Parts Manual for
TM
OUT FRONT Z-RIDER
ZERO TURNING HYDRO DRIVE
SERIES 0
POWER UNIT MODELS
ZF2200K
ZF2500K
ZF2500KH
MOWER UNIT MODELS
ZF6100M
ZF5200M
ZF7301M
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
(REV 4, 9/30/02)
MANUAL No. 06106
Download from Www.Somanuals.com. All Manuals Search And Download.
FUEL TANK ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
1-3847
5-4098
3-5504
5-4119
9-1640
9-1299
1-2222
3-5853
4-4777
4-5282
RETAINER, 3/8 Bolt (2)
TANK, Fuel (Includes item 4)
BRACKET, Fuel Tank Support
ASSEMBLY, Cap/Gauge
BOLT, 3/8-16 x 1” Carriage, Grade 5 (3)
NUT, 3/8-16 Nyloc (3)
CLAMP, Fuel Hose (4)
HOSE, Fuel 1/4 x 4”
FILTER, Fuel
HOSE, Fuel 1/4 x 24”
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ENGINE SUB-ASSEMBLY
ITEM
1
--
2
3
4
5
6
7
PART NO.
---
DESCRIPTION
ENGINE, 22 HP (Kohler Part No. CH22S PS-66536)
ENGINE, 25 HP (Kohler Part No. CH25S PS-68577)
CLAMP, Fuel Hose (2)
OIL DRAIN, Short
ASSEMBLY, Oil Valve
CLUTCH, Electric, Commercial Magstop
SPACER, Clutch
BRACKET, Anti-Rotation (5/16”)
HOSE, Fuel 1/4 x 4”
NUT, 3/8-16 Nycloc (4)
WASHER, 7/16” Split Lock (2)
---
1-2222
2-2486
2-7972
3-5520
3-5675
3-5852
3-5853
9-1299
9-1301
9-1304
1-4359
9-1553
9-1806
9-1807
9-1808
9-1840
4-2707
9-1839
---
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5
FILTER, Fuel (in-line)
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5 (4)
SCREW, 7/16-20 x 1-1/2” Hex Head Cap Grade 5
WASHER, 15/32 I.D. x 1-3/8 O.D. x 1/4 Flat
SCREW, 7/16-14 x 1”, Grade 5
SCREW, M5 x 10mm Pan Head Cap (2)
GUARD, Muffler
SCREW, M5 x 16mm Hex Head Self Tapping (2)
MUFFLER, 22 HP (Kohler Part No. A-24 068 00)
BRACKET, Muffler
SCREW, M6 x 12.5mm Hex Flange Cap (2)
BRACKET, Muffler 25 HP Kohler
SHIELD, Heat 25 HP Kohler
MUFFLER, 25 HP (Kohler Part No. A-24 068 17)
SPACER, Muffler Guard
4-2708
9-1838
4-6486
4-6487
---
7-2256
7-2155
GUARD, Muffler “Snapper”
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
4
Download from Www.Somanuals.com. All Manuals Search And Download.
AIR INTAKE ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
2
3
4
5
2-3295
3-5767
3-5768
9-0361
9-1787
U-NUT, 1/4-20 (3)
SCREEN, Air Intake
MOUNT, Air Intake
SCREW, 5/16-18 x 5/8” Hex Fl. Self-Tap (2)
SCREW, 1/4-20 Hex Flange Lock (3)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM HYDRO TRANSAXLE ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TANDEM HYDRO TRANSAXLE ASSEMBLY
ITEM
1
PART NO.
1-0935
1-2709
1-4264
1-5894
1-8978
2-7175
2-7223
9-1814
3-5522
5-8190
3-5521
5-8190
3-5547
3-5634
3-5910
3-5915
3-5923
3-5925
3-5927
4-2612
4-2639
5-4293
1-5753
9-0201
9-1299
9-1514
9-1603
9-1627
9-1629
9-1786
9-1787
9-1811
9-1812
9-0505
3-5914
3-5916
9-1605
4-2715
DESCRIPTION
WASHER, 3/4 I.D. x 1-1/8” O.D. Flat (7)
RETAINING RING, 1” External (2)
WOODRUFF KEY, #404 (2)
2
3
4
WOODRUFF KEY, #605 (2)
5
FAN, 10 Blade 7” Dia. (2)
6
BOLT, 5/16-18 x 2-1/2” Hex Head (2)
WASHER, 1/4 Split Lock (4)
7
8
SCREW, 1/4-20 x 1-1/4”, Hex Head Cap (3)
ASSEMBLY, Transaxle 771B (R.H.) Side (shown)
same as above but with 25 PSI bypass filter
ASSEMBLY, Transaxle 771A (L.H.) Side
same as above but with 25 PSI bypass filter
PULLEY, Transmission Input (2)
SPACER, Transaxle (2)
9
--
--
--
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
PLATE, Neutral Adjust (2)
SPRING, Neutral Return Adjust (2)
SPACER/ADAPTER, Fan
ROD, Roll Release (2)
SPRING, Neutral Return (2)
SPACER, Fan (Weldment) (2)
CAM, Neutral Return (Weldment) (2)
PLATE, Neutral Return (Weldment) (2)
BALL-JOINT (4)
SET SCREW, 5/16-18 x 5/16” Hex Recess (4)
NUT, 3/8-16, Hex Nyloc (4)
WASHER, 13/32 I.D. x 13/16 O.D. Flat (4)
NUT, 1/4-20 Hex Nyloc (8)
WASHER, 1/4 I.D. x 1” O.D. (2)
COTTER-PIN, 1/16 x 1/2” (2)
BOLT, 3/8-16 x 4-3/4” Grade 5 (4)
SCREW, 1/4-20 x 5/8”, Hex Flange Lock, Grade 5 (8)
BOLT, 5/16-18 x 5/8”, Hex Flange Lock (4)
NUT, 1/4-28, Hex Nyloc (4)
SCREW, 1/4-20 x 2”, Hex Head Cap, Grade 5
ROD, Threaded 1/4-28 x 5-3/8”
ROD, Threaded 1/4-28 x 4-3/8”
NUT, 1/4-28 Hex, Grade 5 or B (4)
FILTER, Oil (EATON No. 103144)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
7
Download from Www.Somanuals.com. All Manuals Search And Download.
DRIVE TIRE/WHEEL ASSEMBLY
ITEM
1
PART NO.
DESCRIPTION
5-4109
5-4510
5-4110
4-4707
5-4111
1-2234
2-7192
5-4461
9-1793
9-1778
9-1978
9-1828
ASSEMBLY, Rear Tire & Rim (Includes Item 2A, 3 & 4)
ASSEMBLY, Rear Tire & Rim (Includes 2B , 3 & 4)
TIRE, 20 x 10.00-8 4 ply “Multi-trac C/S”
TIRE, 21 x 11.00-8 “All Terrain 101”
RIM, 8” Dia. X 7-3/4”
--
2A
2B
3
4
VALVE, Air
5
NUT, 1/2-20 Lug (5)
6
ASSEMBLY, Wheel Hub
7
PIN, Cotter, 9/64 x 1-1/2
8
KEY, #808 Woodruff
--
KEY, #806 Woodruff
9
NUT, 3/4-20 Slotted Hex
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FOOTREST ASSEMBLY
ITEM
PART NO.
2-2696
2-8810
3-5849
9-1602
3-5855
3-5978
3-5979
4-2630
9-1296
9-1298
DESCRIPTION
1
2
3
4
5
6
7
8
9
10
SPRING
BUSHING, 5/16 I.D. x 7/16 O.D. x 3/16 (2)
BOLT, 1/2-13, 3/4 Dia. X 1-1/16 Shoulder (2)
BOLT, 5/16-18 x 1-1/2 Hex Flange Lock, Grade 5 (2)
FOOT PAD, Rubber
PLATE, Footrest Latch
SPACER, Shoulder (Latch)
FOOTREST (Weldment)
WASHER, 11/32 I.D. x 11/16 O.D. x 1/16” Flat (2)
NUT, 5/16-18 Nyloc (3)
11
--
9-1325
9-1894
NUT, 1/2-13 Nyloc (2)
NUT, 1/2-13 Hex Center Lock, Grade 5 (2)
12
13
9-1331
9-1591
WASHER, 13/32 I.D. x 1-1/2 O.D. x 1/8” Flat
BOLT, 5/16-18 x 1 Hex Flange Lock, Grade 5
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
9
Download from Www.Somanuals.com. All Manuals Search And Download.
HYDRO RESERVOIR ASSEMBLY
ITEM
1
2
3
4
5
--
6
--
7
8
9
10
11
PART NO.
1-6130
9-1298
3-5514
3-5515
3-5516
4-1834
3-5517
4-1833
3-5639
5-4703
5-4103
9-1296
3-5512
DESCRIPTION
CLAMP, Hose 13/16” (8)
NUT, 5/16-18 Nyloc (2)
HOSE, Rubber R.H. Front (.625 I.D. x 13-1/2” Long)
HOSE, Rubber R.H. Back (.625 I.D. x 16” Long)
HOSE, Rubber L.H. Front (.625 I.D. x 24” Long)
HOSE, Rubber (.625 I.D. x 34” Long)
HOSE, Rubber L.H. Back (.625 I.D. x 18” Long)
HOSE, Rubber (.625 I.D. x 6” Long)
BRACKET, Reservoir (2)
RESERVOIR, L.H. Hydro (includes cap, item 11)
RESERVOIR, R.H. Hydro (includes cap, item 11)
WASHER, 11/32 I.D. x 11/16” O.D. (2)
CAP, Reservoir
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
10
Download from Www.Somanuals.com. All Manuals Search And Download.
UPPER CHASSIS AND SEAT LATCH ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
2
3
4
5
6
4-2601
1-3874
3-5993
1-5761
2-6292
9-1298
UPPER CHASSIS
BUSHING, 5/8” PM (2)
LATCH, Seat Support
BOLT, 5/16-18 Shoulder
SPRING
NUT, 5/16-18 Hex Nyoc
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LOWER CHASSIS/CASTER WHEEL-ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
12
Download from Www.Somanuals.com. All Manuals Search And Download.
LOWER CHASSIS/CASTER WHEEL-ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
3-6406
1-4432
2-9074
3-5468
3-5469
3-5476
3-5602
3-5638
3-5822
3-5823
4-2589
4-2590
4-2591
4-2628
4-2629
5-4087
3-5474
3-5475
2-8722
1-2234
1-2700
1-0965
9-1299
9-1325
9-1514
9-1598
9-1773
9-1786
9-1790
9-1795
9-1328
9-1595
9-1640
3-6578
9-0361
4-2777
9-1299
BRACKET, Battery Support
SPRING (2)
2
3
PIN, Clevis 1/2 x 4” (2)
4
SKID GUARD, R.H.
5
SKID GUARD L.H.
6
SLEEVE, Axle
7
BEARING, 30mm x 62mm (2)
J-CLIP, Open Cushoned (2)
COUNTERWEIGHT, Large (3)
COUNTERWEIGHT, Small
CHASSIS, Lower
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
SUPPORT, Caster
YOKE, Caster
PLATE, Hitch (2)
PIN, Hitch (2)
ASSEMBLY, Tire & Rim (includes Iitems 17 thru 21)
TIRE, 13 x 5.00-6 4 Ply
RIM
BEARING (2)
VALVE, Air
FITTING, Lube
RING, 1-3/16” External Retaining
NUT, 3/8-16 Hex Nyloc (20)
NUT, 1/2-13 Nyloc
WASHER, 13/32 I.D. x 13/16 O.D., Flat (2)
PIN, Cotter, 1/8 x 3/4” (4)
SCREW, 1/2-13 x 7-1/4, Grade 5
BOLT, 3/8-16 x 4-3/4”, Grade 5 (2)
BOLT, 3/8-16 x 1-1/4”, Carriage, Grade 5 (8)
WASHER, 1-1/4 I.D. x 1-7/8 O.D. Flat
SCREW, 3/8-16 x 1-1/4”, Hex Hd. Cap, Gr. 5 (8)
WASHER, 15/32 I.D. x 15/16” O.D., Flat (4)
BOLT, 3/8-16 x 1” Carriage, Grade 5 (2)
CAP, Caster Shaft
SCREW, 5/16-18 x 5/8” Self Tapping
SHIELD, Grass
NUT, 3/8-16 Hex Nyloc (2)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
13
Download from Www.Somanuals.com. All Manuals Search And Download.
JOYSTICK CONTROL ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
14
Download from Www.Somanuals.com. All Manuals Search And Download.
JOYSTICK CONTROL ASSEMBLY
ITEM
PART NO.
1-3072
2-3656
3-5532
3-5533
3-5897
3-5898
4-2599
4-2638
5-4237
DESCRIPTION
1
2
3
4
5
6
7
8
9
ROLL PIN, 1/4 x 1” (8)
HANDLE, Plastic
BRACKET, Joystick Mounting
BLOCK, Pivot J’Stick Control
SHAFT, Upper Cross
SHAFT, Lower Cross
HANDLE, Joystick Control (Weldment)
ARM/HUB Weldment (4)
ASSEMBLY, Cross Shaft Support (includes
one 9A and two 9B)
9A
9B
10
11
12
13
14
15
16
17
18
19
20
21
4-2623
1-3874
3-5908
3-5909
9-0844
9-1298
9-1508
9-1523
9-1628
9-1800
9-1812
9-1816
9-1605
1-5753
SUPPORT, Cross Shaft (Weldment)
BUSHING (2)
ROD, Threaded 1/4-28 x 2.71 long
ROD, Threaded 1/4-28 x 3.85 long
ROLL PIN 3/16 x 3/4”
NUT, 5/16-18 Hex Nyloc (3)
BOLT, 5/16-18 x 3/4” Sq.Nk. Carriage, Grade 5 (3)
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap (2)
WASHER, 41/64 I.D. x 1” O.D. Flat (4)
BOLT, 5/16-18 Shoulder (4)
NUT, 1/4-28 Hex Nyloc (4)
ROLL PIN, 1/4 x 2-3/4”
NUT, 1/4-28 Hex, Grade 5 or B (4)
BALL-JOINT (4)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PARKING BRAKE ASSEMBLY
ITEM
PART NO.
1-2068
DESCRIPTION
1
2
RING, Rear Lift Arm
GRIP, Flat Bar
2-6420
3
--
2-8200
4-6451
SWIVEL, Adjustable (5/16-18 thread)
SWIVEL, Adjustable (3/8-24 thread)
4
3-4453
4-6456
3-5888
3-6399
4-6469
4-2635
4-2647
4-2648
WASHER, 3/4 I.D. x 1-1/2 O.D. x 9/64” Flat
ARM, Brake Lift (3/8-24 thread)
ROD, Hydrostatic Brake (1/4-28 thread) (2)
SLEEVE Bearing, 1/2 I.D. x .629 (2)
ARM, Parking Brake
5
6
7
8
9
SHAFT, Brake
10
11
BRACKET, Joystick Lockout
PLATE, Support
12
--
9-1313
9-1597
COTTER PIN, 3/32 x 1” (6)
COTTER-PIN, 3/32 x 3/4” (6)
13
14
15
16
17
18
19
9-1514
9-1523
9-1605
9-1809
1-4001
9-1812
9-1832
WASHER, 13/32 I.D. x 13/16 O.D. x 5/64 Flat (3)
SCREW, 5/16-18 x 5/8” Hex Washer Face Self-Tap (3)
NUT, 1/4-28 Hex, Grade 5 (2)
COTTER PIN, 1/8 x 1-1/4”
PIN, Roll 1/8 x 3/4”
NUT, 1/4-28 Hex Nyloc (2)
SWIVEL, 1/4” Smooth (2)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT SUPPORT ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
PART NO.
9-1503
1-7590
1-9035
3-6492
2-2793
2-2794
2-3606
3-3362
3-5827
3-5828
3-5839
9-1046
9-1296
9-1298
9-1508
DESCRIPTION
HAIRPIN, 3/32 x 1-1/2 (2)
SWITCH, Seat (Normally Open)
ROD, 5/16 x 13” Long
SPRING, .106 Wire Dia., .68 I.D. x 1-1/2” (2)
BUSHING, Molded Seat, 1/2 I.D., 5/8” O.D. (2)
SPACER, .31 I.D., 1-3/8” Long (2)
CAP, Vinyl, 1/4 I.D., 1/5 O.D. (2)
HOLDER, Seat Switch
PLATE, Seat Support
BRACKET, Lower Seat Hinge
BRACKET, Upper Seat Support Hinge
SCREW, 5/16-18 x 2-1/2” Hex Head Cap, Grade 5 (2)
WASHER, 5/16 x 11/16 O.D. Flat (2)
NUT, 5/16-18 Hex Nyloc (16)
9
10
11
12
13
14
15
BOLT, 5/16-18 x 3/4 Short Neck. Carriage, Grade 5 (6)
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
18
Download from Www.Somanuals.com. All Manuals Search And Download.
FENDER/CONTROL CABLE ASSEMBLY
ITEM PART NO.
DESCRIPTION
1
2
3
4
5
6
7
8
2-3655
3-5548
3-5701
3-5940
4-2642
4-2643
3-5837
9-0913
9-1017
9-1523
9-1787
9-1018
3-5838
9-1130
LEVER, Throttle Control (2)
HANDLE, 5/8” Tubing
PANEL, Console
PLATE, Joystick Control
FENDER, R.H.
FENDER, L.H.
CABLE, Choke, Kohler
SCREW, #10-24 Hex Washer Face Self-tap (8)
SCREW, #8-32 x 3/8”Machine (2)
SCREW, 5/16-18 x 5/8” Hex Washer Face Self-tap (15)
SCREW, 1/4-20 x 5/8” Hex Flange Lock (3)
NUT, #8-32 Hex (2)
9
10
11
12
13
14
CABLE, Throttle, Kohler
WASHER, 5/16 I.D. Flat (2)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
19
Download from Www.Somanuals.com. All Manuals Search And Download.
UPPER DRIVE SHAFT ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
20
Download from Www.Somanuals.com. All Manuals Search And Download.
UPPER DRIVE SHAFT ASSEMBLY
ITEM
PART NO.
1-4338
DESCRIPTION
DISC, Flexible
1
2
1-4803
SPACER, LT16 (2)
3
--
1-8547
1-4268
BEARING, 3/4” (includes collar, Part No. 1-4625))
BEARING, 3/4” (w/o collar)
4
5
6
7
8
1-8626
3-2070
3-5544
9-1803
3-5564
HUB, Drive Shaft Adapter
WASHER, 13/32 I.D. x 3/4 O.D., Flat (4)
BELT, 36-1/2” (2)
KEY, 3/16 Square x 1-1/2” Long
PULLEY, Cast Iron Dual V 4.95 Effective O.D. (includes
two of item 17)
9
3-5811
9-0848
9-1298
9-1299
DRIVE SHAFT, 3/4”
10
11
12
SET SCREW, 5/16-18 x 1/2” Square Head Cup Point (2)
NUT, 5/16-18 Hex Nyloc (3)
NUT, 3/8-16 Hex Nyloc (2)
13
--
9-1304
9-1328
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (2)
SCREW, 3/8-16 x 1-1/4” Hex Head Cap, Grade 5 (2)
14
15
16
17
9-1320
9-1497
9-1508
9-1802
WASHER, 3/8 Split Lock (2)
SCREW, 3/8-16 x 1-1/2” Hex Head Cap, Grade 5 (2)
BOLT, 5/16-18 x 3/4”, Carriage, Grade 5 (3)
SCREW, 5/16-18 x 5/8”, Socket-Head (2)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK DRIVESHAFT ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
22
Download from Www.Somanuals.com. All Manuals Search And Download.
DECK DRIVESHAFT ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
1-2315
KEY, 1/4” Square x 2”
2
--
1-3864
1-3324
FITTING, Lube (straight, for 3/16” hole)
FITTING, Lube (45 degree, for 3/16” hole)
3
1-4409
BUSHING (2)
4
--
1-8504
1-4266
BEARING, (includes item 25) (2)
BEARING, 1” Bore (w/o collar) (2)
5
--
9-1810
9-0990
BOLT, 3/8-16 x 1-3/4” Carriage, Grade 5
BOLT, 3/8-16 x 2” Carriage, Grade 2
6
3-5530
3-5531
3-5543
3-5713
3-5816
3-5867
4-2610
DRIVE SHAFT, Deck (1” Diameter, 15 Spline)
PULLEY, Double V (5.45 O.D., A Section)
BELT, Deck Drive (HA 36.5) (2)
SPRING, Tension
7
8
9
10
11
12
PIN, 3/8-24 UNF
FLAT IDLER, 2.75 O.D. x 1-1/4” Wide
BEARING MOUNT (Weldment)
13
--
4-2626
4-2622
IDLER ARM, Offset (Weldment)
IDLER ARM, Straight (Weldment)
14
15
16
17
18
19
20
21
22
23
24
25
9-0776
9-0954
9-1298
9-1299
9-1508
9-1514
9-1518
9-1598
9-1787
2-7181
9-1804
1-4265
SET SCREW, 1/4-20 x 1/4” Cone Point (2)
SET SCREW, 5/16-18 x 5/16 Type C (2)
NUT, 5/16-18 Hex Nyloc (6)
NUT, 3/8-16 Hex Nyloc (5)
BOLT, 5/16-18 x 3/4, Grade 5 (6)
WASHER, 13/32 x 13/16 Flat
NUT, 3/8-24 Hex Nyloc
COTTER-PIN, 1/8 x 3/4”
SCREW, 1/4-20 x 5/8”, Hex Flange Lock, Grade 5 (16)
BOLT, 3/8-16 x 1-1/4” Carriage, Grade 5 (4)
WASHER, 9/16 Flat
COLLAR, Lock 1” (with 1/4” Set Screw)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CUTTER HOUSING ASSEMBLY
2
15
7A, 7B
4
14
18
6
17
3
12
1
13
7C
8
9
7D
11
16
5
10
*NOTE: for bearing pre-
seal kit (6-3240) installation,
discard item 3 and replace
with items 17 and 18 as
shown.
1
ITEM
1
2
3
4
PART NO.
2-9422
2-9270
2-9274
2-9253
2-9254
2-9271
2-9251
2-9246
1-7081
4-6625
1-6440
2-9256
2-9275
2-9252
2-9384
2-9302
2-9249
9-1736
9-1299
6-3238*
1-3370*
DESCRIPTION
BEARING, Sealed (2)
WASHER, Spindle
SNAP-RING, Spindle Shaft
SHAFT, Spindle
SPACER, Bearing
SPACER, Blade (4)
5
6
7A
7B
7C
7D
8
BLADE, 21” (61” Deck) (High Lift)
BLADE, 18” (52” Deck)
BLADE, 21” (61” Deck) (Low Lift)
BLADE, 25” (73” Deck)
WASHER, Beveled
9
BOLT, 5/8-18 x 7-1/2” Hex Head Cap, Grade 5
FITTING, Lube
10
11
12
13
14
15
16
17
18
HOUSING, Cutter
VENT, Spindle
BOLT, 3/8-16 x 1-1/4” Rib Necked (6)
PULLEY, 5-3/4” O.D. (61” Deck)
NUT, 5/8-18 Hex Flange Lock, Grade 5
NUT, 3/8-16 Hex Nyloc (6)
SEAL, Nylos
WASHER
NOTE: Part Number 5-4017 (Spindle Housing sub-assembly) is comprised of items 11
and 12 (one each) as well as item 13 (six each).
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TRACTION DRIVE IDLER ASSEMBLY
ITEM
1
PART NO.
1-3864
1-3324
1-4409
1-8573
1-9109
1-9348
9-1804
3-5713
3-5812
3-5816
4-2622
9-1299
9-1518
9-1553
9-1560
9-1598
3-6562
DESCRIPTION
FITTING, Lube (straight, for 3/16” hole) (2)
FITTING, Lube (45 degree, for 3/16” hole) (2)
BUSHING, 9/16 I.D., 3/4” O.D. (4)
PULLEY, Idler 3.48 O.D. A Section (2)
COVER, Spring (Rubber) (2)
CLIP, Seat Cushion (2)
--
2
3
4
5
6
WASHER, 9/16 Flat (Type B) (4)
SPRING, Torsion
SPACER, 3/8 I.D. 5/8 O.D. x 5/8” Long
PIN, 3/8-24 (2)
IDLER ARM (Weldment) (2)
NUT, 3/8-16 Hex Nyloc (2)
NUT, 3/8-24 Hex Nyloc (2)
7
8
9
10
11
12
13
14
15
16
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5
SCREW, 3/8-16 x 2-1/4” Hex Head Cap, Grade 5
COTTER PIN, 1/8 x 3/4” (2)
SPRING, Torsion
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
25
Download from Www.Somanuals.com. All Manuals Search And Download.
DECALS
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
26
Download from Www.Somanuals.com. All Manuals Search And Download.
DECALS
ITEM
PART NO.
3-5848
3-5847
3-5844
3-5846
1-3010
2-2522
2-9470
DESCRIPTION
1
2
3
4
5
6
7
LOGO, Front 16.33” Long
LOGO, Side 24.5” Long
DECAL, Throttle/Choke
DECAL, Fuse
DECAL, Warning (CPSC Cut-Finger)
DECAL, Warning
DECAL, Patent Numbers
8
--
--
4-4793
4-4794
4-6371
DECAL, 52” Deck (not shown)
DECAL, 61’ deck (not shown)
DECAL, 73” Deck
9
2-9295
3-5843
DECAL, Height-of-Cut
DECAL, Control Panel
10
11
--
1-9294
4-4640
DECAL, Nameplate Snapper
DECAL, SNAPPER
12
13
14
15
4-4677
4-1983
4-5107
2-4156
DECAL, Name ZF2200K
DECAL, Danger (Rotating Parts)
DECAL, Parking Brake
DECAL, Caution
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
27
Download from Www.Somanuals.com. All Manuals Search And Download.
52” MOWER DECK ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
28
Download from Www.Somanuals.com. All Manuals Search And Download.
52” MOWER DECK ASSEMBLY
ITEM
PART NO.
DESCRIPTION
ITEM
PART NO.
DESCRIPTION
1
4-2898
WELDMENT, 52” Deck-
Adjustable Height
39
7-6998
FITTING, Lube1/4-28
Straight (3)
2
3
4
5
4-6728
2-3735
2-9303
9-1299
COVER, 52” Deck
KNOB (5)
STANDOFF, 3-1/2” (5)
NUT, 3/8-16 Hex Nyloc
(23)
40
41
42
43
3-6444
4-2655
4-2653
2-9355
ARM, Lower Caster (2)
ARM, Caster Support L.H.
ARM, Caster Support R.H.
BOLT, 1/2-13 x 3-3/4”, Hex
Head, Grade 5 (6)
6
7
8
9
4-2776
1-0008
3-6447
9-1802
V-Belt, 52”(122”) HB
KEY, #6 Woodruff
44
9-1821
BOLT, 1/2-13 x 3” Hex
Head (3)
WELDMENT, Caster
SCREW, 3/8-16 x 1-1/4”
Hex Head Cap, Grade 5
SLEEVE, Axle
SCREW, 1/2-13 x 5-1/2”,
Hex Head Cap, Grade 5(2)
SPACER, PM
BUSHING, Machine
PIN, 7/16” HD Lynch
GEARBOX, Right Angle
BOLT, 1/2-13 x 5” Hex
Head Cap, Grade 5 (5)
PULLEY, Cast 5-3/4” O.D.
SHIM, Gearbox
MOUNT, Motor (Front)
SCREW, 5/16-18 x 5/8”
Set, Yellow Zinc (2)
SET SCREW, 3/8-16x3/8” (2)
SCREWJACK, Warner
Electric 1000 lbs.
DEFLECTOR, Chute 52”
(Weldment)
PIN, Chute Hinge
PIN, 3/32 x 1” Cotter
SPRING, Chute
BAFFLE, Front (2)
KEY. #9 Woodruff
WASHER, 13/32 x 1-1/2”
Flat (8)
45
46
4-2780
9-1328
10
11
9-0132
3-6448
47
48
2-2151
9-1326
12
4-2903
49
50
51
52
53
2-1960
2-3747
1-7711
3-6451
9-1822
13
14
15
16
17
18
2-9277
9-1313
2-7950
4-2914
1-0211
9-1331
54
55
56
4-2867
3-6455
4-2657
TUBE, Jack stand
19
9-1304
SCREW, 3/8-16 x 1”, Hex
Head Cap, Grade 5 (21)
SPACER, Motor, Rear (2)
LINK, Weldment L.H.
LINK, Weldment R.H.
LINK, Height of Cut (2)
SPACER, Tube (2)
HOLDER, Pivot (2)
MOUNT, Roller L.H.
MOUNT, Roller R.H.
TUBE, Roller
(Weldment)
57
58
4-2658
9-1544
WELDMENT, Jack Stand
NUT, 1/2-13 Hex Flange
Lock, Grade 5 (2)
BOLT, 1/2-13 x 1-1/4” Hex
Flange Lock, Grade 5 (2)
BRACKET, Strain Relief
RELIEF, Strain (see page
32)
HARNESS, Deck Lift
BRACKET, Gage Wheel (2)
INDICATOR, Height-of-Cut
ASSEMBLY, Telescoping
Drive shaft
WASHER, 5/8” Flat (2)
PIN, 5-16 Lynch
BALLJOINT, 1/2-20 (2)
SPACER
SCREW, 3/8-24 x 1”, Gr. 5
ASSEMBLY, Wheel/Tire
TIRE, 9” x 3.50” -4 Ply
VALVE, Air (Snap-In)
RIM
GREASE, Multi-Purpose
SCREW, 1/2-20x 4-1/2” (4)
NUT, 1/2-20 Hex Nyloc (4)
20
21
22
23
24
25
26
27
28
29
30
31
32
3-6453
4-2901
4-2900
4-2659
3-6452
4-2660
3-6459
3-6458
3-6460
3-6461
9-1325
2-7327
7-9226
59
9-1323
60
61
3-6450
3-5779
62
63
64
65
4-2834
3-6457
3-6454
5-4104
PIN, Roller
NUT, 1/2-13 Hex Nyloc(13)
ASSEMBLY, Shaft
ROLLER, Low Density
Polyethylene (3)
66
67
68
69
70
71
72
73
74
75
76
77
2-7344
9-1824
3-6465
3-5668
9-0160
2-9869
2-9870
33
34
35
36
2-9264
3-6456
9-1587
9-1884
WHEEL, Gage (4)
SPACER, Gage Wheel (4)
WASHER, 1/2” Flat (26)
SCREW, 1/2-13 x 1-1/2”
Hex Head Cap, Gr. 2 (4)
TUBE, Caster (Weldment) (2)
BUSHING, Caster (4)
37
38
4-2652
2-3556
2-9871
2-6107
9-0993
9-0393
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
29
Download from Www.Somanuals.com. All Manuals Search And Download.
61” MOWER DECK ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
30
Download from Www.Somanuals.com. All Manuals Search And Download.
61” MOWER DECK ASSEMBLY
ITEM
PART NO.
DESCRIPTION
ITEM
PART NO.
DESCRIPTION
1
4-2651
WELDMENT, 61” Deck-
Adjustable Height
39
7-6998
FITTING, Lube1/4-28
Straight (3)
2
3
4
5
6
7
8
9
4-6729
2-3735
2-9303
9-1299
3-5542
9-1823
3-6447
9-1802
COVER, 61” Deck
KNOB (4)
40
41
42
43
3-6444
4-2655
4-2653
2-9355
ARM, Lower Caster (2)
ARM, Caster Support L.H.
ARM, Caster Support R.H.
BOLT, 1/2-13 x 3-3/4”, Hex
Head, Grade 5 (6)
BOLT, 1/2-13 x 3” Hex
Head (3)
WELDMENT, Caster (2)
SCREW, 3/8-16 x 1-1/4”
Hex Head Cap, Grade 5 (2)
SLEEVE, Axle (2)
SCREW, 1/2-13 x 5-1/2”,
Hex Head Cap, Grade 5 (2)
SPACER, PM (2)
BUSHING, Machine (2)
PIN, 7/16” HD Lynch (2)
GEARBOX, Right Angle
BOLT, 1/2-13 x 5” Hex
Head Cap, Grade 5 (5)
PULLEY, Cast 5.45 O.D.
SHIM, Gearbox
STANDOFF, 3-1/2” (4)
NUT, 3/8-16 Hex Nyloc (14)
V-Belt, 61”(134.5”) HB
KEY, 5/32 x 5/8 Woodruff
MOUNT, Motor (Front)
SCREW, 5/16-18 x 5/8” Set
Yellow Zinc (2)
SET SCREW, 3/8-16 x 3/8” (2)
SCREWJACK, Warner
Electric 1000 lbs.
DEFLECTOR, Chute 61”
(Weldment)
PIN, Chute Hinge
PIN, 3/32 x 1” Cotter
SPRING, Chute
BAFFLE, Front (2)
44
9-1821
45
46
4-2780
9-1328
10
11
9-0132
3-6448
47
48
2-2151
9-1326
12
4-2656
49
50
51
52
53
2-1960
2-3747
1-7711
3-6451
9-1822
13
14
15
16
17
18
2-9277
9-1313
2-7950
3-6445
1-0211
9-1331
KEY. #9 Woodruff
WASHER, 13/32 x 1-1/2”
Flat (7)
54
55
56
3-5788
3-6455
4-2657
19
9-1304
SCREW, 3/8-16 x 1”, Hex
Head Cap, Grade 5 (18)
SPACER, Motor, Rear (2)
LINK, Weldment L.H.
LINK, Weldment R.H.
LINK, Height of Cut (2)
SPACER, Tube (2)
HOLDER, Pivot (2)
MOUNT, Roller L.H.
MOUNT, Roller R.H.
TUBE, Roller
PIN, Roller
NUT, 1/2-13 Hex Nyloc (20)
ASSEMBLY, Shaft
ROLLER, Low Density
Polyethylene (3)
WHEEL, Gage (4)
TUBE, Jack stand
(Weldment) (2)
20
21
22
23
24
25
26
27
28
29
30
31
32
3-6453
4-2662
4-2661
4-2659
3-6452
4-2660
3-6459
3-6458
3-6460
3-6461
9-1325
2-7327
7-9226
57
58
4-2658
9-1544
WELDMENT, Jack stand (2)
NUT, 1/2-13 Hex Flange
Lock, Grade 5 (2)
BOLT, 1/2-13 x 1-1/4” Hex
Flange Lock, Grade 5 (2)
BRACKET, Strain Relief
RELIEF, Strain (see pg. 34)
HARNESS, Deck Lift (see
pg. 34)
BRACKET, Gage Wheel (2)
INDICATOR, Height-of-Cut
ASSEMBLY, Telescoping
Drive shaft
WASHER, 5/8” Flat (2)
PIN, 5-16 Lynch (2)
59
9-1323
60
61
62
3-6450
3-5779
4-2834
63
64
65
3-6457
3-6454
5-4104
66
67
68
69
70
71
72
73
74
75
76
77
2-7344
9-1824
3-6465
3-5668
9-0160
2-9869
2-9870
33
34
35
36
2-9264
3-6456
9-1587
9-1884
SPACER, Gage Wheel (4)
WASHER, 1/2” Flat (26)
SCREW, 1/2-13 x 1-1/2”
Hex Head Cap, Gr. 2 (4)
TUBE, Caster (Weldment) (2)
BUSHING, Caster (4)
BALLJOINT, 1/2-20 (2)
SPACER
SCREW, 3/8-24 x 1”, Gr. 5
ASSEMBLY, Wheel/Tire (2)
TIRE, 9” x 3.50” -4 Ply
VALVE, Air (Snap-In)
RIM
GREASE, Multi-Purpose
SCREW, 1/2-20 x 4-1/2” (4)
NUT, 1/2-20 Hex Nyloc (4)
37
38
4-2652
2-3556
2-9871
2-6107
9-0993
9-0393
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
31
Download from Www.Somanuals.com. All Manuals Search And Download.
73” MOWER DECK SUB-ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
32
Download from Www.Somanuals.com. All Manuals Search And Download.
73” MOWER DECK SUB-ASSEMBLY
ITEM
1
PART NO.
4-1839
4-6250
4-6251
4-1295
3-6449
3-5789
3-6459
3-6458
4-3824
4-6623
4-6509
4-6371
2-2522
4-1821
3-6457
4-6515
3-5789
2-9303
2-3735
4-4752
9-1553
9-1305
9-1331
1-3847
9-1619
9-1300
9-1304
9-1640
9-1299
DESCRIPTION
WELDMENT, 73” Deck
2
CHANNEL, L.H. Deck Stiffener
CHANNEL, R.H. Deck Stiffener
WELDMENT, Idler Pivot
3
4
5
STAND, Fixed Idler
6
PULLEY, Idler 5-1/2” O.D.
7
ROLLER MOUNT, Left Hand
ROLLER MOUNT, Right Hand
HANGER BRACKET, Rear Deck Lift (2)
BRACKET, Rear Deck Hanger (2)
STIFFENER, Deck (2)
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
DECAL, 73” Deck
DECAL, Warning
WELDMENT, Gage Wheel (2)
BRACKET, Gage Wheel (2)
WELDMENT, Caster Support (2)
PULLEY, Idler 5-1/2” O.D.
STANDOFF, 3-1/2” (6)
KNOB, 5/16-18 (6)
SPACER (2)
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5 (2)
SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5 (2)
WASHER, .406 I. D. x 1-1/2” O.D. Flat
RETAINER, 3/8” Bolt
NUT, 3/8-16 Hex Flange Lock
WASHER, .44 I.D. x 1” O.D. (7)
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (16)
BOLT, 3/8-16 x 1” square Neck Carriage, Grade 5 (30)
NUT, 3/8-16 Hex Nyloc (44)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
33
Download from Www.Somanuals.com. All Manuals Search And Download.
73” MOWER DECK ASSEMBLY
60
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
34
Download from Www.Somanuals.com. All Manuals Search And Download.
73” MOWER DECK ASSEMBLY
ITEM
1
2
3
4
5
6
7
8
PART NO.
9-1822
2-9264
3-6456
9-1325
9-1541
4-4839
2-1960
4-4892
2-3747
4-4646
9-1617
7-9868
7-9882
9-1299
3-6461
3-6460
9-1884
2-7327
7-9226
2-7344
1-7711
1-9152
2-3556
4-6523
7-6998
9-1326
2-2151
2-9869
2-9870
2-9871
2-2394
2-2395
1-2234
4-6430
5-7779
4-7139
2-9277
9-1313
2-7950
4-6624
9-1304
1-3857
4-6889
5-7863
9-0132
9-1802
4-2619
3-2031
1-2709
9-1305
9-1300
3-5789
9-1553
9-1331
3-5667
3-5858
4-6891
4-6644
9-1922
2-3735
DESCRIPTION
SCREW, 1/2-13 x 5” Hex Head Cap (2)
GAGE WHEEL (2)
SPACER, Gage Wheel (2)
NUT, 1/2-13 Hex Nyloc (5)
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap (2)
CAP, Caster Shaft (2)
SPACER (6)
BEARING, Flanged Radial 1 x 2 x 23/32” Double Seal (4)
BUSHING, Machine 1” I.D. (4)
WELDMENT, Gauge Wheel Caster (2)
SCREW, 3/8-16 x 6” Hex Head Cap (2)
ROLLER, 3-3/4 x 4-13/16” Nylon (2)
TUBE, Axle (2)
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
NUT, 3/8-16 Hex Nyloc (6)
ROD, Threaded Roller
TUBE, Roller
SCREW, 1/2-13 x 1-1/2” Hex Head Cap
WELDMENT, Pivot Pin
ROLLER, Low Density Polyethylene (3)
WASHER, 5/8” SAE Flat (2)
PIN, 7/16” Linch (2)
SPACER, Caster (12)
BUSHING, Caster (6)
WELDMENT, Caster Yoke (2)
FITTING, 1/4-28, Straight, Grease (3)
SCREW, 1/2-13 x 5-1/2” Hex Head Cap, Grade 5 (2)
SLEEVE, Axle (2)
ASSEMBLY, Wheel/Tire (2) (includes items 29-34)
TIRE, 9 x 3.50-4, 4 Ply Smooth
RIM, One Piece Steel, White
BEARING, Flanged (2)
BEARING, Roller (not shown)
VALVE, Air
FITTING, 1/4-28, 45 Degree, Grease
GROUP, Spindle (3) (see page 24 for parts breakdown)
WELDMENT, Chute Deflector
HINGE PIN, Chute
PIN, 3/32 x 1” Cotter
SPRING, Chute
GEARBOX, Right Angle 1.5:1
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (4)
KEY, 1/4 x 7/8” Woodruff (2)
PULLEY, Cast 5.95 O.D.
DRIVESHAFT, Telescoping
SCREW, 3/8-16 x 3/8” Set (2)
SCREW, 5/16-18 x 5/8” Socket Head Set (2)
WELDMENT, Idler Arm
WASHER, 1-1/32 I.D. x 1-1/4” O.D. Flat
E-RING, 1”
SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5
WASHER, 3/8” Flat
PULLEY, 5-1/2” O.D. Idler
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5
WASHER, 13/32 I.D. x 1-1/2” O.D. Flat
SPRING, Extension
SPACER, 1/2 I.D. x 3/4” O.D. x .83
BELT, 152” HB Section
GUARD, Pulley (2)
NUT, 1/2-13 Hex Light Nyloc (2)
KNOB (6)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
35
Download from Www.Somanuals.com. All Manuals Search And Download.
52” & 61” DECK IDLER ASSEMBLIES
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
36
Download from Www.Somanuals.com. All Manuals Search And Download.
52” & 61” DECK IDLER ASSEMBLIES
ITEM PART NO.
DESCRIPTION
1
9-1305
9-1300
3-5789
9-1299
2-3556
4-2619
7-6998
9-1553
3-5858
3-5667
9-1304
4-1295
1-2709
9-1331
3-6449
3-2031
SCREW, 3/8-16 x 2” Hex Head Cap, Grade 5 (2)
WASHER, 3/8” Flat (2)
2
3
PULLEY, Idler 5-1/2” O.D. (2)
NUT, 3/8-16 Hex Nyloc (11)
BUSHING (2)
4
5
6
ARM, Idler (Weldment)
7
FITTING, Lube 1/4-28 Straight
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, Grade 5 (2)
SPACER, .50 I.D. x .75 O.D. x .83
SPRING, Extension
8
9
10
11
12
13
14
15
16
SCREW, 3/8-16 x 1” Hex Head Cap, Grade 5 (6)
PLATE, Tri-Mount (Weldment)
E-RING 1”
WASHER, .406 x 1.5 x .120 Yellow Zinc (2)
STAND, Fixed Idler
WASHER, 1.031 x 1.25
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
37
Download from Www.Somanuals.com. All Manuals Search And Download.
73” DECK FRAME ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
38
Download from Www.Somanuals.com. All Manuals Search And Download.
73” DECK FRAME ASSEMBLY
ITEM
1
PART NO.
4-7171
9-1523
9-0219
9-1587
4-3803
4-6595
4-7130
4-6602
1-2802
9-1516
4-6508
4-6507
4-3824
4-6598
4-6599
4-6596
4-6597
3-5496
4-6856
4-6857
4-6603
9-1298
9-1299
9-0863
4-6594
4-7178
9-0735
4-6605
9-1922
2-9258
3-6448
3-6454
4-6593
9-1218
9-1501
9-1514
4-7166
DESCRIPTION
PLATE, Diamond Tread Foot
2
SCREW, 5/16-18 x 5/8” Hex Washer Head, Self-Tapping Swage (8)
SCREW, 5/16 x 2-1/2” Hex Head Cap, Grade 2 (4)
WASHER, 17/32 Flat (22)
3
4
5
BRACKET, Deck Lift Hanger (2)
ARM, Front Lift (Weldment)
6
7
FRAME, Deck (Weldment)
8
BAR, 7” Lift
9
PIN, 1/2 x 1 1/8” Clevis (YZ) (2)
PIN, 5/32 x 1” Cotter (16)
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
ANGLE, Front Deck Mounting (L.H.)
ANGLE, Front Deck Mounting (R.H.)
BRACKET, Deck Lift, Rear (2)
ROD, Timing, 1/2” Threaded (2)
SWIVEL, .50 Thru Hole (4)
ARM, Rear Bellcrank (L.H.) (Weldment)
ARM, Rear Bellcrank (R.H.) (Weldment)
BEARING, .75 I.D. (4)
J-BOLT, 1/2” Dia. x 8 1/2” Long (Front)
J-BOLT, 1/2” x 7” Long (Rear)
BAR, 5.62 Lift
NUT, 5/16-18-3B (YZ) (4)
NUT, 3/8-16 Nyloc (YZ) (2)
WASHER, 13/16 x 1 15/32” (HS) (2)
CHANNEL, Deck Stabilizer (2)
J-BOLT, Deck Attachment (2)
BOLT, 1/2-13 x 4” Hex (HO) (3)
SLEEVE, Stabilizer (2)
NUT, 1/2-13 Nyloc, Regular (YZ) (2)
BUSHING, Suspension (4)
LINEAR ACTUATOR, 1000 Lbs., 4” Stroke
INDICATOR, Height Of Cut
BRACKET, Actuator Anchor
SCREW, 1/2 UNC x 2.5 Hex Head Cap (Black Phosphate)
SCREW, 3/8-16 x 2-1/2” Hex Head Cap (2)
WASHER, .406 x .812 x .075” (YZ) (2)
WIRE HARNESS, Deck Lift
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
39
Download from Www.Somanuals.com. All Manuals Search And Download.
73” DECK FRONT CASTER ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
40
Download from Www.Somanuals.com. All Manuals Search And Download.
73” DECK FRONT CASTER ASSEMBLY
ITEM
PART NO.
--
DESCRIPTION
1
2
3
4
5
6
7
8
9
ASSEMBLY, 11” Front Caster (Includes Items 2 thru 14) (2)
RING, 1” External Retaining
FITTING, 3/16” Lube
1-2709
1-3864
2-3556
2-3747
2-9141
3-5359
4-6620
4-7138
BUSHING, Caster
BUSHING, 1” Machine
BEARING, Flanged Ball
TUBE, 5/8” x 18 Ga. Wall x 3.545
YOKE, Caster (Weldment)
ARM, Telescoping Caster (Weldment)
10
11
12
13
14
5-8248
1-2234
7-2197
3-5358
3-5618
ASSEMBLY, Wheel (Includes Items 11 thru 14)
VALVE, Air
HUB, Caster Wheel White
BEARING, 5/8” I.D. x 1-3/8” (2)
TIRE, 11 x 4.00-5 Smooth Tread
15
16
17
18
9-1917
9-1772
9-1821
9-1922
NUT, 7/16-14 Hex Nyloc
SCREW, 7/16-14 x 6” Hex Head Cap, Grade 5
SCREW, 1/2-13 x 3” Hex Head Cap (2)
NUT, 1/2-13 Hex Light Nyloc (2)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL COMPONENTS
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
42
Download from Www.Somanuals.com. All Manuals Search And Download.
ELECTRICAL COMPONENTS
ITEM
PART NO.
DESCRIPTION
1
2
3
4
5
6
7
8
3-5607
3-5609
3-5610
1-8829
2-6343
1-7590
2-3355
7-9208
1-5277
2-2366
2-2696
9-0072
9-0372
9-0055
1-5861
2-3506
3-5779
1-2080
3-5606
3-5614
1-9547
3-5658
3-5661
3-5550
3-5659
9-1240
9-0376
3-5700
3-5702
4-2834
9-0585
1-6132
9-1546
1-2685
1-1138
CABLE, Battery- Positive
CABLE, Battery- Negative
BATTERY, 11 Plate- 375CCA
HEAD LIGHT (2)
SWITCH, Ignition- Afterfire Solenoid
SWITCH, Seat NC (see page 19 for illustration)
SWITCH, DPDT
BUZZER, Pulsing
HOUR METER, D.C. Series 1500
BRACKET, Battery
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
SPRING, Battery
SCREW, 1/4-20 x 5/8”, Hex Head Cap, Gr. 5 (2)
NUT, 1/4-20 Hex Center Lock, Grade B or 5 (2)
WASHER, .28 I.D. x .63 O.D. x .06 Flat (2)
CLIP, Harness
BEZEL
STRAIN RELIEF, Wire (2)
CABLE TIE, 7” (15)
HARNESS, Control Panel
HARNESS, Front
ASSEMBLY, Ammeter and Clamp
SWITCH, PTO
SPACER, PTO Switch
BEZEL, Headlight (2)
SWITCH, Lights
SCREW, #10-32 x 5/8” Hex Wash. Hd. Machine, Gr. 5 (2)
NUT, #10-32 Hex Nyloc (2)
SWITCH, Self Centering, Deck Lift
SEAL, Switch
HARNESS, Deck Lift
NUT, 5/16-18 Hex Flange Lock, Grade 5
SPACER, 5/8”
WASHER, 5/8” Internal Tooth Lock
NUT, 5/8-32 Hex
KEY, and Ring
PLUG
CONNECTS TO:
PLUG
CONNECTS TO:
A.
B.
C.
D.
E.
F.
Electric Clutch
Starter Solenoid
Engine
Battery
Deck Lift Switch
Fuse Box (mounted under Console
Panel, item 3-5701, Page 20)
PTO Switch
Light Switch
Amp Meter
M.
N.
O.
P.
Q.
R.
S.
T.
U.
V.
Ignition Switch
Electric Screwjack (3-6448, page 30)
Front Harness
Battery Terminal (Neg.)
Control Panel Harness (Green Wire)
Ground (Engine Base)
Control Panel Harness
Right Head Light
G.
H.
I.
Park Break Switch (2-3355)
Seat Switch (1-7590)
J.
K.
L.
Hour Meter
Buzzer
Front Harness
W.
X.
Y.
Deck Lift Harness (3-5615)
Left Head Light
Starter Solenoid
Z.
AA.
Control Panel Harness (Black Wire)
Battery Terminal (Pos.)
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT ASSEMBLY
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
44
Download from Www.Somanuals.com. All Manuals Search And Download.
SEAT ASSEMBLY
ITEM
PART NO.
DESCRIPTION
1
**
PAN, Complete
2
3-6476
3-6477
4-4724
3-5568
3-6478
3-6479
3-6484
3-6485
**
CUSHION, Seat
3
CUSHION, Back
4
BRACKET, Armrest R.H.
BRACKET, Armrest L.H.
CHANNEL, Armrest (2)
ARM PAD, Grey (2)
ADJUSTER (with lock)
ADJUSTER (without lock)
STUD GUARD (4)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
3-6486
9-1296
9-1601
**
SPACER, Bell (4)
WASHER, 11/32” Flat, Grade 5 (8)
NUT, 5/16-18 Hex Flange Grade 5 (6)
SCREW, 1/4-20 x 3/4” Phillips (9)
SCREW, #8 x 1/2” Set (2)
**
2-7174
3-5797
9-1067
9-0646
9-0975
9-0683
4-2968
4-4902
4-4903
9-1919
4-4904
9-1303
SCREW, 5/16-18 x 2” Hex Head Cap, Grade 5 (2)
WASHER, .406 I.D. Poly (4)
NUT, 5/16-18 Hex Center Lock Grade B (2)
SCREW, 1/2-13 x 1” Hex Head Cap, Grade 5 (2)
NUT, 1/2-13 Hex Head Center Lock, Grade 5 (2)
SCREW, 5/16-18 x 1” Slotted Pan Head
HOLDER, Beverage
SPACER, Cup Holder
COVER, Cup Holder
RIVET, 3/16 Pan Head (3)
BRACKET, Arm Rest Cup Holder
BOLT, 5/16-18 x 1’ Short Neck Carriage Gr. 5 (6)
**NOTE: Not a Sales Item.
Refer to Page 18 for Seat Support Components.
OUT FRONT ZTR SERIES 0
MANUAL No. 06106
45
Download from Www.Somanuals.com. All Manuals Search And Download.
WIRING SCHEMATIC
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
46
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
MANUAL No. 06106
OUT FRONT ZTR SERIES 0
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Manual for
TM
OUT FRONT Z-RIDER
ZERO TURNING HYDRO DRIVE
SERIES 0
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE
AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD
IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH
CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
COPYRIGHT © 2002
SNAPPER INC.
ALL RIGHTS RESERVED
MANUAL No. 06106
(REV 4, 9/30/02)
PRINTED IN U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|