WALK
GREENS MOWERS
180C 220C 260C
Download from Www.Somanuals.com. All Manuals Search And Download.
John Deere provides an Operator
Presence Bail as standard
1
equipment on 18-, 22- and
26-inch walk greens mowers.
1
2
3
Quick-adjust handlebar fits
operators of all sizes.
2
Forward-mounting pivot point
reduces operator influence over
cutting plane of the mower.
Oil drain spout allows for quick
and neat oil changes.
4
5
6
Larger muffler reduces noise.
Hand adjustment knobs allow for
easy, fine adjustment of
bedknife-to-reel. And less noise.
7
8
Redesigned drum drives have a
more efficient design, requiring
less maintenance.
4
3
True 18-, 22- and 26-inch frames
allow the operator to follow the
cut lines and overlap with more
accuracy.
5
7
9
Grass catcher design improves
grass catching ability, operator
vision, and improved cut line
marking.
6
8
9
A. Fixed-position Reel
All of the C-Series Walk Greens Mowers feature a fixed-position
reel for an even and consistent cutting height. Finger tight knobs
are in place for easy bedknife and front roller adjustments.
B
C
B. Increased Strength
Frame cross members have a double section for increased
strength. And rubber isolation mounts reduce engine vibration.
C. Easy Access Oil
Changing oil has never been easier or quicker, thanks to an oil
drain spout.
A
Download from Www.Somanuals.com. All Manuals Search And Download.
From tee to green,
walk with the best.
For the undulating greens on your
course, the 18-inch walker, the 180C.
Like the 220C and 260C, the 180C
features a dual-traction rear drum
powered by an external differential drive.
This delivers even power distribution to
both sides for the straightest possible
tracking. It also makes for easy turning
and excellent maneuverability. A 2.0 mm
ultra-low-cut bedknife for cuts down
to 5/64-inch is standard equipment on
the 180C, and a 2.5 mm tournament
bedknife is available as an option.
180C WALK GREENS MOWER
Exceptional Parts Support
Behind every John Deere product is a parts support network to get you
the high-quality part you need fast. If your distributor does not have a
part in stock, in most cases you can order it by 5 p.m., and have it the
next day. Or even order parts online at www.JDParts.JohnDeere.com.
Tires
Transport wheels feature quick-release wheel latches and cast-iron
hubs ensure quick removal and installation with precision fit.
Roller
The machine-grooved and machine-smooth front rollers are both cut from
solid bar stock to deliver more strength and better mowing performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
A solid all-around
performer, the 220C.
After getting feedback from customers, the
220C features a redesigned rear drum for
less maintenance, reduced sound levels,
an ergonomically improved handlebar, an
easier height-of-cut adjustment, and better
serviceability. A smaller pitched chain and
new chain adjuster help dampen sound.
A decreased distance between safety bail
and handlebar makes for easier handling.
And a forward-mounted pivot point aids in
machine tracking.
220C WALK GREENS MOWER
11-Blade Reel
The fixed-position 11-blade reel is John Deere
manufactured and made out of high-strength
steel, for longer wear and less maintenance.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
260C WALK GREENS MOWER
The 260C. The perfect
mower for tees and
approach areas.
If you walk mow tees or want to improve
productivity on greens, the 260C is the
perfect choice. The 260C, like the 220C
and 180C, is the lightest walk mower in
its class. The height-of-cut adjustment is
easy, thanks to the bedknife-to-reel
adjustment knobs.You can choose between
an 11-blade or 7-blade reel.A larger muffler
reduces noise. And all the controls move
forward for ease of operation.
Better Traction
The rear roller on the 260C is
dimpled for better traction.
Tuscon CC •Tuscon, AZ
Download from Www.Somanuals.com. All Manuals Search And Download.
22B UTILITY TRAILER
Axle brackets easily adjust to
accommodate all John Deere
walk greens mowers.
Wide wheelbase and a low center
of gravity add to the stability of
the trailer on uneven ground or
while turning.
The best way to tr
the 22B Utility Tra
Box and tailgate ramp are covered
with a rubber mat for easy loading
and protection for the drive drum,
roller, and bedknife
The 22B can be used with a wide range of
John Deere Mid-Duty Utility Vehicles or the
ProGator™ Heavy-Duty Utility Vehicle.Additional
optional axle bracket allows two greens
mowers to be trailered.And the 22B allows
the operator to leave transport wheels back
in the maintenance building if desired.
1
2
3
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
180C
220C
260C
ENGINE*
Type
Honda, air-cooled GX120
Honda, air-cooled GX120
Honda, air-cooled GX120
Cycle
4
4
4
Bore and Stroke
2.36 in. x 1.73 in. (60 x 44 mm)
118 cc
8.5:1
4.0 hp (2.98 kW) @ 3,600 rpm
Counterclockwise viewed from shaft side
Tilted up to 20 degrees in any direction
1,300 rpm
2.36 in. x 1.73 in. (60 x 44 mm)
118 cc
8.5:1
4.0 hp (2.98 kW) @ 3,600 rpm
Counterclockwise viewed from shaft side
Tilted up to 20 degrees in any direction
1,300 rpm
2.36 in. x 1.73 in. (60 x 44 mm)
118 cc
8.5:1
4.0 hp (2.98 kW) @ 3,600 rpm
Counterclockwise viewed from shaft side
Tilted up to 20 degrees in any direction
1,300 rpm
Piston Displacement
Compression Ratio
Horsepower
Direction of Rotation of Output Shaft
Inclination Limit
Idle Speed at Output Shaft
Maximum Speed at Output Shaft
3,100 rpm
3,100 rpm
3,100 rpm
FUEL
Type
Tank Capacity
Regular grade—unleaded or leaded
2.7 U.S. qt. (2.5 L)
Regular grade—unleaded or leaded
2.7 U.S. qt. (2.5 L)
Regular grade—unleaded or leaded
2.7 U.S. qt. (2.5 L)
OIL
Type
Capacity
Differential Drive Capacity
SAE 30 or SAE 10W-30
0.6 U.S. qt. (0.57 L)
0.7 U.S. pts. (0.35 L)
SAE 30 or SAE 10W-30
0.6 U.S. qt. (0.57 L)
0.7 U.S. pts. (0.35 L)
SAE 30 or SAE 10W-30
0.6 U.S. qt. (0.57 L)
0.7 U.S. pts. (0.35 L)
MACHINE
Cutting Equipment:
Cutting Width
Cutting Height (Minimum)
Standard—3.0 mm Bedknife
18 in. (45.7 cm)
1/8 in. (3.2 mm)
22 in. (55.9 cm)
26 in. (66.0 cm)
1/8 in. (3.2 mm) (standard on 220C)
1/8 in. (3.2 mm); max of 1.375-in. (35 mm)
with 3-in. roller
N/A
N/A
Optional—2.5 mm Bedknife
Optional—2.0 mm Bedknife
Optional—Tee Bedknife
Frequency of Clip
7/64 in. (2.8 mm)
5/64 in. (2.0 mm) (standard on 180C)
N/A
7/64 in. (2.8 mm)
5/64 in. (2.0 mm)
N/A
3/16 in. (4.8 mm)
Standard
0.182 in. (4.62 mm)
0.182 in. (4.62 mm)
0.182 in. (4.62 mm) 11 blade
0.286 in. (7.26 mm) 7 blade
REEL
Diameter
5 in. (127 mm)
5 in. (127 mm)
5 in. (127 mm)
Number of Blades
Material
Bedknife—Standard
11
11
11 or 7 blade
Heat-treated chromium molybdenum steel
0.118-in. (3.0 mm) thick x 26-in. (66 cm) long
Heat-treated chromium molybdenum steel
0.098-in. (2.5 mm) thick x 18-in. (45.8 cm) long 0.118-in. (3 mm) thick x 22-in. (56.0 cm) long
Heat-treated chromium molybdenum steel
ROTARY BRUSH AND GREENS
TENDER CONDITIONER (Optional)
Brush
Interlocked w/reel, rotation in reverse
direction; 2 3/8-in. (60 mm) diameter nylon
Specially hardened carbon tool steel; star
shaped; 2 3/8-in. (60 mm) diameter; 60 blades
13/32 in. (10 mm) below to 5/8 in. (16 mm)
above cut
Gear driven from reel shaft opposite direction
of reel rotation powers brush or vertical cutter
6 Ib. (2.7 kg); polyethylene
Interlocked w/reel, rotation in reverse
direction; 2 3/8-in. (60 mm) diameter nylon
Specially hardened carbon tool steel; star
shaped; 2 3/8-in. (60 mm) diameter; 75 blades
13/32 in. (10 mm) below to 5/8 in. (16 mm)
above cut
Gear driven from reel shaft opposite direction
of reel rotation powers brush or vertical cutter
7 Ib. (3.2 kg); polyethylene
Interlocked w/reel, rotation in reverse
direction; 2 3/8-in. (60 mm) diameter nylon
Specially hardened carbon tool steel; star
shaped; 2 3/8-in. (60 mm) diameter; 88 blades
13/32 in. (10 mm) below to 5/8 in. (16 mm)
above cut
Gear driven from reel shaft opposite direction
of reel rotation powers brush or vertical cutter
8 Ib. (3.7 kg); polyethylene
Vertical Cutter Blades
Adjustable Brush or Cutter Height
Gear Drive
Grass Catcher
CLUTCHES
Transport
Belt tension
On/off
On/off
Belt tension
On/off
On/off
Belt tension
On/off
On/off
Reel Jaw-Type Clutch
Brush/GTC Jaw-Type Clutch
Traction Drum
Dual, aluminum, traction
Dual, aluminum, traction
Dual, aluminum, traction
TRAVELING DEVICE
Forward Speed
5.2 mph (8.4 km/h) with transport wheels
@ 3,500 engine rpm
5.2 mph (8.4 km/h) with transport wheels
@ 3,500 engine rpm
5.2 mph (8.4 km/h) with transport wheels
@ 3,500 engine rpm
Roller (Rear)
Roller (Front) (Grooved or Smooth)
Aluminum, 7 1/2-in. (190 mm) diameter
Machined steel, 2 3/8-in. (60 mm) diameter
(for cutting height adjustment)
Aluminum, 7 1/2-in. (190 mm) diameter
Machined steel, 2 3/8-in. (60 mm) diameter
(for cutting height adjustment)
Aluminum, 7 1/2-in. (190 mm) diameter
Machined steel, 2 3/8-in. (60 mm) diameter
(for cutting height adjustment)
DIMENSIONS
Length (w/Tires Installed)
Width (w/Tires Installed)
Height (w/Tires Installed)
Weight (Less Brush Drive and
Transport Wheels, with Catcher)
Certificate
37 in. (94.0 mm)
33 1/4 in. (84.5 cm)
47 in. (119.0 cm)
203 Ib. (92.3 kg)
37 in. (94.0 mm)
37 1/4 in. (94.6 cm)
47 in. (119.0 cm)
219 Ib. (99.5 kg)
37 in. (94.0 mm)
41 1/4 in. (104.8 cm)
47 in. (119.0 cm)
235 Ib. (106.8 kg)
ANSI B71.4-2004
ANSI B71.4-2004
ANSI B71.4-2004
*The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower will
be less. Meets 2007 CARB standards.
This literature has been compiled for worldwide circulation. While general information, pictures and descriptions are provided, some illustrations and text may
include finance, credit, insurance, product options and accessories NOT AVAILABLE in all regions. PLEASE CONTACT YOUR LOCAL DEALER FOR DETAILS. John Deere
reserves the right to change specification, design and price of the products described in this literature without notice. John Deere’s green and yellow color scheme,
the leaping deer symbol, and JOHN DEERE are trademarks of Deere & Company.
PLATINUM PARTNER
Download from Www.Somanuals.com. All Manuals Search And Download.
DKA2633 (08-01) Litho in U.S.A. 08-2633
|