS (except wiring) PT.1
Item Part No
Qty Description
Note
1
2
7072684
7075622
1
1
SWITCH, Ignition
SOLENOID, Super Trombetta
vendor p/n 762-1221-210;
replaces p/n 18604
3
5
--
6
7
8
9
7073406
7029211
7023354
7091603
7090741
7075132
7074796
1
1
1
3
2
1
1
KEY SET (not shown)
qty. 2 keys per set
used on series 0
used on series 1
SWITCH, Seat, NC
SWITCH, Seat, NC
NUT, 1/4-20 Hex Nyloc
SCREW, 1/4-20 x 5/8” Hex Head w/loose captured washer
SWITCH, PTO, Yellow
HOUR METER w/2 Flash Alerts
Sendec Corp. Model No. 804-
204
10
11
12
13
14
15
16
17
18
19
7035610
7090072
7091294
7090372
7074809
7091240
7090376
7012080
7015861
7035638
1
2
BATTERY, 12V. 11 Plate 375CCA
SCREW, 1/4-20 x 5/8” Hex Head Cap GR5
WASHER, 9/32 I.D. x 5/8” O.D. Flat
NUT, 1/4-20 Hex Center Lock GR5 or B
BRACKET, Battery Hold-Down
SCREW, #10-32 x 5/8” Hex Washer Self-Tap
NUT, #10-32 Hex Nyloc
2
2
1
2
2
15
1
CABLE TIE, 7” long
CLIP, Harness
4
CLIP, Open J 3/8” Cushioned
shown on Rear Frame & Tank
Bracket page & Seat Assembly
pages
20
7091122
2
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
79
ELECTRICAL COMPONENTS (except wiring) PT.2
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
80
ELECTRICAL COMPONENTS (except wiring) PT.2
Item Part No
7022886
Qty Description
SWITCH, DP NO/NC Snap-In
Note
4
3
*=Normally Open **=Normally
Closed
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
81
WIRING HARNESS (Kawasaki engines)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
82
WIRING HARNESS (Kawasaki engines)
Item Part No
Qty Description
Note
1
2
3
4
5
7074795
7075038
7035609
7075602
7075091
1
1
1
1
1
HARNESS, Wiring
CABLE, Battery- Positive (6 Gage, 34” long)
CABLE, Battery- Ground (6 Gage/14 Gage, 23” long)
CABLE, Solenoid to Starter (6 Gage, 10” long)
WIRE, Solenoid- Ground (10 Gage, 6-1/2” long)
not shown
not shown
not shown
not shown
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
83
WIRING HARNESS (Kohler Engines)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
84
WIRING HARNESS (Kohler Engines)
Item Part No
Qty Description
Note
1
2
3
7029337
7075038
7035609
1
1
1
HARNESS, Wiring, Kohler/Twin
CABLE, Battery- Positive (6 Gage, 34” long)
not shown
not shown
CABLE, Battery- Ground (6 Gage/14 Gage, 23” long)
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
85
WIRING SCHEMATIC (Kawasaki engines)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
86
WIRING SCHEMATIC (Kawasaki engines)
Item Part No
7074795
Qty Description
HARNESS, Wiring
Note
1
1
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
87
WIRING SCHEMATIC (Kohler Engines)
Manual No.
7006930
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
TP 400-5017-4-NZ-N
88
WIRING SCHEMATIC (Kohler Engines)
Item Part No
7029337
Qty Description
HARNESS, Wiring, Kohler/Twin
Note
1
1
Footnotes:
MID MOUNT Z-RIDER
NZM SERIES 0 & 1
Manual No.
7006930
TP 400-5017-4-NZ-N
89
Parts Manual for
MID MOUNT Z-RIDER
ZERO TURNING HYDRO DRIVE
NZM SERIES 0 & 1
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No.
7006930
Revision 4, 1/18/2006
TP 400-5017-4-NZ-N
|