Operator Owner's Manual
T h a n k Yo u f o r S e l e c t i n g
1
SV50, 50H
R
Quiet Vac
3
SPECIFICATION S
SV50
SV50H
ENG INE: H.P .
6.0 (4.47 Kw )
B&S INTEK
1.6q t. (1.5L)
5.5 (4.1kW)
HO NDA O HV
1.2q t. (1.1L)
ENG INE: TYPE
ENG INE: FUEL C AP.
ENG INE: O IL C AP.
WEIG HT: UNIT
WEIG HT: SHIPPING
ENG INE WEIG HT:
UNIT LENG TH
0.69q t. (0.65L) 0.63q t. (0.60L)
145# (65.8kg )
168# (76.2kg )
28# (12.7kg )
62" (1.57m )
153# (69.4kg )
176# (79.8kg )
36# (16.3kg )
62" (1.57m )
UNIT WIDTH
26.75" (0.68m ) 26.75" (0.68m )
42" (1.07m ) 42" (1.07m )
UNIT HEIG HT
ACCESSORIES
2
NOZZLE WEAR GUARD
CASTER KIT
(STANDARD)
HOSE KITS
(STANDARD)
P/N 890413. Extends nozzle life
when used along curbs and hard
surfaces.
For vacuuming in hard to reach areas.
P/N 890447 For use on hard
surface
Heavy Duty Vacuum Hose Kit P/N 900943.
4"(102mm) x 10' (3.05m)
BAG LINER OPTIONS (Samples supplied with unit)
Litter Liner P/N 890006
Felt Filter P/N 890435
Lawn Liner P/N 890009
For use in all dusty conditions. Can be
used with other liners
For use on hard surface where a variety of
debris is present.
Used to collect leaves, thatch & grass.
PACKA GED SINGLY
QTY 5 PER PA CKAGE
QTY 5 PER PA CKAGE
Part No. 890379
Form No. F081398A
Page 1 of 8
9
GENERAL SAFETY
For your safety and the safety of others, these directions should be followed:
Do not operate this machine without first reading
owner's manual and engine manufacturer's manual.
·DO NOT operate during excessive vibration.
·DO NOT remove bag until engine has been turned off and has
come to a complete stop.
·DO NOT remove hose kit cap on nozzle until engine has been
turned off and has come to a complete stop.
Use of Ear Protection is recommended while
operating this machine.
Use of Eye and Breathing protection is recom-
mended when using this machine, especially in dry
and dusty conditions. Debris bag directs dust toward
ground, away from the operator and the optional Felt
Filter reduces the amount of dust reintroduced into the
environment.
·DO NOT operate machine with hose cap, bag or hose removed.
·DO NOT use this machine for vacuuming exclusively sand,
dust, fine dirt, rock, glass, string like material, grain, rags,
cans, metal, bark or water.
·DO NOT operate this machine on slopes greater than 20%.
·DO NOT pick up any hot or burning debris, or any toxic or
explosive material.
·DO NOT place hands or feet inside nozzle intake opening,
near debris outlet or near any moving parts.
·DO NOT start engine without debris bag connected firmly in
place to exhaust outlet.
·DO NOT allow children to operate this equipment.
·DO NOT start or operate machine with debris bag zipper
open.
These items should be included in your carton. If any
of these parts are missing, contact your dealer.
11
PACKING CHECKLIST
Check
Check
Check
Check
Check
Check
Check
Debris Bag
890351
Literature Assy
890381
Honda Engine
Manual
Caster Kit
890447
Felt Filter Bag
890435
Litter Liner
890008
(3 EACH)
Lawn Liner
890431
(3 EACH)
LITERATURE ASSY P/N 890381
12
EU Declaration
of Conformity &
EU Distributor
List 890378
Lawn Liner
Installation
Instructions
890432
Litter LIner
Installation
instructions
890007
Check
Check
Check
Check
Check
Check
Owner's
Manual
890379
Literature
Accesso-
ries 890380
Warranty
Card 400972
15
13
14
ENGINE LABELS
CONTROLS
INSTRUCTION LABELS
These labels should be included on your Vacuum.
If any of these labels are damaged, replace them
before putting this equipment into operation. Item
and part numbers are given to help in ordering
replacement labels..
IN U.S.A. USE UNLEADED GASOLINE ONLY
Briggs &
Stratton
IMPORTANT ENGINE INFORMATION
BRIGGS & STRATTON
CORPORATION FAMILY
Throttle
Control
VBS190U1G1RB:EM
DISPLACEMENT 190cc. MODEL 12VOHV
THIS ENGINE CONFORMS TO 1995-1998 CALIFORNIA
EMISSION REGULATIONS FOR ULGE ENGINES AND
U.S. EPA PHASE 1 REGULATIONS FOR SMALL NON-
ROAD ENGINES. REFERS TO OWNER'S MANUAL
FOR MAINTENANCE SPECIFICATIONS AND
ADJUSTMENTS.
WARNING
EXPLOSIVE FUEL
STOP ENGINE AND ALLOW TO
COOL BEFORE REFUELING.
Honda
STOP
SLOW
Label Do Not Fill While
Engine Is Hot
Item 63 Part No.400268
Label Danger Keep Hands
and Feet Away
DANGER
Item 29 Part No.400424
FAST
Label Danger Flying Material
Item 62 Part No.810736
When servicing engine refer to specific manufacturers engine owner's
manual. All engine warranty is covered by the specific engine
manufacturer. If your engine requires warranty or other repair work
contact your local servicing engine dealer. When contacting a dealer
for service it is a good idea to have your engine model number
available for reference(See table above). If you can not locate a
servicing dealer in your area you can contact the manufacturers
national service organization.
Honda - Place
in fast position
to start.
Label Read Owner's
Label Ear Eye Breathing
Manual Item 84
To reach:
Item No. 86 Part No.
Part No.890301
890254
American Honda: 770-497-6000 Briggs & Stratton: 800-233-3723
Fax: 770-497-6011
Fax: 414-259-5249
Page 3 of 8
Part No. 890379
Form No. F081398A
Your Billy Goat is shipped from the factory in one carton, completely assembled except for the upper handle
and accessories. Included with machine are caster kit (890447), felt filter bag (1 each), lawn liner y (3 each),
and litter liner (3 each).
10
ASSEMBLY
Read all safety and operating instructions
before assembling or starting this unit.
1. REMOVE items 8 locknut & 74
screws from lower handle (item
27). Attach and securely tighten
upper handle item 6 to lower
handle as shown.
5.
1.
2.
SEE ENGINE MANUFACTURER'S
MANUAL (some engine manufac-
2. REMOVE deflector (item 83)
from box. Discard packing
tures' have different oil checking
PUT OIL IN ENGINE
procedures)
material. Remove carriage
BEFORE STARTING
bolts (item 31) and nut (item 4)
from deflector. Install to bag
plate (item 13) as shown
reusing parts removed (nut
6.
should be on side shown).
Failure to attach
deflector may result in
premature wear to bag.
7.
3. UNFOLD the debris bag (item
1) and fasten bag.
3.
5. CONNECT spark plug wire.
6. VERIFY fuel valve on.
4. ATTACH bag hanger strap to bag
supports (item 11), preassembled to
upper handle.
4.
4a. Bag hanger straps are designed
for adjustment when more clearance
is required between bag and
ground. Typically the bottom loop of
the strap is used when operating on
turf.
When using machine, make sure to clean out channel before re-
installing bag.
Page 4 of 8
Part No. 890379
Form No. F081398A
16
Operation
INTENDED USE: This machine is designed for vacuuming
leaves, grass clippings and other types of organic litter as
well as debris mixed with cans, bottles and small amounts
of sand; however, vacuuming cans, bottles and sand will
affect the longevity of your machine.
16.3
DEBRIS BAG
Debris bags are normal replaceable wear items.
Note: Frequently empty debris to prevent bag overloading with
more weight than you can lift.
Like all mechanical tools, reasonable care must
be used when operating machine.
Bag liners are included and available for use in various conditions
where debris will be vacuumed. (see Bag Liner Options shown on page 1).
Do not operate if excessive vibration occurs. If excessive
vibration occurs, shut engine off immediately and check for
damaged or worn impeller, loose impeller bolt, loose impeller
key, loose engine or lodged foreign objects. Note: See parts
list for proper impeller bolt torque specifications. (See trouble
shooting section on page 7).
DO NOT place bag on or near hot surface, such as engine.
Be sure engine has come to a complete stop
before removing or emptying bag!!
This vacuum is designed for picking up trash, organic
material and other similar debris (see Safety Warnings page 2-3).
Many vacuums are used where dust is mixed with trash. Your
unit can intermittently vacuum in dusty areas. However, following
these rules will help maintain your machine's ability to vacuum in
dusty conditions:
Inspect machine work area and machine before operat-
ing. Make sure that all operators of this equipment are
trained in general machine use and safety.
PUT OIL IN ENGINE BEFORE STARTING.
•Run machine at idle to quarter throttle.
•Machine or pressure-wash debris bag if normal cleaning does
not fully clean bag. Bag should be thoroughly dry before use.
16.1
STARTING
ENGINE: See engine manufacturer’s instructions
for type and amount of oil and gasoline used.
Engine must be level when checking and filling oil and
gasoline.
Having one or more spare Felt Filter (890435) is a good way to reduce
down time while dirty bags are being cleaned.
Do not store with debris in bag. Organic
debris generates heat during decomposi-
tion and could damage the bag or start a fire.
ENGINE SPEED: Controlled by throttle lever on the handle.
Under normal conditions, operate at minimum throttle to
accomplish your current cleaning task.
FUEL VALVE: Move fuel valve to "ON" position (Honda only).
CHOKE: Operated with throttle control (Honda).
Post to prime (Briggs & Stratton).
16.4
HANDLING & TRANSPORTING:
Using two people to lift machine is recommended. Lift holding the
handle and front of nozzle. Secure in place during transport.
NOTE: Outer bag and rod (items 1 and 3) MUST depress the
bag presence switch (item 17) for the unit to start. See fig.1
16.5
STORAGE
IF YOUR UNIT FAILS TO START:
See Troubleshooting on page 8.
Never store engine indoors or in enclosed poorly venti-
lated areas with fuel in tank, where fuel fumes may reach an
open flame, spark or pilot light, as on a furnace, water heater,
clothes dryer or other gas appliance.
16.2
VACUUMING OPERATION
VACUUM NOZZLE HEIGHT ADJUSTMENT: The
vacuum nozzle is raised and lowered by pulling slightly
upward on handle and pulling height adjust T-Handle (item
23) at operators left hand. Lift handle up or down to desired
height, then release T-handle.
If engine is to be unused for 30 days or more, prepare as
follows:
Be sure engine is cool. Do not smoke. Remove all
gasoline from carburetor and fuel tank to prevent gum deposits
from forming on these parts and causing possible malfunction
of engine. Drain fuel outdoors, into an approved container,
away from open flame. Run engine until fuel tank is empty and
engine runs out of gasoline.
FOR MAXIMUM PICKUP: Adjust nozzle height as
close to debris as possible, but without blocking airflow into the
nozzle. NOTE: Never bury nozzle into debris.
CLEARING A CLOGGED NOZZLE
NOTE: Fuel stabilizer (such as Sta-Bil) is an acceptable
alternative in minimizing the formation of fuel gum deposits
during storage. Add stabilizer to gasoline in fuel tank or
storage container. Always follow mix ratio found on stabilizer
container. Run engine at least 10 min. after adding stabilizer to
allow it to reach the carburetor.
& EXHAUST: Turn engine off and wait for impeller
to stop completely and disconnect spark plug wire.
Wearing durable gloves, remove clog. Danger, the
clog may contain sharp materials. Reconnect spark
plug wire.
16.10
COMPOST
Vacuumedleaves,grassandotherorganicmaterialfromyourown
yard can be emptied into a pile or composter to provide enriched
soil for later use as fertilizer in gardens and flower beds
Note: Allow green chips to dry before spreading around living
plants.
fig 1.
Page 5 of 8
Part No. 890379
Form No. F081398A
18
PARTS DRAWING
SV50, SV50H
Form No. F081398A
Page 6 of 8
Part No. 890379
item
SV50
Part No.
QTY
SV50H
Part No.
QTY
PARTS
LIST
OUTER DEBRIS BAG
THROTTLE CONTROL
ROD BAG
19
no.
1
2
3
4
5
6
7
8
890351
850270
890352
*8160001
*8041008
890439
890389
*8041031
900813
*900407
900039
890356
1
1
1
17
2
1
1
2
2
2
2
1
1
2
2
890351
850270
890352
*8160001
*8041008
890439
890389
*8041031
900813
*900407
900039
890356
1
1
1
17
2
1
1
2
2
2
2
1
1
2
2
NUT LOCK (1/4 - 20 )
SCREW CAP ( 1/4 - 20 x 1-1/2 HEX )
HANDLE UPPER ASS’Y (incl. items 4(4),5(2),45(2),11(2),75(2))
AXLE HEIGHT ADJUST
SCREW CAP 5/16 - 18 x 1-3/4
CLAMP CABLE 1" I.D.
* Denotes
standard
hardware
item that
may be
9
10 TY WRAP
11 BAR BAG SUPPORT
12 LATCH BAG
13 BAG PLATE
14 BRACKET HANDLE SV
15 BOLT CARR. 5/16 - 18 x 3/4 ZP
purchased
locally.
890355-S
890208
8024039
890355-S
890208
8024039
16
17 SWITCH PLUNGER
18 BRACKET - LOWER HEIGHT ADJUSTMENT
19 SCREW CAP 5/16 - 24 x 1"
20 SPRING-COMPRESSION
21 TIRE - ONLY (PER ASSY)
22 PIN - HAIR COTTER
23 CABLE HEIGHT ADJUSTMENT
24 BOLT - CARRIAGE 5/16 - 18 x 4 1/2
890440
890021
400164
900136
900507
900471
890019
*8024054
1
1
4
1
1
1
1
4
890440
890021
400164
900136
900507
900471
890019
*8024054
1
1
4
1
1
1
1
4
25
26 NUT LOCK 5/16 - 18 HEX
27 HANDLE LOWER
*8160002
890346
14
1
*8160002
890346
14
1
28 PLATE HANDLE SUPPORT
900933
1
900933
1
29 LABEL DANGER CUT FINGER
400424
2
400424
2
30 WASHER FLAT CUT 5/16
31 SCREW CARRAIGE 1/4-20 x 3/4
*8171003
*8024021
2
12
*8171003
*8024021
2
12
32
33 STRAIN RELIEF HAYCO 1244
34 WHEEL ASS’Y (incl. items 21)
35 WASHER 0.75 “C”
36 BOLT CARRAIGE 5/16 - 18 x 1" ZP
37 BRACKET CASTER RH
38 BRACKET CASTER LH
39 CASTER 4x2 SWIVEL
40 SCREW CAP 1/4 - 20 x 1 - 1/4
41 HARNESS ASSY
42 SCREW SELF TAPPING 10 - 24 x 1/2
43 NOZZLE MAINFRAME ASS’Y (incl. one of items 29,44,42)
44 PLUG HOUSING
500282
900509
900997
*8024040
890004
890002
890428
*8041007
890443
*8123086
890391
900146
*8041009
1
4
1 - 0
8
1
1
2
4
1
1
500282
900509
900997
*8024040
890004
890002
890428
*8041007
890442
*8123086
890391
900146
|