Parts Manual for
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
MODEL
YZ18425BVE
YZ18426BVE
YZ20485BVE
YZ20486BVE
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2005
SNAPPER PRODUCTS, INC.
Manual No. 7006176
ALL RIGHTS RESERVED.
Revision 3, 7/26/2005
TP 400-5008-3-HZ-N
Table Of Contents
PAGE
4
GROUP
CASTER, FRONT WHEEL & TIRE ASSEMBLY
WHEELS- REAR
6
42" FRONT FRAME & COVER ASSEMBLY
48" FRONT FRAME & COVER ASSEMBLY
REAR FRAME ASSEMBLY
8
10
12
16
18
20
24
26
30
32
34
36
38
40
42
44
46
48
50
52
54
56
58
60
JOYSTICK & OPERATOR SEAT (Part 1)
JOYSTICK & OPERATOR SEAT (Part 2)
FENDER & TRANSAXLE ASSEMBLY
BRAKE/CLUTCH LEVER ASSEMBLY
ENGINE COMPONENTS
CLUTCH ASSEMBLY
42" DECK LIFT HANDLE ASSEMBLY
48" DECK LIFT HANDLE ASSEMBLY
42" MOWER DECK ASSEMBLY (Part 1)
42" MOWER DECK ASSEMBLY (Part 2)
42" MOWER DECK ASSEMBLY (Part 3)
48" MOWER DECK ASSEMBLY (Part 1)
48" MOWER DECK ASSEMBLY (Part 2)
42" SPINDLE ASSEMBLY
48" SPINDLE ASSEMBLY
DECALS (Part 1)
DECALS (Part 2)
ELECTRICAL COMPONENTS (Part 1)
ELECTRICAL COMPONENTS (Part 2)
WIRING SCHEMATIC (18 hp engine)
WIRING SCHEMATIC (20 hp engine)
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
3
CASTER, FRONT WHEEL & TIRE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
4
CASTER, FRONT WHEEL & TIRE ASSEMBLY
Item Part No
Qty Description
Note
1
7059090
2
ASSEMBLY, Front Wheel & Tire (Complete) (Includes Items 2
thru 5)
2
3
4
7035618
7039477
7076998
1
1
1
TIRE, 11 x 4.00-5, Smooth Tread
RIM, 5.00 Dia. x 3.00
per front wheel & tire assembly
per front wheel & tire assembly
LUBE FITTING, 1/4-28 Thread Forming
Was 29275, per front wheel &
tire assembly
5
6
7012234
7012709
7023556
7013864
7041783
7090839
7035359
7035358
7091772
1
2
4
2
2
2
2
4
2
VALVE STEM, Air (Snap-in)
per front wheel & tire assembly
RING, 1” External Retaining
7
BUSHING, Caster
Was 46626
8
LUBE FITTING, Straight (press-fit for .187 dia. Hole)
WELDMENT, Pivot Yoke, Caster
NUT, 7/16-14 Hex Center Lock, GR5 or B
TUBE, 5/8 O.D. x 14 Ga x 4.51
BEARING, Ball, 5/8 x 1-3/8”
9
10
11
12
13
SCREW, 7/16-14 x 6” Hex Head Cap, GR5
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
5
WHEELS- REAR
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
6
WHEELS- REAR
Item Part No
Qty Description
Note
1
7058959
2
ASSEMBLY, Rear Tire & Rim, 18 x 9.50-8, Multi-Trac ( Incl. 2A, used on 48” Deck Models
3A & 7)
7058948
2
1
ASSEMBLY, Rear Tire & Rim (Includes items 2B, 3B & 7)
TIRE, 18 x 9.50-8, Multi-Trac
used on 42” Deck Models
2A 7072706
Was 46339, per rear wheel &
tire assembly
2B 7046322
3A 7039468
3B 7039468
1
1
1
2
2
2
1
2
TIRE, 18 x 8.50-8, Multi-Trac
RIM, 18 x 8.50 Wheel w/25mm Hub I. D.
RIM, 18 x 8.50 w/25mm Hub
WASHER, 1.56 x 1.054 x .047 Flat
KLIPRING, 1” External (Waldes Truarc 5304-100)
HUB CAP
per rear wheel & tire assembly
per rear wheel & tire assembly
per rear wheel & tire assembly
4
5
6
7
8
7072028
7091764
7011022
7012234
7042940
VALVE STEM, Air (Snap-in)
KEY, Square M6 x 38mm
per rear wheel & tire assembly
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
7
42" FRONT FRAME & COVER ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
8
42" FRONT FRAME & COVER ASSEMBLY
Item Part No
Qty Description
WELDMENT, Front Frame Series 3
Note
1
2
7059380
7075910
7090595
7091601
7028260
7090324
7090517
7035375
7035374
7075841
7075219
7091890
7023341
7075885
7041818
7075993
7046426
7071916
1
1
6
5
2
2
2
2
1
1
1
4
2
1
3
1
1
1
PLATE, Footrest Support
3
BOLT, 5/16-18 x 3/4” Hex Flange Lock
NUT, 5/16-18 Hex Flange Lock, GR5
FASTENER, “U” Type
4
Was 91070
5
6
SCREW, 3/8-16 x 1” Hex Washer Self-tap
WASHER, 3/8” FLAT (wide)
SPACER, Front Frame Pivot
PLATE, Front Frame Slip
7
8
9
10
11
12
13
14
15
16
17
18
FLOOR PAN, HOZ
FOOTREST, HOZ
WASHER, 1/4” Internal/External Lock
KNOB (1/4-20 thread)
MAT, Floor
PAD, Floor Board Support
DECAL, Warning, Read Manuals & Instructions
DECAL, Deck Height
see decal page
see decal page
DECAL, SNAPPER (14.56” long)
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
9
48" FRONT FRAME & COVER ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
10
48" FRONT FRAME & COVER ASSEMBLY
Item Part No
Qty Description
WELDMENT, Front Frame Series 3
Note
1
7059380
7075910
7090595
7091601
7028260
7090324
7090517
7035375
7035374
7075841
7075219
7091890
7023341
7075885
7041818
7075993
7046426
7071916
7047099
7091573
7091584
7059240
7022717
7017847
7047060
7074256
7091598
7090667
7046599
7091894
7091947
7090250
1
1
6
5
2
2
2
2
1
1
1
4
2
1
3
1
1
1
2
4
6
1
1
1
1
1
1
1
1
1
1
2
2
PLATE, Footrest Support
3
BOLT, 5/16-18 x 3/4” Hex Flange Lock
NUT, 5/16-18 Hex Flange Lock, GR5
FASTENER, “U” Type
4
Was 91070
5
6
SCREW, 3/8-16 x 1” Hex Washer Self-tap
WASHER, 3/8” FLAT (wide)
SPACER, Front Frame Pivot
PLATE, Front Frame Slip
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
FLOOR PAN, HOZ
FOOTREST, HOZ
WASHER, 1/4” Internal/External Lock
KNOB (1/4-20 thread)
MAT, Floor
PAD, Floor Board Support
DECAL, Warning, Read Manuals & Instructions
DECAL, Deck Height
see decal page
see decal page
DECAL, SNAPPER (14.56” long)
BRACKET, Saddle
BOLT, 1/4-20 x 5/8” Short Square Neck Carriage
NUT, 1/4-20 Hex Flange Lock
WELDMENT, Front Lift, 48
ROD, Deck Support
Was 90551
Was 90583
RING, .438 External Retaining
WELDMENT, Rear Lift
TIMING ROD, 48 (1/2-13 thread)
PIN, 1/8 x 1” Cotter
Was 90041
WASHER, 1/2 SAE Flat
SWIVEL, .50 Thru Hole
NUT, 1/2-13 Hex Center Lock, GR5 or B
HAIR PIN, 1/8 x 1/2”
WASHER, 1/2” SAE Flat
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
11
REAR FRAME ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
12
REAR FRAME ASSEMBLY
Item Part No
Qty Description
Note
1
2
7041782
7035368
7035369
7090999
7090731
7075630
7091601
7033587
7091506
7091587
7090975
1
2
2
2
2
1
2
1
4
1
1
1
1
2
4
4
4
4
2
1
1
1
1
3
2
1
1
1
1
1
1
2
1
2
1
WELDMENT, Rear Frame
CUSHION, Seat Support
3
SPRING, Seat Support
4
SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
BOLT, 5/16-18 x 1/2” Short Neck Carriage, GR5
HINGE, Seat
5
Was 90004
Was 91070
6
7
NUT, 5/16-18 Hex Flange Lock, GR5
BUMPER, Rear
8
9
SCREW, 5/16-18 x 1-1/2” Hex Washer Self-Tap
WASHER, .531 x 1.062 x .121 SAE Flat
NUT, 1/2-13 Hex Center Lock, GR5 or B
WELDMENT, Battery Bracket
WELDMENT, Battery Bracket
BUSHING, Tie Rod
10
11
12A 7041793
12B 7058238
used on 48” Deck Model only
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
7013321
7090238
7011791
7091315
7091297
7011033
7029464
7091730
7058728
7058692
7090122
7091585
7024344
7079832
7034937
7045168
7091553
7039485
7091240
7018574
7090376
7022886
SCREW, 5/16-24 x 1” Hex Head Cap, GR5
RETAINER, 5/16” Bolt
WASHER, .32 x .58 x .08 Split Lock
NUT, 5/16-24 Hex, GR5 or B
GROMMET
ASSEMBLY, Brake/Clutch Cable
BOLT, 1/2-13 Hex Shoulder
WELDMENT, Idler Arm, Primary
SPRING, Extension- 5” long
WASHER, 3/8” SAE Flat
NUT, 3/8-16 Hex Center Lock, GR5 or B
PULLEY, Idler, V 3.30 HA
BOLT, 3/8-16 x 4” Hex Head Cap, GR5
BRACKET, Hydro Idler
SPRING, Extension, Hydro Idler
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR5
CABLE, Hydro Release Valve
SCREW, #10-32 x 5/8” Hex Washer Head Machine
IDLER, 4.12” Outside Diameter, Flat
NUT, #10-32 Hex Nyloc
SWITCH, Seat (NO/NC) Snap-In
also shown on electronic
components page
35
36
7075102
7034938
1
1
SLEEVE, Idler
GUIDE, Belt
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
13
REAR FRAME ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
14
REAR FRAME ASSEMBLY
Item Part No
Qty Description
Note
37
38
39
7058691
7091272
7043858
1
4
2
COVER-Spring
FASTENER, Ratchet
BUSHING, Flange, .64 x .75 x .5
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
15
JOYSTICK & OPERATOR SEAT (Part 1)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
16
JOYSTICK & OPERATOR SEAT (Part 1)
Item Part No
Qty Description
BRACKET, R.H. Tank Support
Note
1
7035483
7042637
7035533
7042636
7091800
7023656
7090844
7058531
7075612
7035936
7046246
7046494
7090999
7075811
7075760
7034817
7091593
7090188
7044717
7044763
7091020
7044702
7091511
7091315
7014664
7075617
7091908
7091298
7075610
7091542
7026343
1
1
1
1
4
1
1
1
1
1
1
1
9
1
1
1
1
3
1
1
2
1
1
1
1
1
2
2
1
4
1
2
WELDMENT, Bracket, Joystick
PIVOT, Joystick Control
3
4
WELDMENT, Handle, Joystick Control
BOLT, 5/16-18 Shoulder, w/Nylon Patch
LEVER, Shift Handle (grip)
ROLL PIN, 3/16 x 3/4”
5
6
7
8
ASSEMBLY, R.H. Fender
9
BRACKET, R.H. Console
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
BOOT, Joystick, Rubber
BRACKET, Joystick Boot
STOP, Joystick
SCREW, 1/4-20 x 5/8” Pan Head Self-Tap (Torx)
DECAL, Ignition Switch
see decal page
DECAL, SNAPPER
DECAL, SCRAMBLER
PIN, 3/8 Self Locking Cotter
WASHER, .34 x .69 x .08 Flat
CYLINDER, Joystick Control
WELDMENT, U-Bracket
PUSHNUT, 1/4”
PIN, Joystick
NUT, 5/16-18 Hex, GR5 or B
WASHER, .32 x .58 x .08 Split Lock
BOLT, 5/16-18 x .530” Shoulder
ARM REST, HOZ
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR5
NUT, 5/16-18 Hex Nyloc
FENDER, R.H. Lower
SCREW, 5/16-18 x 1/2” Pan Head Self-Tap (Torx)
SWITCH, Ignition (After-fire Solenoid)
also shown on electronic
components page
32
33
34
7091819
7058513
7090361
7
1
4
SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap
WELDMENT, Fender Support
Was 90362
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
17
JOYSTICK & OPERATOR SEAT (Part 2)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
18
JOYSTICK & OPERATOR SEAT (Part 2)
Item Part No
Qty Description
Note
1
2
3
4
7035481
7075629
7075609
7023355
1
1
1
1
BRACKET, L.H. Tank Support
BRACKET, Brake/Clutch Detent
FENDER, L.H. Lower
SWITCH, Park Brake (NC/NO)
also shown on electronic
components page
5
7090913
2
1
1
1
1
SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
BRACKET, L.H. Console
(Torx)
6A 7075611
6B 7038601
6C 7078034
series 5
BRACKET, L.H. Console
YZ18426BVE
YZ20486BVE
BRACKET, L.H. Console
7
7075884
SWITCH, PTO E.C. (Delta Part No. 6201-219)
also shown on electronic
components page
8A 7072517
8B 7028564
1
1
1
1
CONTROL, Throttle/Choke, Dual Lever
CONTROL, Throttle
series 5
series 6 (not shown)
9
7058511
7058530
WELDMENT, Fuel Tank Support
ASSEMBLY, Fuel Tank/Left Hand Fender
10
includes fuel cap (75748),
grommet (12337), fitting (74835)
& tube (75708)
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
32
34
7075748
7074835
7090999
7012337
7075760
7075708
7071683
7090188
7075812
7075810
7044897
7046561
7075628
7090858
7023655
7075617
7091908
7091298
7071921
7091542
7091819
7090361
1
1
6
1
1
1
1
2
1
1
1
1
1
4
1
1
2
2
1
4
3
2
GAS CAP w/Screw Vent
FITTING, Dapco
Dapco part number #11492
(Torx)
SCREW, 1/4-20 x 5/8” Pan Head Self-Tap
GROMMET
DECAL, SNAPPER
DIP TUBE
DECAL, Hydro Release
see decal page
WASHER, .34 x .69 x .08 Flat
DECAL, Park Brake
see decal page
see decal page
DECAL, Operating Instructions
SEAT, Milsco High Back
TETHER, Seat
HEAT SHIELD, Engine
SCREW, 5/16-18 x 1/2” Hex Washer Self-Tap
LEVER, Throttle Control
series 6
ARM REST, HOZ
SCREW, 5/16-18 x 1-3/4” Hex Head Cap, GR 5
NUT, 5/16-18 Hex Nyloc
RIVET, Plastic Snap
series 6
(Torx)
SCREW, 5/16-18 x 1/2” Pan Head Self-Tap
SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
Was 90362
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
19
FENDER & TRANSAXLE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
20
FENDER & TRANSAXLE ASSEMBLY
Item Part No
Qty Description
TRANSAXLE, Hydro
Note
1
7029128
7029129
7015894
7091122
7035337
7035336
7091771
7041823
7034915
7034916
7091819
7034909
7034908
7034917
7035424
7091541
7090324
7034922
7029147
7091801
7029170
7029169
7039484
7090361
7039483
7012114
7091841
7034913
7091165
7090746
7034914
7090122
7029284
7029142
7091594
7024586
1
1
2
8
2
2
2
1
2
1
4
1
1
1
1
26
8
2
4
4
1
1
1
2
2
2
2
2
4
4
2
6
1
1
2
2
Eaton Model X778-005
Eaton Model X778-011
2
TRANSAXLE, Hydro w/o Manifold R.H.
KEY, #605 Woodruff
3
4
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
FAN, 6” O.D., 10 Blade
Was 90539
5
6
PULLEY, Hydro Input
7
RING, RR3100-66 External Retaining
V-BELT, HA Sect. 42.00” effective length
BRACKET, Support, Fender
8
Hydro Drive
Was 90362
9
10
11
12
13
14
15
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
BRACKET, Support, Hydro
SCREW, 1/4-20 x 5/8” Hex Washer Self-Tap
FENDER, Rear Frame, Left Hand
FENDER, Rear Frame, Right Hand
BRACKET, Deck Support, Left Rear
BRACKET, Deck Support, Right Rear
SCREW, 5/16-18 x 3/4” Hex Washer Self-Tap
SCREW, 3/8-16 x 1” Hex Washer Self-tap
BRACKET, Control Cable, Hydro
ROD END, #10-32 w/Stud
Was 90368
NUT, #10-32 Hex Center Lock
CABLE, L.H. Hydraulic Control (45.5” long)
CABLE, R.H. Hydraulic Control (35.0” long)
BRACKET, Cable, Hydro Release Valve
SCREW, 5/16-18 x 5/8” Hex Washer Self-Tap
BRACKET, Actuator, Hydro Release Valve
BUSHING, Differential Link, Powdered Metal
SCREW, 5/16-18 x 1” Hex Washer Self-Tap, GR 5
ARM, Directional Control
BOLT, 1/4-28 x 5/8” w/Nyloc Patch, GR 8
WASHER, 1/4” Belleville
ARM, Brake
WASHER, 3/8" Flat
Was 91514
Was 24874
ROD, Brake, R.H.
ROD, Brake, L.H.
COTTER-PIN, 1/16" x 1.42" Self-Locking
SWIVEL, Brake Link- PM
Footnotes:
NOTE: Use Mobil 1 DTE 26 oil for hydro transaxle.
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
21
FENDER & TRANSAXLE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
22
FENDER & TRANSAXLE ASSEMBLY
Item Part No
Qty Description
Note
38
39
40
41
42
43
7074511
7091299
7039485
7044767
7090011
7090013
2
2
1
1
2
3
SPRING, Brake Compression
NUT, 3/8-16 Hex Nyloc
CABLE, Hydro Release Valve
DECAL, Hydro Reservoir
WASHER, #10, Internal Tooth Lock
NUT, #10-32, Hex
see decal page
Footnotes:
NOTE: Use Mobil 1 DTE 26 oil for hydro transaxle.
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
23
BRAKE/CLUTCH LEVER ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
24
BRAKE/CLUTCH LEVER ASSEMBLY
Item Part No
Qty Description
Note
1
2
3
7023801
7035945
7075527
1
1
1
GRIP, 5/16 x 2-1/2” Vinyl
Was 29383
GRIP, Brake/Clutch Handle
ROD, Park Brake
36” arc radius (replaces 35479
& 58542)
4
5
6
7
8
7035946
7035485
7035484
7091084
7075528
1
1
1
1
1
SPRING, Clutch/Brake Release
ARM, Brake/Clutch Lever
PIVOT, Brake/Clutch Lever
SCREW, 1/4-20 x 3/8” Hex Washer Self-Tap
TUBE, Clutch/Brake Lever
Was 91293
35.99” arc radius (replaces
58541)
9
7010694
7029207
7052431
1
1
2
BUSHING, Nylon
10
11
ROD, Clutch/Brake
ASSEMBLY, Foot Shaft Pivot
weldment with grease fitting,
13864
12
13
14
7090841
7029208
7042614
3
1
1
PIN, 3/16 x 1-1/2” Roll
ARM, Brake/Clutch
WELDMENT, Brake/Clutch Arm
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
25
ENGINE COMPONENTS
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
26
ENGINE COMPONENTS
Item Part No
Qty Description
Note
1
--
2
--
1
ENGINE, 18 HP Briggs Intek
Mod 31H777, Type 0115, Trim
E1 (series 5)
--
1
ENGINE, 18 HP Briggs Intek
Mod 31H777, Type 0117, Trim
E1 (series 6)
7010210
1
2
1
1
1
1
1
1
KEY, 1/4” Square x 2”
GASKET, Exhaust (18 HP)
GASKET, Exhaust (20 HP)
GASKET, 20 HP Intec
ASSEMBLY, Oil Valve
GUIDE, Engine Belt
PLATE, Engine
3A 7015352
3B 7014509
3C 7063283
1.25” I.D. Hole; mat'l graphite
1.18” I.D. Hole; mat'l graphite
1.00” I.D. Hole
4
5
6
7
7027972
7035362
7036389
7041822
PULLEY, Engine
series 5 (bottom pulley 4.25
O.D.)
--
7040706
1
PULLEY, Engine
series 6 (bottom pulley 4.75
O.D.)
8
7090324
7091301
7091763
7091807
7029900
7024161
7024566
7041537
7071756
7074826
7091581
7044824
7041340
7029982
7016325
7012638
4
1
1
1
4
2
1
1
1
1
3
1
1
1
1
1
1
1
3
1
1
1
2
1
1
SCREW, 3/8-16 x 1” Hex Washer Self-tap
WASHER, 7/16 Split Lock
engine mounting bolts
9
10
11
12
13
14
15
16
17
18
19
--
SCREW, 7/16-20 x 1-1/2” Hex Head Cap, GR 5
WASHER, .468 x 1.38 x .25 Flat (special)
HOSE CLAMP, .490 x .31
or 12222
BOLT, 5/16-18 x 4” Shoulder
SCREW LOCK
DEFLECTOR, Muffler
ADAPTER, Muffler
Briggs part no. 695766
Nelson part no. 25482D
MUFFLER, 14.5HP B&S Engine
SCREW, #8-18 x 1/2” Hex Head Sheet Metal
HEAT SHIELD, Muffler- 17HP B&S Intek
HEAT SHIELD, Muffler- B&S
HOSE, Fuel, 1/4 I.D. x 14” long
VALVE, Fuel
series 5
series 6
20
21
22
HOSE, Fuel, 12-1/2” long
Was 12912
series 5
23A 7072517
23B 7028564
CONTROL, Throttle/Choke, Dual Lever
CONTROL, Throttle
series 6
24
25
26
27
28
29
30
7091122
7090606
7015861
7071760
7076272
7071756
7024241
SCREW, 1/4-20 x 1/2” Hex Washer Self-Tap
BOLT, 5/16-18 x 5/8” Hex Flange Lock, GR 5
HARNESS CLIP (vinyl covered)
HEAT SHIELD
Was 90539
Was 91510
HOSE, Fuel, 1/4 I.D. x 8-1/2” long
HEAT SHIELD, Muffler, V-Twin
MUFFLER, B&S 16HP
used on 20 HP Engine
used on 48” deck only
used on 20 HP engine; Briggs
p/n 394151
31
7026778
1
DEFLECTOR, Direct Out
used with muffler 24241
Footnotes:
NOTE: Purchase engine parts from engine manufacturer dealer.
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
Manual No. 7006176
TP 400-5008-3-HZ-N
SERIES 5 & 6
27
ENGINE COMPONENTS
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
28
ENGINE COMPONENTS
Item Part No
Qty Description
Note
32
33
34
35
36
37
38
39
40
41
42
43
7092025
7040000
7091579
7091738
7091584
7023655
7071921
7091240
7090376
7063252
7090390
7091630
4
1
1
2
3
1
1
2
2
1
1
1
WASHER, M8 Split Lock
MANIFOLD, 20 HP Intec
SCREW, 1/4-20 x 1/2” Hex Flange Lock, GR 5
SCREW, 5/16-18 x 3/4” Socket Head Cap, GR 8
NUT, 1/4-20 Hex Flange Lock, GR 5
LEVER, Throttle Control
series 6
series 6
series 6
series 6
RIVET, Plastic Snap
SCREW, #10-32 x 5/8” Hex Washer Head Machine
NUT, #10-32 Hex Nyloc
CONTROL, Choke
WASHER, 3/8” Internal Tooth Lock
NUT, 3/8-24 Hex
Was 90155
Footnotes:
NOTE: Purchase engine parts from engine manufacturer dealer.
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
Manual No. 7006176
TP 400-5008-3-HZ-N
SERIES 5 & 6
29
CLUTCH ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
30
CLUTCH ASSEMBLY
Item Part No
Qty Description
Note
1
2
3
4
5
7091735
7029138
7029136
7091601
7029117
1
2
2
6
1
BOLT, 7/16-20 x 8” Hex Head, GR 5
WASHER, .468 I.D. x 1.50 O.D. x .188 Flat
BEARING, 6305 w/Snap Ring
NUT, 5/16-18 Hex Flange Lock, GR 5
V-BELT, 5L Sect. Cog, 50.170” effective length
Was 91070
Primary Drive 42” Deck (Dayco
#46-0364)
--
6
7046997
7029107
7046892
7091829
7063269
7091508
7029135
7013250
7063248
7063246
7091301
7090460
7012652
7063247
1
1
1
2
1
6
1
2
1
1
1
1
1
1
V-BELT, 5L Sect. Cog, 49.44” eff. Length- 48” Deck
PULLEY, Jackshaft
Primary Drive 48” Deck
used on 42” Deck Models
used on 48” Deck Models
--
PULLEY, Jackshaft
7
SCREW, 1/4-20 x 1/2” Set w/Patch
SUPPORT, Jackshaft- TG 2000
BOLT, 5/16-18 x 3/4” Short Neck Carriage, GR 5
JACKSHAFT
8
9
10
11
12
13
14
15
16
17
KEY, 1/4” Square x 1”
qty. 1 on 38” units
used on 33” units
BRACKET, Anti-Rotation- TG-2000
CLUTCH, Warner TG-2000 (12V)
WASHER, 7/16” Split Lock
NUT, 7/16-20 Hex, GR 5 or B
WIRE CLIP 7/16”, Vinyl Covered
SPACER, Jackshaft, Warner Clutch
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
31
42" DECK LIFT HANDLE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
32
42" DECK LIFT HANDLE ASSEMBLY
Item Part No
Qty Description
HANDLE, Deck Lift
Note
1
2
7041924
7041925
7058090
7029040
7046489
7090072
7091584
7035489
7090122
7091503
7013996
7058077
7091318
7091601
7046457
7091887
7046491
7046490
7091597
7091530
7074768
1
1
1
1
1
2
3
1
3
2
1
1
1
1
1
1
1
1
1
1
2
BRACKET, Pivot Support
WELDMENT, Deck Lift Handle
WASHER - Slipper
3
4
5
SPRING, Torsion
6
SCREW, 1/4-20 x 5/8” Hex Head Cap, GR5
NUT, 1/4-20 Hex Flange Lock
BAR, Deck Lift
7
Was 90583
8
9
WASHER, 3/8” SAE Flat
HAIR PIN, 3/32 x 1-1/2”
10
11
12
13
14
15
16
17
18
19
20
21
PIN, 3/8 x 2” Clevis
DETENT, Lift Handle
SCREW, 5/16-18 x 3/4” Hex Head Cap, GR5
NUT, 5/16-18 Hex Flange Lock, GR5
DECAL, Deck Position
Was 91070
PIN.38 x .5 Large Head Clevis
PIN, 3/8 x 1-5/8” Clevis
SPACER, Deck Lift
PIN, 3/32 x 3/4” Cotter
BOLT, 1/4-20 x 3/4 Short Neck Carriage, GR5
GRIP, Deck Lift
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
33
48" DECK LIFT HANDLE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
34
48" DECK LIFT HANDLE ASSEMBLY
Item Part No
Qty Description
HANDLE, Deck Lift
Note
1
7041924
7041925
7058090
7029040
7046489
7090072
7091584
7047066
7090122
7091503
7090667
7058077
7091318
7091601
7046457
7091887
7046491
7046490
7091597
7047067
7091948
7091598
7013996
7074768
7091530
1
1
1
1
1
2
2
1
5
2
2
1
1
1
1
1
1
1
2
1
2
2
1
2
1
2
BRACKET, Pivot Support
WELDMENT, Deck Lift Handle
WASHER - Slipper
3
4
5
SPRING, Torsion
6
SCREW, 1/4-20 x 5/8” Hex Head Cap, GR5
NUT, 1/4-20 Hex Flange Lock
LINK, Connector
7
Was 90583
8
9
WASHER, 3/8” SAE Flat
HAIR PIN, 3/32 x 1-1/2”
WASHER, 1/2” SAE Flat
DETENT, Lift Handle
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
SCREW, 5/16-18 x 3/4” Hex Head Cap, GR5
NUT, 5/16-18 Hex Flange Lock, GR5
DECAL, Deck Position
Was 91070
PIN, .38 x .5 Large Head Clevis
PIN, 3/8 x 1-5/8” Clevis
SPACER, Deck Lift
PIN, 3/32 x 3/4” Cotter
PLATE, Connector Arm
PIN, 1/2 x .725 Clevis
PIN, 1/8 x 1” Cotter
Was 90041
PIN, 3/8 x 2” Clevis
GRIP, Deck Lift
BOLT, 1/4-20 x 3/4 Short Neck Carriage, GR5
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
35
42" MOWER DECK ASSEMBLY (Part 1)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
36
42" MOWER DECK ASSEMBLY (Part 1)
Item Part No
Qty Description
* DECK, 42” Replacement
Note
1
7061958
7051914
7091588
7091619
7014407
7026691
7012063
7090824
7033366
7027198
7051747
7044651
7042811
7042812
7091547
7035982
7035983
7035985
7036437
7074467
7090872
7010916
7090372
7091526
7091587
7042650
7090122
7090289
7014241
1
2
14
18
2
2
5
2
2
2
2
1
1
1
4
1
1
1
2
2
1
1
1
1
1
1
2
1
1
2
ASSEMBLY, Spindle Brake
Was 59723
Was 90612
Was 90613
3
BOLT, 3/8-16 x 3/4” Hex Flange Lock, GR5
NUT, 3/8-16 Hex Flange Lock
WASHER, Spindle
4
5
6
BLADE, 21 Inch Standard Lift
WASHER, Cone
7
8
SCREW, 3/8-24 x 1-1/4” Hex Head Cap, GR5
BRACE, Spindle
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
BOLT, 3/8-16 x 1” Hex Flange Lock
ASSEMBLY, Spindle Lock (press fit)
WELDMENT, Stationary Idler
REINFORCEMENT, Right Hand
REINFORCEMENT, Left Hand
BOLT, 3/8-16 x 3/4” Short Neck Carriage
BRACKET, Right Front Deck Lift
BRACKET, Left Front Deck Lift
BRACKET, Left Rear DeckLift
PULLEY, 5-1/4”
Was 90850
NUT, 3/4-16 Hex Jam, GR 8
BOLT, 1/4-20 x 1-1/8” Hex Flange Lock, GR5
SPACER, .26 x .375
NUT, 1/4 - 20 Hex Center Lock (replaces 91099)
BOLT, 3/8-24 x .62 Shoulder
WASHER, .531 x 1.062 x .121 SAE Flat
WELDMENT, Idler Arm
WASHER, 3/8” SAE Flat
NUT, 3/8-24 Hex Center Lock
WASHER, .27 x 1.0 x .065 Flat
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
37
42" MOWER DECK ASSEMBLY (Part 2)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
38
42" MOWER DECK ASSEMBLY (Part 2)
Item Part No
Qty Description
Note
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
7090122
7090289
7014241
7042586
7034815
7010935
7015447
7090390
7090163
7035495
7042585
7032028
7024586
7091310
7021815
7091585
2
1
1
1
1
4
1
1
1
1
1
2
1
1
1
1
WASHER, 3/8” SAE Flat
NUT, 3/8-24 Hex Center Lock
WASHER, .27 x 1.0 x .065 Flat
WELDMENT, Lift Arm, Front
LIFT ARM, Front
shown on previous page only
shown on previous page only
WASHER, 3/4” Flat
ECCENTRIC, Leveling
WASHER, 3/8” Internal Tooth Lock
SCREW, 3/8-24 x 1-1/4” Hex Head Cap w/Nylon Patch, GR5
ROD, Cutter Deck Timing (3/8-16 thread)
WELDMENT, Lift Arm, Rear
WASHER, .781 x 1.5 x .132 Flat
SWIVEL, Brake Link- PM
HAIR PIN, #13
replaces 16231
Was 90546
SPACER, .391 I.D. x .531 long
NUT, 3/8-16 Hex Center Lock
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
39
42" MOWER DECK ASSEMBLY (Part 3)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
40
42" MOWER DECK ASSEMBLY (Part 3)
Item Part No
Qty Description
Note
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
7035835
7091328
7091619
7029265
7091585
7029264
7022717
7017847
7075235
7028728
7028200
7090122
7091503
7024910
7035969
7036561
7012063
7075707
7091553
7018574
7090799
7011791
7091315
7091537
7091303
7051401
7051401
7013010
7091601
7023606
7046720
4
8
8
4
6
4
1
1
1
2
2
5
3
1
1
1
2
1
2
1
2
2
2
2
2
1
1
1
2
2
1
POST, Anti-Scalp
SCREW, 3/8-16 x 1-1/4 Hex Head Cap, GR5
NUT, 3/8-16 Hex Flange Lock
BOLT, 3/8-16 x 2-5/8” Shoulder
NUT, 3/8-16 Hex Center Lock, GR5 or B
WHEEL, Gage
Was 90613
for gage wheel
ROD, Deck Support
RING, .438 External Retaining
BELT, HA Section, (94.5” nom. effective length)
ADJUSTER, Chain (5/16-18 thread)
SWIVEL, Adjustment
WASHER, 3/8” SAE Flat
replaces 91514, 91296
see decal page
HAIR PIN, 3/32 x 1-1/2”
DECAL, 42 Inch
SPRING, Extension 1.03 Dia. X 6.8” long
BELT GUIDE, 38/42 Idler
WASHER, Cone
IDLER, Flat (4.00 O.D.)
SCREW, 3/8-16 x 1-3/4” Hex Head Cap, GR5
IDLER, 4.12” Outside Diameter, Flat
BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR5
RETAINER, 5/16” Bolt
WASHER, .32 x .58 x .08 Split Lock
WING LOCKNUT, 5/16-18
BOLT, 5/16-18 x 1” Short Neck Carriage, GR5
ASSEMBLY, Chute & Decal
WELDMENT, Side Chute
includes items 69 & 70
Was 40497
DECAL, Danger, Cut Finger (CPSC)
NUT, 5/16-18 Hex Flange Lock, GR5
CAP, Vinyl
DECAL, Chute/Deflector
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
41
48" MOWER DECK ASSEMBLY (Part 1)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
42
48" MOWER DECK ASSEMBLY (Part 1)
Item Part No
Qty Description
Note
1
2
3
4
5
6
7
8
9
7013847
7034321
7044848
7047047
7047048
7047049
7074230
7074231
7059240
3
1
1
1
1
1
1
1
1
RETAINER, 3/8” Bolt
STIFFENER, 48” Deck, HOZ
WELDMENT, 48” Deck
HANGER Rear R.H.
HANGER Rear L.H.
BRACKET, Pulley Mounting
BRACKET, Front Lift L.H.
BRACKET, Front Lift R.H.
WELDMENT, Front Lift, 48
Ref: Item 22 on 48” FRONT
FRAME & COVER ASSEMBLY
page
10
11
7091619
7058076
6
1
NUT, 3/8-16 Hex Flange Lock
ASSEMBLY, Idler Arm/Lube Fitting
incl. 46706, Idler Arm Weldment
& one item 12
12
13
14
15
16
17
18
19
20
21
22
23
24
25
7013864
7074951
7071698
7091888
7090799
7091923
7091601
7090122
7091593
7044801
7091169
7091923
7075587
7027168
1
1
LUBE FITTING, Straight (press-fit for .187 dia. Hole)
BRACKET, Hinge, 48” Deck
1
SPACER, Pivot Collar, 48 HOZ
1
BOLT, 3/8-16 x 4” Square Neck Carriage, GR 5
BOLT, 5/16-18 x 5/8” Short Neck Carriage, GR 5
BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR 5
NUT, 5/16-18 Hex Flange Lock, GR 5
WASHER, 3/8” SAE Flat
12
4
19
2
replaces 91514, 91296
2
PIN, 3/8 Self Locking Cotter
4
WELDMENT, Caster Bracket
4
BOLT, 5/16-18X1-1/8” Short Neck Carriage, GR 5
BOLT, 3/8-16 x 3/4” Short Neck Carriage, GR 5
BRACKET, Stationary Idler
2
1
3
SCREW, 5/16-18 x 1” Hex Head Cap, GR 5
Was 90636
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
43
48" MOWER DECK ASSEMBLY (Part 2)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
44
48" MOWER DECK ASSEMBLY (Part 2)
Item Part No
Qty Description
DECAL, Danger, Cut Finger (CPSC)
Note
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
7013010
7035813
7058508
7029425
7075092
7043858
7046301
7046302
7046720
7047093
7047094
7090667
7058524
7072319
--
1
1
1
1
1
8
4
4
1
1
1
2
3
1
1
2
2
1
2
8
4
6
4
3
4
5
4
4
2
1
1
1
3
3
3
see decal page
SPRING, Torsion
SPRING, Extension, 48” HOZ
DISCHARGE CHUTE, Hi Impact Co-Polymer
V-BELT, HA Sect. (120.722” effective length)
BUSHING, Flange, .64 x .75 x .5
SLEEVE, Caster Wheel
WELDMENT, Pivot Yoke, Caster
DECAL, Chute/Deflector
see decal page
BELT COVER, LH
BELT COVER, RH
WASHER, 1/2” Flat
ASSEMBLY, 48” Spindle
ref: 48” Spindle Assembly page
New Hampshire p/n FH-5220-14
see previous two pages
PULLEY, 3-1/4” Dia. Flat Idler
*ASSEMBLY, 48” Painted Mower Deck
LINK, Leveling (3/8-16 thread)
SWIVEL, Support (3/8-16 internal thread)
HINGE PIN
7058086
7058087
7072044
7091810
7076436
7073142
7091503
7091084
7091585
7090993
7090122
7090266
7091628
7014341
7018574
7024431
7034422
7044813
7074467
7014407
BOLT, 3/8-16 x 1-3/4” Short Neck Carriage, GR 5
SPACER, Blade
Was 91158
Was 79226
ROLLER, Low Density Polyethylene
HAIR PIN, 3/32 x 1-1/2”
SCREW, 1/4-20 x 3/8” Hex Washer Self Tap
NUT, 3/8-16 Hex Center Lock
SCREW, 1/2-20 x 4-1/2” Hex Head Cap, GR 5
WASHER, 3/8” SAE Flat
Was 90302
Was 90546
replaces 91514, 91296
Waldes #5133-50
NUT, 1/2-20 Hex Center Lock, GR 5 or B
WASHER, .64 x .99 x .05 Flat
RING, .392 External Retaining
IDLER, 4.12” Outside Diameter, Flat
DECAL, 48” Deck
see decal page
PULLEY, 5” x .375 Flat Idler (Belt Clutch)
PULLEY, Driven, 4.50” O.D.
NUT, 3/4-16 Hex Jam, GR 8
WASHER, Spindle
Myers part no. AM888
also shown on 48” SPINDLE
ASSEMBLY page
Footnotes:
*NOTE: Deck Ass'y 58522 consists of items 2-9, 11, 13, 14, 21, 24, 38, 58 & 60 assembled with appropriate fasteners.
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
45
42" SPINDLE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
46
42" SPINDLE ASSEMBLY
Item Part No
Qty Description
Note
1
2
3
4
5
6
7
8
7051914
7012491
7013313
7051918
7032294
7014407
7027668
7010817
2
2
2
1
1
1
1
1
ASSEMBLY, 42” Spindle
Was 59723 (Includes 2 thru 7)
Truarc part no. N-5000-175
RING, 1-3/4” External Retaining Ring
BALL BEARING, 3/4” I.D.
WELDMENT, Spindle Housing
HOLDER, Blade
Was 47917
WASHER, Spindle
SHAFT, Blade Spindle (3.47 shank length)
FITTING, Lube, Press-In (for .187 dia. Hole)
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
47
48" SPINDLE ASSEMBLY
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
48
48" SPINDLE ASSEMBLY
Item Part No
Qty Description
Note
1
2
7058524
7012491
7013313
7010817
7073405
7044798
7014407
7016440
7090658
7075588
7027168
3
2
2
1
1
1
2
2
1
1
6
ASSEMBLY, 48” Spindle
includes items 2 thru 10
RING, 1-3/4” External Retaining
BALL BEARING, 3/4” I.D.
Truarc part no. N-5000-175
3
4
LUBE FITTING, Press-In (for .187 dia. Hole)
SHAFT, Spindle (7.81” long)
WELDMENT, 48” Spindle Housing
WASHER, Spindle
5
6
7
8
WASHER, .656 Belleville
9
NUT, 5/8-18 Hex Jam
10
11
BLADE, 16-1/2” Low Inertia
SCREW, 5/16-18 x 1” Hex Head Cap, GR 5
Was 90636 (not part of 58524
assembly)
12
7091601
6
NUT, 5/16-18 Hex Flange Lock, GR 5
Was 91070 (not part of 58524
assembly)
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
49
DECALS (Part 1)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
50
DECALS (Part 1)
Item Part No
Qty Description
Note
1
2
7075760
7034817
7075812
7046426
7075811
7075713
7044767
7046457
7024910
7024431
2
1
1
1
1
1
1
1
1
1
DECAL, SNAPPER
DECAL, SCRAMBLER
DECAL, Park Brake
3
4
DECAL, Deck Height
DECAL, Ignition Switch
DECAL, Engine, 18 HP OHV B&S
DECAL, Hydro Reservoir
DECAL, Deck Position
DECAL, 42” Deck
5
6
Simplicity part no. 275124
7
8
9
10
DECAL, 48” Deck
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
51
DECALS (Part 2)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
52
DECALS (Part 2)
Item Part No
Qty Description
Note
11
12
13
14
15
16
17
18
19
7075993
7075810
7071683
7046720
7013010
7073335
7075635
7029113
7078049
1
1
1
1
1
1
1
1
1
DECAL, Warning, Read Manuals & Instructions
DECAL, Operating Instructions
DECAL, Hydro Release
DECAL, Chute/Deflector
DECAL, Danger, Cut Finger (CPSC)
DECAL OPEI Ride-On
DECAL, Service Parts, HOZ Domestic
DECAL, Caution, Fuel (English)
DECAL, Throttle/Choke Control
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
53
ELECTRICAL COMPONENTS (Part 1)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
54
ELECTRICAL COMPONENTS (Part 1)
Item Part No
Qty Description
Note
1A 7075497
1B 7047041
1
1
WIRING HARNESS, 18 HP Briggs
WIRING HARNESS, 14.5 HP Briggs
used on 20 hp engine
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
55
ELECTRICAL COMPONENTS (Part 2)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
56
ELECTRICAL COMPONENTS (Part 2)
Item Part No
Qty Description
RELAY, OPC, Electric Clutch
Note
1
2
7028570
7090411
7012688
7035926
7016835
7042956
7071694
7090977
7022886
7075884
7023355
7090913
7029130
7026343
7035661
7023506
7075622
7090071
7091584
7090053
1
2
2
1
1
1
2
2
1
1
1
3
1
1
1
1
1
2
3
3
SCREW, #10-24 x 1/2” Hex Head Cap
NUT, #10-24 Hex Twin “Whiz” Lock
WIRE HARNESS, Warner Clutch
WIRE, Positive, 13” long
3
4
5
6
WIRE, Negative, 14” long
7
COVER, Battery Cable
8
NUT, 1/4-20 Hex Jam, GR 5 or B
SWITCH, Seat (NO/NC) Snap-In
SWITCH, PTO E.C.
9
10
11
12
13
14
15
16
17
18
19
20
Delta part no. 6201-219
SWITCH, Park Brake (NC/NO)
SCREW, #10-24 x 1/2" Hex Washer Self-Tap (Torx)
BATTERY, 12V, 3 Amp, 190 Cold Cranking Amp
SWITCH, Ignition (After-fire Solenoid)
SPACER, PTO Switch
(Torx)
includes drain tube
not shown
BEZEL
SOLENOID - Super Trombetta- 2 Terminal
SCREW, 1/4-20 x 1/2” Hex Head Cap, GR 5
NUT, 1/4-20 Hex Flange Lock
WASHER, 1/4” Internal Tooth Lock
Was 91314
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
57
WIRING SCHEMATIC (18 hp engine)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
58
WIRING SCHEMATIC (18 hp engine)
Item Part No
Qty Description
* Wiring Schematic includes harness # 75497
Note
*
1
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
59
WIRING SCHEMATIC (20 hp engine)
Manual No. 7006176
TP 400-5008-3-HZ-N
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
60
WIRING SCHEMATIC (20 hp engine)
Item Part No
Qty Description
* Wiring Schematic includes harness # 47041
Note
*
1
Footnotes:
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
Manual No. 7006176
TP 400-5008-3-HZ-N
61
Parts Manual for
SCRAMBLER 42" & 48" HYDRO DRIVE YZ
SERIES 5 & 6
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2005
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No. 7006176
TP 400-5008-3-HZ-N
Revision 3, 7/26/2005
|