PR & OS Owner’s Manual
Patent 6253416
BILLY GOAT POWER RAKE AND OVERSEEDER
PR550, PR550H, PR550T, PR500HT, OS551, OS551H, PR600S, OS600S
Owner's Manual
Accessories
Replacement Parts
SLICING REEL
A complete verti-
slicing reel for your
PR. 20" wide reel for
use in grasses that
require vertical
SLICING BLADES
A full set of blades for
replacement. Includes
new lockwashers for
replacement
OVERSEEDER KIT
The new light weight Plastic Overseeding
Kit is constructed of durable High Density
Polypropylene with two lift handles on
each side to assist in lifting the entire unit
and easily converts a PR Series Power
Rake into an overseeder with 4 bolts and
minimal tools.
FLAIL SHAFTS
FLAIL BLADES
A complete set of
our high quality flail
blades for your PR.
Includes new lock
clips for
A full set of shafts
for replacement.
Includes new lock
clips for
replacement
installation.
installation.
cutting, and for
assisting in lawn
replacement
installation.
NOTE: Overseeder Conversion Kit
(350328) includes Slicing Reel (350343).
Part No. (350325) comes with the
Overseeder Box only.
overseeding projects.
P/N 350347
P/N 350325 / 350328
P/N 350185
P/N 350345
P/N 350186
Part No 350324
Form No F021108D
1
PR & OS Owner’s Manual
SERIAL PLATE DATA
Record the model number, serial number, date of
purchase, and where purchased.
Purchase Date:
Purchased From:
Specifications
PR550
PR550H
OS551
OS551H
PR550T
PR550HT
PR600S
OS600S
Engine: HP
5.5 (4.1 kW)
5.5 (4.1 kW)
5.5 (4.1 kW)
5.5 (4.1 kW)
5.5 (4.1 kW)
5.5 (4.1 kW)
6.0 HP (4.7kW)
6.0 HP (4.7kW)
Engine: Model
1104020191
B&S OHV
GX160T1QX2
HONDA OHV
3.88 qt. (3.6 L)
0.69 qt. (0.65 L)
147# (66.8 kg)
34# (15.4 kg)
20o
1104020191
B&S OHV
GX160T1QX2
HONDA OHV
3.88 qt. (3.6 L)
0.69 qt. (0.65 L)
160# (72.7 kg)
34# (15.4 kg)
15o
1104020191
B&S OHV
GX160T1QX2
HONDA OHV
3.88 qt. (3.6 L)
0.69 qt. (0.65 L)
137# (62.3 kg)
34# (15.4 kg)
20o
EX17D50012
SUBARU
EX17D50012
SUBARU
Engine: Type
Engine: Fuel Capacity
Engine: Oil Capacity
Total Unit Weight:
Engine weight:
3.0 qt. (2.84 L)
0.66 qt. (0.62 L)
149# (67.7 kg)
36# (16.3 kg)
15o
3.0 qt. (2.84 L)
0.66 qt. (0.62 L)
162# (73.6 kg)
36# (16.3 kg)
15o
3.0 qt. (2.84 L)
0.66 qt. (0.62 L)
139# (63.2 kg)
36# (16.3 kg)
20o
3.8 qt.(3.6 L)
0.63 qt.(0.60 L)
137# (62.3 kg)
34# (15.4 kg)
20o
3.8 qt.(3.6 L)
0.63 qt.(0.60 L)
137# (62.3 kg)
34# (15.4 kg)
20o
Max. operating slope
Sound test in accordance with
2000/14/EC
101 dB(a)
101 dB(a)
101 dB(a)
101 dB(a)
101 dB(a)
101 dB(a)
101 dB(a)
101 dB(a)
Sound at operators ear
82 dB(a)
82 dB(a)
82 dB(a)
3.2g
82 dB(a)
3.2g
82 dB(a)
3.2g
82 dB(a)
3.2g
82 dB(a)
3.2g
82 dB(a)
3.2g
Vibration at operator position
0.82g (8.04
m/s2)
0.82g (8.04
m/s2)
Part No 350324
Form No F021108D
3
PR & OS Owner’s Manual
GENERAL SAFETY INSTRUCTIONS and SYMBOLS
The safety symbols shown below are used throughout this manual. You should become familiar with them before
assembling, operating, or servicing this equipment.
This symbol indicates important information that will prevent injury to yourself or others.
This symbol indicates ear protection is recommended when operating this equipment.
This symbol indicates eye protection is recommended when operating this equipment.
This symbol indicates gloves should be worn when servicing this equipment.
This symbol indicates that this manual and the engine manufacturer’s manual should be read
carefully before assembling, operation, or servicing this equipment.
This symbol indicates important information that will prevent damage to your BILLY GOAT ®
Power Rake/Overseeder.
This symbol indicates the engine oil level should be checked before operating this
equipment.
Read and make sure you thoroughly understand the following safety precautions before assembling, operating or
servicing this equipment:
READ this manual and the engine manufacturer’s manual carefully before assembling,
operating, or servicing this equipment.
EAR PROTECTION is recommended when operating this equipment.
EYE PROTECTION is recommended when operating this equipment.
BREATHING PROTECTION is recommended when operating this equipment.
EXHAUST from this product contains chemicals known to the State of California to cause
cancer, birth defects or other reproductive harm.
DO NOT operate this equipment on any unimproved forested, brushy, or grass covered land
unless a spark arrester is installed on the muffler as required by Section 4442 of the
California Public Resources Code. The arrester must be maintained in good working order.
Other states may have similar laws. Federal laws apply on federal lands.
DO NOT run engine in an enclosed area. Exhaust gases contain carbon monoxide, an
odorless and possibly fatal poison.
Part No 350324
Form No F021108D
4
PR & OS Owner’s Manual
DO NOT run this equipment indoors or in any poorly ventilated area. Refueling outdoors is
recommended.
DO NOT refuel this equipment while the engine is running. Allow engine to cool for at least
two minutes before refueling.
DO NOT store gasoline near an open flame.
DO NOT remove gas cap while engine is running.
DO NOT start or operate engine if strong odor of gasoline is present.
DO NOT start or operate engine if gasoline is spilled. Move equipment away from spill until
gasoline has completely evaporated.
DO NOT smoke while filling the fuel tank.
DO NOT check for spark with spark plug or spark plug wire removed. Use an approved spark
tester.
DO NOT operate engine without a muffler. Inspect muffler periodically and replace if
necessary. If equipped with muffler deflector, inspect deflector periodically and replace if
necessary.
DO NOT operate engine with grass, leaves or other combustible material near the muffler.
DO NOT touch muffler, cylinder, or cooling fins when hot. Contact with hot surfaces may
cause severe burns.
DO NOT leave equipment unattended while in operation.
DO NOT park equipment on a steep grade or slope.
DO NOT operate equipment with bystanders in or near the work area.
DO NOT allow children to operate this equipment.
DO NOT operate equipment with guards removed.
DO NOT operate equipment near hot or burning debris or any toxic or explosive materials.
DO NOT operate equipment on slopes greater than specified in Specifications section of this
manual.
DO NOT start engine without height adjust lever in up position and clutch bail disengaged.
DO NOT place hands or feet underneath unit, or near any moving parts.
ALWAYS remove spark plug wire when servicing equipment to prevent accidental starting.
ALWAYS check fuel lines and fittings frequently for cracks or leaks. Replace if necessary.
ALWAYS keep hands and feet away from moving or rotating parts.
ALWAYS store fuel in approved safety containers.
WARNING: Important
Remove all rocks, wire, string, etc. that can present a hazard during work prior to starting.
DO identify and mark all fixed objects to be avoided during work such as sprinkler heads,
water valves, buried cables, or clothes line anchors, etc.
Part No 350324
Form No F021108D
5
PR & OS Owner’s Manual
SOUND
SOUND LEVEL 82 dB(a) at Operators Position
Sound tests were conducted in accordance with 2000/14/EC, and were performed on 2-13-2002 under the
conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on
the unit for the sound power level for your model.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Sunny
48oF (8.9oC)
2 mph (3.2 kmh)
South East
29%
Barometric Pressure:
30.34Hg (770 mm Hg)
VIBRATION DATA
VIBRATION LEVEL .82g (8.04m/s2)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using
calibrated vibration test equipment. Tests were performed on 5-25-2006 under the conditions listed below.
General Conditions:
Temperature:
Wind Speed:
Wind Direction:
Humidity:
Sunny
72.32oF (22.4oC)
3.8 mph (6.12kph)
East
62.2%
Barometric Pressure:
29.9Hg (101.3kpa)
INTENDED USE
INTENDED USE: This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to
assist in overseeding operations. The machine should not be used for any other purpose than that stated above.
Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check
for damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See trouble
shooting section on page 14).
Part No 350324
Form No F021108D
6
PR & OS Owner’s Manual
INSTRUCTION LABELS
®
The labels shown below were installed on your BILLY GOAT Power Rake/Overseeder. If any labels are damaged or missing, replace them
before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for convenience in ordering
replacement labels. The correct position for each label may be determined by referring to the Figure and Item numbers shown.
LABEL DANGER KEEP HANDS
AND FEET AWAY
LABEL CLUTCH ITEM #49
P/N 830503
DANGER FLYING DEBRIS
ITEM # 48 P/N 810736
ITEM #51 P/N 400424
LABEL CAUTION GUARDS
ITEM #52 P/N 900327
LABEL EXPLOSIVE FUEL
ITEM # 50 P/N 400268
LABEL INSTRUCTION HEIGHT ADJ.
ITEM #35 P/N 350176
LABEL INSTRUCTIONS SEEDER BOX
ITEM #45 P/N 350288
ENGINE LABELS
BRIGGS & STRATTON
HONDA
OIL ALERT
WHEN OIL LEVELLOW,
ENGINE STOPS IMMEDIATELY.
ENGINE CONTROLS
Honda
Briggs & Stratton
Set lever to choke when starting cold
Throttle lever
Choke lever
Set lever to desired engine speed.
Move lever completely to the left to
stop engine
Fuel valve
Part No 350324
Form No F021108D
7
|