Op e r a t O r ’s Ma n u a l
Triple Rear Bagger — 19A40002100
WARNING
READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL
BEFORE ATTEMPTING TO OPERATE THIS MACHINE.
FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY.
CUB CADET LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019
Printed In USA
Form No. 769-04626C
(February 24, 2010)
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safe Operation Practices
2
WARNING! This symbol points out important safety instructions which, if not followed,
could endanger the personal safety and/or property of yourself and others. Read and follow
all instructions in this manual before attempting to operate this machine. Failure to comply
with these instructions may result in personal injury.
When you see this symbol. HEED ITS WARNING!
DANGER! This attachment was built to be used according to the safe operation practices in
this manual. Carelessness or error on the part of the operator can result in serious injury.
Mowers are capable of amputating hands and feet and throwing objects. Failure to observe
the following safety instructions as well as the instructions provided with your mower, could
result in serious injury or death.
9.
Disengage blade(s), set parking brake, stop engine and wait
until the blade(s) come to a complete stop before opening
bagger attachment’s top cover, removing grass catcher,
emptying grass, unclogging chute, removing any grass or
debris, or making any adjustments.
General Operation
1.
Read, understand, and follow all instructions on your
equipment and in their manuals before attempting to
assemble and operate. Keep this manual in a safe place for
future and regular reference and for ordering replacement
parts.
10. Never leave a running machine unattended. Always turn
off blade(s), place transmission in neutral, set parking
brake, stop engine and remove key before dismounting.
2.
To help avoid blade contact or a thrown object injury, keep
bystanders, helpers, children and pets at least 75 feet from
the mower while it is in operation. Stop machine if anyone
enters the area.
11. Your machine is designed to cut normal residential grass of
a height no more than 10”. Do not attempt to mow through
unusually tall, dry grass (e.g., pasture) or piles of dry leaves.
Dry grass or leaves may contact the engine exhaust and/
or build up on the mower deck presenting a potential fire
hazard.
3.
Thoroughly inspect the area where the equipment is to be
used. Remove all stones, sticks, wire, bones, toys, and other
foreign objects which could be picked up and thrown by
the blade(s). Thrown objects can cause serious personal
injury.
12. If situations occur which are not covered in this manual, use
care and good judgment. Contact your customer service
representative for assistance.
4.
5.
Always wear safety glasses or safety goggles during
operation and while performing an adjustment or repair
to protect your eyes. Thrown objects which ricochet can
cause serious injury to the eyes.
Slope Operation
Slopes are a major factor related to loss of control and tip-over
accidents which can result in severe injury or death. Attachments
can also affect the stability of the machine. All slopes require
extra caution.
Do not operate the mower without the discharge cover
or entire grass catcher in its proper place. A missing
or damaged discharge cover or grass bag attachment
component may result in thrown objects or blade contact
injuries.
For your safety, use the slope gauge included as part of this
manual to estimate the angle of slopes before operating this
machine on a sloped or hilly area. If the slope is greater than 10
degrees as shown on the slope gauge, do not operate the mower
with the grass bag attachment installed on that area or serious
injury could result.
6.
7.
Do not put hands or feet near rotating parts or under the
cutting deck. Contact with the blade(s) can amputate
hands and feet.
Shut off mower’s engine and wait for blades to come to
a complete stop before unclogging mower’s discharge
opening or bagger parts.
Do:
1.
Mow up and down slopes, not across. Exercise extreme
caution when changing direction on slopes.
8.
Slow down before turning. Operate the machine smoothly.
Avoid erratic operation and excessive speed. Be aware
that a grass catcher attachment can affect the handling
characteristics of your mower.
2.
Watch for holes, ruts, bumps, rocks, or other hidden
objects. Uneven terrain could overturn the machine. Tall
grass can hide obstacles.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Use slow speed. Choose a low enough speed setting so
that you will not have to stop or shift while on the slope.
Tires may lose traction on slopes even though the brakes
are functioning properly. Always keep machine in gear
when going down slopes to take advantage of engine
braking action.
General Service
1.
Before cleaning, repairing, or inspecting, make certain the
blade(s) and all moving parts have stopped. Disconnect the
spark plug wire and ground against the engine to prevent
unintended starting.
2.
Keep all nuts, bolts, and screws tight to be sure the
equipment is in safe working condition.
4.
5.
Follow the manufacturer’s recommendations for wheel
weights or counterweights to improve stability.
3.
Never tamper with your mower’s safety interlock system
or other safety devices. Check their proper operation
regularly.
Keep all movement on the slopes slow and gradual. Do
not make sudden changes in speed or direction. Rapid
engagement or braking could cause the front of the
machine to lift and rapidly flip over backwards which could
cause serious injury.
4.
5.
Never attempt to make adjustments or repairs while the
mower’s engine is running.
Grass catcher components and the discharge cover are
subject to wear and damage which could expose moving
parts or allow objects to be thrown. For safety protection,
frequently check components and replace immediately
with original equipment manufacturer’s (O.E.M.) parts only,
listed in this manual. Use of parts which do not meet the
original equipment specifications may lead to improper
performance and compromise safety!
6.
Avoid starting or stopping on a slope. If tires lose traction,
disengage the blade(s) and proceed slowly straight down
the slope.
Do Not:
1.
Do not turn on slopes unless necessary; then, turn slowly
and gradually downhill, if possible.
2.
Do not mow near drop-offs, ditches or embankments. The
mower could suddenly turn over if a wheel is over the edge
of a cliff, ditch, or if an edge caves in.
6.
Maintain or replace safety and instruction labels, as
necessary.
3.
Do not try to stabilize the machine by putting your foot on
the ground.
4.
5.
Do not use a grass catcher on steep slopes.
Do not mow on wet grass. Reduced traction could cause
sliding.
Safety Symbols
This table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the
machine before attempting to assemble and operate.
Symbol
Description
READ THE OPERATOR’S MANUAL(S)
Read, understand, and follow all instructions in the manual(s) before attempting to
assemble and operate
STOP
Turn off the engine before opening the bagger cover.
WARNING! Your Responsibility—Restrict the use of this power machine to persons who read, understand and
follow the warnings and instructions in this manual and on the machine.
SAVE THESE INSTRUCTIONS!
4
se c t i O n 2 — iM p O r t a n t sa f e Op e r a t iO n pr a c t ic e s
Download from Www.Somanuals.com. All Manuals Search And Download.
se c t i O n 2 — iM p O r t a n t sa f e Op e r a t iO n pr a c t ic e s
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Contents of Carton
3
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below
and shown in Fig. 3-1. Three hardware packs are included in this kit and are detailed on the following page.
•
•
•
•
•
•
•
•
Hinge Cover Pin
Bagging Blades (6 blades total)
Two Deck Baffles
Chute Discharge Plate
Chute Stop Bracket
•
•
•
•
•
•
•
•
•
Hitch Bracket Kit (3 Pcs. & Hardware Pack)
Chute Tube Extension
Discharge Chute Elbow
Hitch Support
Grass Catcher Cover Screen
Grass Catcher Cover
Three Grass Bag Assemblies
Upper Chute Tube
Upper Chute Support
Upright Support
Bag Support Assembly
Three Hardware Packs (Detailed & illustrated on next page)
Hitch Bracket Kit
(3 Pcs. & Hardware)
Figure 3-1
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS OF HARDWARE PACK
This grass collector kit is shipped with three loose hardware packs enclosed and one set of hardware included in the mounting bracket kit.
Please check your hardware packs against the illustrations below. The quantities for each item is listed in parenthesis.
Hardware included with 689-00096
Hardware Pack 689-00163
(3)
(1)
(1)
712-04065
710-3008
710-0276
(3)
(2)
712-04064
712-04063
(2)
Hardware Pack 689-00087
(1)
726-3046
(4)
(3)
710-3008
711-0309A
(4)
710-3015
(1)
712-04063
(2)
714-0117
710-04484
723-0476
(1)
(3)
710-3168
se c t i O n 3 — cO n t e n t s O f ca r t O n
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Assembly & Installation
3
NOTE: References to left, right, front and rear of the tractor are
from the operator’s position, unless otherwise stated.
•
Before assembly, place the tractor on a firm, level surface,
disengage the PTO, stop the tractor engine and set the
parking brake.
•
For convenience, pivot the seat forward and leave it in
that position until the grass collector is fully mounted and
assembled.
Assemble Mounting Brackets
To assemble the bagger mounting assembly, locate the
mounting assembly pack and follow these steps:
1.
Attach the two hitch side brackets to the universal rear
attachment bracket using four hex bolts and flange lock
nuts. With the hooks on the hitch side brackets pointing
down, the tabs on the hitch plates should be pointing
upwards. See Fig. 4-1.
Side View
Figure 4-2
Assembling The Support Assembly
Locate the upright support bracket and the bag support
assembly. Assemble it by following these steps:
1.
Lay the bag support assembly topside down with the
mounting bracket portion facing upwards.
2.
Insert the notched end of the vertical support bracket into the
bag support assembly, as in Fig. 4-3, and secure with a 5/16-18
carriage bolt and 5/16-18 flange lock nut. See Fig. 4-4.
Figure 4-1
2.
Flip over assembly and mount the hitch support bracket to
the mounting assembly using the hardware found in pack
689-00087. See Fig. 4-2.
Note: It might be easier during the mounting stage to
leave this hardware only finger tight to facilitate lining up
the hitch hole for the clevis pin. You will be instructed to
tighten this hardware later in this manual.
Figure 4-3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: The clevis pin can be fed down through the hitch
plate and secured underneath with the hairpin clip, or it
may be easier to feed the clevis pin up through the hitch
plate hole and secure with the hairpin clip on the topside.
The latter method may be preferred since it can be easier
to insert the hairpin clip. Either way will work, the decision
should be based on operator preference.
Figure 4-4
Align hole on bracket
with hole on tractor
Mount Assembly on Tractor
Install mounting assembly on tractor as follows:
1.
Place the hooked ends of the mounting assembly over
the shoulder bolts, as in Fig. 4-5, on the tractor and line up
the hitch support bracket center hole with the hole on the
tractor’s hitch.
Figure 4-6
Note: If you decided to leave the hitch support only
finger tight during the assembly process, tighten all of the
hardware securely at this time.
3.
Install the bagger hanger assembly onto the mounting
assembly on the tractor by hooking it over the hitch plate
in the center, lining up the center mounting hole as seen in
Fig. 4-7.
Figure 4-5
2.
Install the clevis pin from hardware pack 689-00087 into the
tractor’s hitch and secure with a hairpin clip inserted into the
top hole, which is the hole located closest to the head of the
clevis pin. See Fig. 4-6.
Mounting Hole
Figure 4-7
4.
Secure the hanger assembly to the mounting assembly
using a 5/16” bolt and flange nut provided. See Fig. 4-7.
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembling Remaining Bagger Components
Now that the mounting brackets are assembled and are in place
on the tractor, follow these steps to assemble the remaining
bagger components.
1.
Snap the plastic upper chute support in place by first
clipping the side portion onto the bagger support rail (1)
with the edge of the snap feature aligned with the red line,
as seen in the inset of Fig. 4-8.
2.
Snap the front side of the chute support to the rail (2), as
shown in Fig. 4-8.
2
1
Make sure screen sits under the cover’s lip
Figure 4-10
5.
Install the bagger cover onto the bag support assembly, as
seen in Fig. 4-11. The plastic cover goes inside of the two
mounting tabs.
Figure 4-8
3.
Install the bagger screen into the bagger cover by first
inserting the end closest to the center into the cutout
mounting hole, as in Fig. 4-9. Make sure to feed the screen
under the lip, as in Fig. 4-10.
Cover mounts in
between these
two tabs
Figure 4-11
Figure 4-9
4.
Clip in the other side by flexing the screen and pushing it
down into the provided cutout hole. See Fig. 4-10.
10
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Slide the hinge pin into the hole located on the mounting
tab, as in Fig. 4-12. Use the cut-out window (See inset in
Fig. 4-12) to line up the hinge pin on the other side and
push pin all the way in until it reaches the end-stop. At this
point the pin clips into place and is secured by a tab in the
bagger cover. See Fig. 4-13.
7.
Open Hood by pushing in on the rear, right-side tab with
your right hand, as seen in 1 of Fig. 4-14, and lifting the cover
with your left hand in the center rear of the bagger cover, 2.
2
1
Figure 4-14
8.
Install the bag assemblies onto the bag support brackets
by inserting the front edge in first, as seen in Fig. 4-15, and
setting the back edge down until it fits into the assembly.
Figure 4-12
1
2
Figure 4-13
Figure 4-15
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n
11
Download from Www.Somanuals.com. All Manuals Search And Download.
6.
Move the wood block to either the left or right blade for
stabilization and remove and replace the center blade so
that side of the blade with part number faces the ground
when the mower is in the operating position.
Attaching Blades
WARNING! Always protect your hands while
servicing blades by wearing heavy work gloves or
using heavy rags.
NOTE: Save the three blades you just removed to use as
replacements or to reinstall on the blade spindles when not
using the bagger kit.
NOTE: High-lift bagging blades are included in the grass-catcher
kit. Replace the blades with these new blades and save the
existing blades as replacements or to reinstall on the blade
spindles when not using the bagger kit.
Installing the Deck Baffle
Note: If the deck is still flipped upside down with the blades
exposed, it may be easiest to flip the deck back over to complete the
following installation of the deck baffle and chute stop bracket.
1.
Remove cutting deck from beneath the tractor following
instructions for Deck Removal in operator’s manual of the
tractor. Gently flip the deck over to expose its underside.
1.
Remove two of the self-tapping deck screws on the front
right side of your deck.
2.
Place a block of wood between the center deck housing
baffle and the cutting blade to act as a stabilizer. See
Fig. 4-16.
2.
Install the front deck baffle using the hardware pack 689-
00163 included with this bagger kit. See Fig. 4-17.
Wood Block
Note: This bagger kit includes two deck baffles, one baffle is
for the 50” deck and the other is for a 54” deck. Based on the
deck that you have, install one of the following baffles using the
directed hardware. The baffles may be identified by looking at
the parts list on Page 16:
Hex Flange Nut
•
50” Mowing Deck, install deck baffle Part No. 703-05783
using two 710-3015 1/4-20 hex bolts and 712-04064 1/4-20
flange lock nuts.
•
54” Mowing Deck, install deck baffle Part No. 703-06018A
using two 710-04484 self-tap hex bolts.
Hex Nut
Spindle Assembly
Figure 4-16
Deck Baffle
3.
Use a 15/16” wrench to remove the hex flange nut that
secures the blades to the blade spindle assemblies. See
Fig. 4-16.
WARNING! The hex flange nut has a right-handed
thread pattern. Do not attempt to force the nut in
wrong direction; it may damage the nut and create a
safety hazard.
Hex Bolt
50” Deck
4.
Place a new blade on each spindle so that side of the blade
with part number faces the ground when the mower is in
the operating position.
54” Deck
Figure 4-17
Note: This bagger kit includes two sets of blades, one set is
for the 50” deck and the other is for the 54” deck. Based on
the deck that you have, install one of the following blade
sets. The blades can be identified by the part number
stamped on each blade:
• 50” Mowing Deck, install Part No. 742-04056C
• 54” Mowing Deck, install Part No. 742-0679
5.
Secure with the hex flange nut removed earlier. Use a
torque wrench to tighten the hex flange nut between 70 to
90 foot-pounds.
12
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: An extra carriage bolt and lock nut have been
supplied in your bagger kit in hardware pack 689-00163.
You may replace the old hardware for the chute stop
bracket with this new hardware, or save for later use.
Installing the Chute Discharge Plate
1.
2.
3.
Remove the discharge chute by removing the two flange
lock nuts securing it.
With a hammer, lightly tap the bolts out. Discard the bolts
and flange lock nuts.
NOTE: This chute stop bracket may stay on the unit even
when the bagger is not being used.
Install the chute discharge plate to the bottom side of the
deck opening, as seen in Fig. 4-18, using two carriage bolts
supplied in hardware pack 689-00163.
Installing the Chute Strap on the Discharge Chute
Secure the strap to the chute with the hex screw (710-3015) and
flange nut (712-04064) provided In Hardware pack 689-00163.
See Fig. 20.
Figure 4-18
4.
5.
Replace the discharge chute and secure with two flange
lock nuts included in the hardware pack 689-00163.
Securely tighten the hardware at this time.
Figure 4-20
Attaching Chute Stop Bracket
Installing the Discharge Chute
1.
Remove the carriage bolt and lock nut holding the chute stop
to the deck. See the left Inset of Fig. 4-19. Save the hardware.
1.
Reinstall the cutting deck to the tractor reversing the
instructions for Deck Removal in operator’s manual of the
tractor.
2.
Raise the deck to its highest position.
3.
Raise the chute deflector (A in Fig. 4-21) on the deck and
hold it while you position the discharge chute over the
chute opening.
4.
Insert the hinge pin of the discharge chute into the tube on
the chute stop bracket. See B in Fig. 4-21.
A
C
Figure 4-19
2.
Install the new chute stop bracket, from the loose parts, at
the same position on the deck. See the right Inset of Fig.
4-19. Secure with the hardware removed earlier.
B
Figure 4-21
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
6.
Rotate the chute around the deck so that its front edge fits
snugly into the deck opening. Lower the chute deflector
slowly (C in Fig. 4-21).
8.
Peel the backing off of the self-adhesive foam strip (721-
04388) that has been included with your grass collector.
Apply it to the upper chute, flush against the flange as
shown in Fig. 24.
Attach the retainer strap on the discharge chute to the
retainer clip on the deck. Refer to Fig. 4-22.
Flange
Figure 4-22
Figure 4-24
Note: For the chute elbow to be properly installed, the bottom
edge must fall below the bottom of the deck opening and the
tab on top of the elbow should rest above the deck opening.
9.
With the bagger cover open, install the upper chute over
the chute adapter, and rest the top so that the chute
support sits in the upper chute groove. See Fig. 4-25.
7.
Install the chute adapter onto the chute elbow by lining up
the tabs and sliding the adapter over the chute elbow, as in
Fig. 4-23. Secure the chute adapter by installing two ratchet
clips (726-3046), included in hardware pack 689-00163, into
the holes provided.
Note: Make sure to align the upper chute with the ridges
on the bagger support bracket, as shown in the inset of
Fig. 4-25.
Figure 4-25
Figure 4-23
14
se c t i O n 4 — as s e M b l y & in s t a l l a t iO n
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
5
3.
Remove the grass bags, as shown in Fig. 5-2, by lifting each
bag up (1) and moving the bags away from the bag support
assembly (2).
Bagger Usage
NOTE: When all of the grass bags are full, place the tractor on a
firm, level surface, disengage the PTO, turn the tractor engine off
and set the parking brake.
1.
Flip Seat up.
2.
Lift up grass bag cover by pushing in on the rear, right-side
tab with your right hand, as seen in 1 of Fig. 5-1, and lifting
the cover with your left hand in the center rear of the bagger
cover, 2. Do not remove the chute tube assembly from the
tractor.
2
1
2
Figure 5-2
4.
5.
Empty the grass clippings at a proper disposal sight, use
the handle at the bottom of each grass bag. Holding the
bag firmly, empty the contents
1
Replace the grass bags in the reverse order and in the same
orientation in which they were removed, close lid, flip
down seat, restart your tractor and resume cutting your
grass.
Figure 5-1
15
Download from Www.Somanuals.com. All Manuals Search And Download.
19A40002100 Parts List
A
17
2
5
18
16
12
19
22
8
4
20
21
13
32
11
6
12
A
5
9
35
10
3
12
6
24
15
6
7
27
12
24
30
23
25
28
34
26
23
21
31
22
29
14
1
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Ref.
Part Number
Description
1.
931-04291
931-04298
731-06497
731-06504
710-0276
Upper Chute Assembly
2.
Triple Bagger Cover Assembly
Upper Chute Support
3.
4.
Bagger Cover Screen
5.
Carriage Screw, 5/16-18 x 1.00”
Hex Head Screw, 5/16-18 x .75”
Clevis Pin, .62” Dia.
6.
710-3008
7.
711- 0309A
964-04090A
683-04498A
683-04519
711-05079
712-04063
735-0246A
631-04493
683-0617A-0637
N/A*
8.
Grass-bag Assembly
9.
Triple Bag Support Assembly
Vertical Support Bracket
Cover Hinge Pin
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
34.
35.
Flange Lock Nut, 5/16-18
End Plug
Discharge Chute Elbow, 50/54” Deck
Chute Stop-Bracket
Hitch Bracket, RH
N/A*
Universal Rear Attachment Bracket
Hitch Bracket, LH
N/A*
703-05783-0637
703-06018A-0637
710-3015
Deck Baffle, 50”
Deck Baffle, 54”
Tap Screw, 1/4 - 20 x .750 (50” Deck)
Flange Lock Nut, 1/4 - 20 (50” Deck)
Carriage Screw, 3/8 - 16 x 1.00”
Flange Lock Nut, 3/8 - 16
Internal Cotter Pin, .148 x 3.00
Ratchet Clip, .250
712-04064
710-3168
712-04065
714 - 0117
726-3046
731- 06611
942-0679
Bagger Chute Adapter, 7 In.
Blade, 18.50 Lg., High Lift
Blade, 17.90 Lg., Star Bagging
Universal Bracket Support, RT-99/LT-5
Chute Strap
742-04056C-0637
783-05887-0637
723-0476
710-04484
689-00101
783-06694
721-04388
Tap Screw, 5/16-18 x .750 (54” Deck)
Mounting Bracket Kit (Incl. Ref. 16-18)
Discharge Chute Plate
Adhesive Foam Strip
*Order Reference No. 33
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
18
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CUB CADET LLC
MANUFACTURER’S LIMITED WARRANTY
FOR SEPARATELY SOLD ATTACHMENTS AND ACCESSORIES
IMPORTANT: To obtain warranty coverage owner may be required
a. Routine maintenance items such as lubricants, filters, blade
sharpening, tune-ups, brake adjustments, clutch adjustments, deck
adjustments, and normal deterioration of the exterior finish due to
use or exposure.
to present an original proof of purchase and applicable maintenance
records to the servicing dealer. Please see the operator’s manual for
information on required maintenance and service intervals.
The limited warranty set forth below is given by Cub Cadet LLC with
respect to new merchandise purchased or leased and used in the United
States and/or its territories and possessions, and by MTD Products
Limited with respect to new merchandise purchased or leased and
used in Canada and/or its territories and possessions (either entity
respectively, “Cub Cadet”).
b. Service completed by someone other than an authorized service
dealer.
c. Cub Cadet does not extend any warranty for products sold or
exported outside of the United States and/or Canada, and their
respective possessions and territories, except those sold through
Cub Cadet’s authorized channels of export distribution.
Cub Cadet warrants this product (excluding its Normal Wear Parts,
as described below) against defects in material and workmanship for
a period of two (2) years commencing on the date of original retail
purchase or lease and will, at its option, repair or replace, free of charge,
any part found to be defective in materials or workmanship.
d. Replacement parts and\or accessories that are not genuine Cub
Cadet parts.
e. Transportation charges and service calls.
f. Commercial or Institutional Use.
Normal Wear Parts are warranted to be free from defects in material and
workmanship for a period of thirty (30) days from the date of original
purchase or lease. Normal wear parts include, but are not limited to
items such as: belts, blades, blade adapters, grass bags, rider deck
wheels, seats, and tires.
There are no implied warranties, including without limitation any
implied warranty of merchantability or fitness for a particular
purpose. No warranties shall apply after the applicable period of
express written warranty above. No other express warranties beyond
those mentioned above, given by any person or entity, including a
dealer or retailer, with respect to any product, shall bind Cub Cadet.
The exclusive remedy is repair or replacement of the product as
set forth above. The terms of this warranty provide the sole and
exclusive remedy arising from the sale and/or lease of the products
covered hereby. Cub Cadet shall not be liable for any incidental or
consequential loss or damage including, without limitation, expenses
incurred for substitute or replacement lawn care services or for
rental expenses to temporarily replace a warranted product.
This limited warranty shall only apply if this product has been operated
and maintained in accordance with the Operator’s Manual furnished
with the product, and has not been subject to misuse, abuse, neglect,
accident, improper maintenance, alteration, vandalism, theft, fire, water,
or damage because of other peril or natural disaster. Damage resulting
from the installation or use of any part, accessory or attachment not
approved by Cub Cadet for use with the product(s) covered by this
manual will void your warranty as to any resulting damage. In addition,
Cub Cadet may deny warranty coverage if the hour meter, or any part
thereof, is altered, modified, disconnected or otherwise tampered with.
Some jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts, so the above exclusions or limitations may not apply to
you.
HOW TO OBTAIN SERVICE: Warranty service is available, WITH PROOF
OF PURCHASE AND APPLICABLE MAINTENANCE RECORDS, through
your local authorized service dealer. To locate the dealer in your area:
In no event shall recovery of any kind be greater than the amount of the
purchase price of the product sold. Alteration of safety features of the
product shall void this warranty. You assume the risk and liability for
loss, damage, or injury to you and your property and/or to others and
their property arising out of the misuse or inability to use the product.
In the U.S.A.:
Check your Yellow Pages, or contact Cub Cadet LLC at P.O. Box 361131,
Cleveland, Ohio 44136-0019, call 1-877-282- 8684
This limited warranty shall not extend to anyone other than the original
purchaser or to the person for whom it was purchased as a gift.
In Canada:
Contact MTD Products Limited, Kitchener, ON N2G 4J1, call 1-800-668-
HOW LOCAL LAWS RELATE TO THIS WARRANTY: This limited warranty
gives you specific legal rights, and you may also have other rights that
vary in different jurisdictions.
Without limiting the foregoing, this limited warranty does not provide
coverage in the following cases:
Cub Cadet LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019, Phone: 1-877-282-8684
MTD Products Limited, Kitchener, ON N2G 4J1, Phone: 1-800-668-1238
GDOC-100177 REV. A
Download from Www.Somanuals.com. All Manuals Search And Download.
|