Parts Manual for
21" STEEL DECK
WALK BEHIND MOWERS
"MR" SERIES 14 & 15
PUSH MODELS
PROPELLED
MODELS
MCRS215014KWV
MR215014B
EMRP216014B
EMRP216015B
MCRP215014KWV
MCRP215015KWV
MRP216014B
MR215015T
MR216015B
MR216015BV
MR216015T
MRP216015B
MRP216015BV
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No.
7006064
Revision 7, 1/10/2006
TP 400-5160-7-WB-N
Table Of Contents
PAGE
4
GROUP
Handles & Controls
Handles & Controls (Swivel Wheel Model)
Cutting Deck, Blade
8
10
12
14
16
18
20
22
24
30
32
34
36
38
40
42
44
46
48
Front Wheel Bracket (Non-Swivel Wheel Models)
Front Wheel Bracket (Swivel Wheel Model)
Rear Wheel Brackets, Latches
Front Wheels (Non-Swivel Wheel Models)
Front Wheels (Swivel Wheel Model)
Rear Wheel
Drive System Self-Propelled
Transmission (Differential)
Throttle Controls
Decals (Part 1)
Decals (Part 2)
Grass Bag (Non-Swivel Wheel Models)
Grass Bag (Swivel Wheel Model)
Side Chute, Adapter
Accessory - Snapperizer
Accessory - Recycling Kits
Accessory - Thatcherizer
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
3
Handles & Controls
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
4
Handles & Controls
Item Part No
Qty Description
Note
1
7074384
HANDLE, Upper
Was 41933, Used on All Series
14
7074254
HANDLE, Upper
Was 72931, Used on All Series
15
2
7036350
7046737
HANDLE, Middle
Used on Non Commercial
Used on Commercial
HANDLE, Middle
3A 7046502
3B 7047121
4A 7035342
4B 7033986
HANDLE, Lower Left Hand
HANDLE, Lower L.H. Adjustable
HANDLE, Lower Right Hand
HANDLE, Lower R.H. Adjustable
BAIL, OPC Control
Not used on "MCRP" Models
Used on "MCRP" Models
Not used on "MCRP" Models
Used on "MCRP" Models
5
6
7047011
7034872
CLIP, Blade Control
7A 7035808
7046553
CABLE, Blade Control (46-1/16")
CABLE, Blade Control (55-3/4")
CABLE, Blade Control (54-13/16")
CABLE, Blade Control (49-1/4")
CABLE, Blade Control (52-13/16")
HANDLE, Wheel Drive
Used on Series 14 B&S
Used on Series 14 Tecumseh
Used on Series 15 Tecumseh
Used on Series 15 B&S
7073030
7072933
7B 7073444
Was 46702, Used on All Kaw
Used on Self-Propelled
8
9
7032826
7014307
7029775
7023134
7072932
7047092
7012121
7012122
7041871
7091714
7012093
7090188
7023801
7024087
7029783
7032408
7023790
7051698
GRIP, Wheel Drive Handle
GRIP, Wheel Drive Handle
CABLE, Clutch Pull (Z-Bend, 36-3/16" Long)
CABLE, Clutch Pull (Z-Bend, 38-5/8" Long)
CABLE, Clutch Pull (Z-Bend, 38-5/16" Long)
COVER, Vinyl
Used on Self-Propelled
Used on Self-Propelled (Euro)
Used on Propelled Ser. 14 B&S
Used on Propelled Ser. 15 B&S
Used on Propelled (All Kaw)
Used on Self-Propelled
10
11
12
13
14
15
16
17
18
SPRING, Clutch
Used on Self-Propelled
SECTOR, Speed
Used on Self-Propelled
BOLT, 5/16 x 1" Round Head Carriage, Grade 5
SPRING, Speed Control
Was 91238 (Used on All)
Used on Self-Propelled
WASHER, 3/8" Flat
Used on Self-Propelled
GRIP, Speed Control Handle
DECAL, Speed Select
Was 29383, Used on Propelled
Used on Self-Propelled
DECAL, Speed Select
Used on Self-Propelled (Euro)
Used on Self-Propelled
19
20
GUIDE, Lower V-Belt
ROD, Transfer
Used on Self-Propelled
ASSEMBLY, Transfer Rod
Incl. indented items below. Used
on Propelled Euro
20A 7015752
20B 7015753
20C 7090095
LINK, Transfer
Used on Propelled Euro
Used on Propelled Euro
Used on Propelled Euro
Used on Self-Propelled
BALL JOINT, 1/4-28
NUT, 1/4-28 Hex
CLIP, Transfer Rod
21
7010937
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
5
Handles & Controls
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
6
Handles & Controls
Item Part No
Qty Description
Note
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
7090895
7012114
7090595
7090238
7090799
7091601
7046202
7024641
7091740
7035744
7041870
7090391
7076978
7090505
7014343
7023792
7091020
TEE-NUT, 5/16-18
Used on Self-Propelled
Used on Self-Propelled
BUSHING, Differential
BOLT, 5/16-18 x 3/4" Flange Lock, Grade 5
SCREW, 5/16-24 x 1" Hex Cap, Grade 5
BOLT, 5/16-18 x 5/8" Short Neck Carriage, Grade 5
NUT, 5/16-18 Hex Flange Lock, Grade 5
BRACKET, Speed Control Rod
TIE, Wire
Was 91026 (Used on All)
Was 91070 (Used on All)
Used on Self-Propelled
4
4
SCREW, 5/16-18 x 1-7/8 Curved Head, Grade 2
T-KNOB, 5/16-18
Was 91189 (Used on All)
Used on Self-Propelled
LEVER, Speed Control
4
2
WASHER, 5/16 Internal Tooth Lock
NUT, 1/4-20 Hex, Grade 5 or B (2 with Kawasaki Engine)
SCREW, 1/4-20 x 2" Hex Cap, Grade 5
BUSHING
Used on Commercial
2
PIN, Clutch Handle
Used on Self-Propelled
PUSH-NUT, 1/4"
(For handle pin). Used on
Propelled
39
7024211
7029782
7046465
7026219
7091606
7041942
7091576
7091022
7091813
7046707
DECAL, Blade Control (Right Hand Side)
DECAL, Blade Control (Right Hand Side)
GUIDE, Rope
Used on All (Except Euro)
Used on Euro
40
41
42
43
44
45
46
47
CLAMP
NUT, 5/16-24 Hex Center Lock, Grade 5
DECAL, Shift Warning
Was 91074 (Used on All
Used on Self-Propelled
Was 91100 (Used on All)
NUT, 1/4-20 Hex
WASHER, 1/4" Internal Tooth Locking
SCREW, 1/4-20 x 1-3/4 Hex Cap, Grade 5
BRACE
Was 91222 (Used on All)
2
(See "Handles & Controls
(Swivel Wheel Model)"
illustration and parts list for
hardware). Used on Commercial
48
7075634
FOAM GRIP
Was 73115 (Used on All)
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
7
Handles & Controls (Swivel Wheel Model)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
8
Handles & Controls (Swivel Wheel Model)
Item Part No
Qty Description
Note
1
2
7074384
7046737
7033985
7033986
7047011
7034872
7073444
7090595
7090799
7091601
7024641
7091740
7035744
7090391
7076978
7090505
7024211
7046465
7079577
7046669
7046707
HANDLE, Upper
HANDLE, Middle
Was 41933, Used on Swivel
Used on Swivel
3
HANDLE, Lower Left Hand
Used on Swivel
4
HANDLE, Lower Right Hand
CONTROL, Blade
Used on Swivel
5
Used on Swivel
6
CLIP, Blade Control
Used on Swivel
7
CABLE, Blade Control (52-13/16")
BOLT, 5/16-18 x 3/4" Flange Lock, Grade 5
BOLT, 5/16-18 x 5/8" Carriage, Grade 5
NUT, 5/16-18 Hex Flange Lock, Grade 5
TIE, Wire
Was 46702, Used on Swivel
Used on Swivel
8
9
2
3
Was 91026 (Used on Swivel)
Was 91070 (Used on Swivel)
Used on Swivel
10
11
12
13
14
15
16
17
18
19
20
21
4
4
4
3
SCREW, 5/16-18 x 1-7/8 Curved Head, Grade 2
T-KNOB, 5/16-18
Was 91189 (Used on Swivel)
Used on Swivel
WASHER, 5/16 Internal Tooth Lock
NUT, 1/4-20 Hex, Grade 5 or B
SCREW, 1/4-20 x 2" Hex Cap, Grade 5
DECAL, Blade Control (R.H. Side)
GUIDE, Rope
Used on Swivel
Used on Swivel
Used on Swivel
Used on Swivel
Used on Swivel
SCREW, 1/4-20 x 1-1/2" Hex Cap, Grade 5
CABLE, Swivel Lock
Used on Swivel
Used on Swivel
2
BRACES, Handle
Used on Swivel
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
9
Cutting Deck, Blade
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
10
Cutting Deck, Blade
Item Part No
Qty Description
Note
1
7057884
DECK, Mower
(Includes painted Deck with
Decals)
2
3
7091601
7090731
7091169
7090324
7090483
7012063
7041939
7015626
7091214
7090201
7015780
7031968
7091508
7011791
7091601
7010783
7021764
7012927
7026407
10
10
NUT, 5/16-18 Hex Flange Lock, Grade 5
BOLT, 5/16-18 x 1/2" Short Neck Carriage (Gr. 5)
BOLT, 5/16-18 x 1-1/8" Short Neck Carriage, Grade 5
SCREW, 3/8-16 x 1" Self-Tapping (Engine Mounting)
SCREW, 3/8-24 x 1-3/4" Hex Head Cap, Grade 5
WASHER, Cone
Was 90585
4
5
3
2
6
7
8
BLADE, Cutter
9
HUB, Blade Drive 25mm
(Non Commercial Models)
(Non Commercial Models)
10
11
12
13
14
15
16
17
18
19
20
KEY, Woodruff (Briggs)
SCREW, 5/16-18 x 5/16" Hex Socket Set
PULLEY, Engine (25mm I.D. x 2-1/8" O.D.)
SHIELD, Belt Opening Cover
(Non Commercial) Models
(Push Models Only)
Was 90001 (Only 1 Shown)
(Only 1 Shown)
2
2
3
2
BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5
RETAINER, 5/16 Bolt
NUT, 5/16-18 Hex Flange Lock, Grade 5
KEY, Woodruff
Was 91070
(Kawasaki Only)
PULLEY, Engine (7/8" I.D. x 2-1/8" O.D.)
HUB, Blade Drive 7/8"
(Kawasaki Only)
(Kawasaki Only)
BLADE, Cutter (Mulching)
(Quad Edge - Ninja) (Kawasaki
Only)
21
22
23
24
25
7046446
7029000
7090167
7046471
7045264
BAFFLE, Belt
SPACER
SCREW, 3/8-24 x 2" Hex Head Cap, Grade 5
PLUG, 5/16" Square Hole
PLUG, 5/16" Round Hole
(Kawasaki Only)
(qty 3 on Push) (Only 1 Shown)
(qty 3 on Push; qty 2 on Self-
propelled) (1 Shown)
26
27
28
29
30
31
32
33
34
35
36
7091076
7031961
7033863
7090534
7013320
7090702
7041400
7091122
7091192
7029785
7046780
WASHER, 5/16" Flat
(European)
2
WASHER, 7/16" Flat
(European)
COVER, Belt
(European)
SCREW, 5/16-18 x 1/2" Hex Head Cap Grade 5
BUSHING
(European)
(European)
BOLT, 5/16-18 x 2-1/4" Hex Flange Lock
STRUCTURE, Fender
(European)
(European)
4
2
SCREW, 1/4-20 x 1/2" Hex Self-tapping
WASHER, 1/2" Flat
Was 90539 (European)
(For model MCRS215014KWV)
(European)
DECAL, Operator Safety
PLUG, Hole
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
11
Front Wheel Bracket (Non-Swivel Wheel Models)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
12
Front Wheel Bracket (Non-Swivel Wheel Models)
Item Part No
Qty Description
ASSEMBLY, Arm Right Wheel
Note
1
7051886
7051885
7015761
7012325
7027702
(Consists of Items 2, 3, 4, 5A, 6)
(Consists of Items 2, 3, 4, 5B, 6)
ASSEMBLY, Arm Left Wheel
BOLT, 5/16-18 x 3/4" Shoulder
LATCH, Height
2
3
4
GRIP, Latch
5A 7031017
5B 7031016
ARM, Right Wheel (Round Hole)
ARM, Left Wheel (Square Hole)
RETAINER, 5/16" Bolt
NUT, 5/16-18 Hex Flange Lock, Grade 5
BRACKET, Front Wheel
AXLE
(Not shown)
6
7
8
9
7011791
7091601
7074702
7021119
Was 91070
Was 41770
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
13
Front Wheel Bracket (Swivel Wheel Model)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
14
Front Wheel Bracket (Swivel Wheel Model)
Item Part No
Qty Description
WELDMENT, Front Bracket
Note
1
2
7057782
7079577
7090372
7046629
7046668
7090505
7027344
7046628
7013864
7076978
7014106
7057781
7072230
SCREW, 1/4-20 x 1-1/2" Hex Cap, Grade 5
NUT, 1/4-20 Hex Lock
3
4
BRACKET, Swivel Lock
5
SPRING, Torsion
6
BOLT, 1/4-20 x 2" Hex, Grade 5
WASHER, 41/64" Flat
7
4
4
2
Was 15992
8
BUSHING, 5/8" Nylon
9
LUBE FITTING, Straight (press-fit for .187 dia. Hole)
NUT, 1/4-20 Hex Nylok
10
11
12
2
PIN, 1 /4 x 1-3/4" Roll
WELDMENT, L.H. Swivel Bracket
WELDMENT, R.H. Swivel Bracket
Was 57789 (Not Shown)
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
15
Rear Wheel Brackets, Latches
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
16
Rear Wheel Brackets, Latches
Item Part No
Qty Description
Note
1
7012312
7046983
7091012
7035717
7091576
7091601
7054228
BEARING, 9/16
BEARING, 9/16
Was 18767 (Commercial)
2
3
4
5
6
3
6
SCREW, #10-32 x 3/8" Self-Tapping (Torx)
LATCH, Height Adjusting (Long)
NUT, 1/4-20 Hex, Grade 5
Was 90063
Was 91070
NUT, 5/16-18 Hex Flange Lock, Grade 5
ASSEMBLY, Wheel Arm (Right Rear)
(Push Models). (Round
Opening - Includes Items 3, 10,
14, 15, 16)
7
8
7054229
7054230
7054246
7054247
7054247
ASSEMBLY, Wheel Arm (Left Rear)
ASSEMBLY, Wheel Arm (Right Rear)
ASSEMBLY, Wheel Arm (Right Rear)
ASSEMBLY, Wheel Arm (Left Rear)
ASSEMBLY, Wheel Arm (Left Rear)
(Push Models). (Square
Opening - Includes Items 3, 11,
14, 15, 16)
Was 54230 (Self-Propelled
models)(Incl. 1, 2, 3, 12, 14, 15
& 16)
Was 54224 (Commercial
Models)(Includes 1B, 2, 3, 12,
14, 15, 16)
9
Was 54231 (Self-Propelled
Models)(Includes 1, 2, 3, 13, 14,
15, & 16)
Was 54225 (Commercial
Models)(Includes 1B, 2, 3, 13,
14, 15, & 16)
10
11
12
13
14
15
16
17
18
19
7033776
7033775
7032722
7032723
7011078
7011791
7027702
7033494
7033495
7021119
ARM, Round Axle End (Round Opening) (Right Rear)
ARM, Square Axle End (Square Opening) (Left Rear)
ARM, Wheel Right Rear
(Push Models)
(Push Models)
(Self Propelled Models)
(Self Propelled Models)
ARM, Wheel Left Rear
BOLT, 5/16-18 x 1" Shoulder
RETAINER, 5/16 Bolt
GRIP, Latch
BRACKET, Right Rear Wheel
BRACKET, Left Rear Wheel
AXLE
(Rear on Push Models - Also
Front on All)
20
21
7035741
7029008
GUARD, Rear Foot
GUARD, Rear Foot
(Push Models)
(Self-Propelled Models) (except
European)
7042918
7023791
7012616
7091604
7090053
GUARD, Rear Foot
(European)
22
23
24
25
RING
SUPPORT, Foot Guard
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5
WASHER, 1/4 Internal Tooth Lock
Was 90005
Was 91023
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
17
Front Wheels (Non-Swivel Wheel Models)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
18
Front Wheels (Non-Swivel Wheel Models)
Item Part No
Qty Description
WHEEL, 8 x 1.75 Plastic
Note
1
7046990
Was 41938 (Push & Self-
propelled)
2
3
4
5
7035727
7031121
7090377
7031961
WHEEL, 8 x 1.75
(Commercial)
(Commercial)
2
HUB-CAP
NUT, 7/16-20 Hex (Thin)
WASHER, 7/16 x 1" O.D. Flat
(Qty. of (2) for Push & Self-
Propelled & Qty. of 1 for
Commercial Models)
Footnotes:
Always replace Wheel Nut P/N 90377 when removing or replacing wheel.
21" STEEL DECK
"MR" SERIES 14 & 15
Manual No.
7006064
TP 400-5160-7-WB-N
19
Front Wheels (Swivel Wheel Model)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
20
Front Wheels (Swivel Wheel Model)
Item Part No
Qty Description
PIN, Wheel 7/16"x 2.75"
Note
1
2
3
4
7046667
7046708
7035727
7046666
7031961
PIN, Swivel Wheel Lock
WHEEL, 8 x 1.75 Steel
SPACER, Wheel
9
WASHER, 7/16" Flat
Space wheel as needed
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
21
Rear Wheel
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
22
Rear Wheel
Item Part No
Qty Description
WHEEL, 10 x 1.75 Plastic
Note
1
7041987
7035740
7035726
(Push Models)
WHEEL, 10 x 1.75 Plastic
WHEEL, 10 x 1.75
(Self-propelled Models)
2
(Commercial Self-propelled
Model)
7046678
7031960
7090377
7031961
WHEEL, 10 x 1.75 (With Bearing)
HUB-CAP
(Commercial Push Model)
(Commercial Models)
3
4
5
NUT, 7/16-20 Hex (Thin)
WASHER, 7/16 x 1" O.D. Flat
(Qty. of (2) For Push Models &
Qty. of (1) for Self-Propelled
Models)
Footnotes:
Always replace Wheel Nut P/N 90377 when removing or replacing wheel.
21" STEEL DECK
"MR" SERIES 14 & 15
Manual No.
7006064
TP 400-5160-7-WB-N
23
Drive System Self-Propelled
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
24
Drive System Self-Propelled
Item Part No
Qty Description
Note
1
2
7012354
7034179
7051921
7032832
7012124
7091025
7090303
7012117
7072284
7024521
7019383
7012316
7012126
7012111
7031873
7028014
7011025
7090289
7031809
7010937
7023790
7051698
BELT, Poly-Vee
LINK, Differential
ASSEMBLY, Clutch Idler
Includes items 3 thru 7
3
4
5
6
7
8
9
ARM, Clutch Idler
2
2
PULLEY, Idler
SCREW, 1/4-28 x 1-3/8" Hex Head Cap, Grade 5
NUT, 1/4-28 Hex Top Lock
BUSHING, 3/8 I.D. Nylon
SHAFT, Hex Drive
Was 23744
PULLEY, Poly-V (2" O.D.)
PULLEY, Poly-V (2" O.D.)
WASHER, 3/8" Flat
Non Commercial Models
Commercial Models
10
11
12
13
14
15
16
17
18
19
SPRING, Torsion
STUD
HOLDER, Bearing (Inner Half)
BEARING, Ball
O-RING
NUT, 3/8-24 Hex Center Lock, Grade 5
HOLDER, Bearing (Outer Half)
CLIP, 1/4 Right Arc (Transfer Rod)
ROD, Transfer
(Except European)
ASSEMBLY, Transfer Rod
(Incl. items 61, 62 & 63)
(European)
20
7012353
7046784
7053225
7035477
7010746
BELT, Engine Drive
BELT, Engine Drive (Stretch Type Belt)
ASSEMBLY, Driven Disc
PLATE, Thrust
MRP216014B Model
Includes items 21 thru 29
21
22
RING, Retaining
(Qty 2 on Self-Propelled)(Qty 1
on Commercial)
23
7026693
7029027
7090981
7061276
BEARING, Ball
Self-Propelled Models
Commercial Models
Commercial Models
Was 53217
BEARING, Ball
24
25
4
SCREW, #10-32x1/4" Self-Tapping Machine
ASSEMBLY, Hub (Includes 7011108 Bushing & 7090913
Screws)
26
27
28
29
30
31
7023364
7031013
7090913
7010121
7090390
7090122
RING, Driven
Commercial Models
Commercial Models
(Commercial)
PLATE, Ring Retaining
5
3
SCREW, #10-24 x 1/2" Self-Tapping Machine (Torx)
WASHER, 3/4 Shim
Commercial Models
WASHER, 3/8 Internal Tooth Lock
WASHER, 3/8" Flat
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
25
Drive System Self-Propelled
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
26
Drive System Self-Propelled
Item Part No
Qty Description
Note
32
33
34
35
36
37
38
39
40
41
42
43
44
44
7091630
7091511
7090187
7090316
7032831
7061275
7017696
7029025
7032116
7013847
7090947
7090372
7052987
7052987
3
NUT, 3/8-24 Hex, Grade B
Was 90155
Was 90196
NUT, 5/16-18 Hex, Grade 5
WASHER, 5/16 Split Lock
BOLT, 5/16-18 x 3/4" Carriage, Grade 5
CONNECTOR, Transfer Rod
KIT, Drive Disc Assembly
BUSHING
Was 91097
2
SPRING (Wheel Drive & Idler)
ARM, Idler
RETAINER, 3/8" Bolt
BOLT, 1/4-20 x 1-1/2" Carriage, Grade 5
NUT, 1/4-20 Hex Center Lock, Grade 5 or B
ASSEMBLY, Deck Bracket
ASSEMBLY, Deck Bracket
Was 59462 (1999 MRP Model)
(Includes items 44, 45 & 46)
(MCRP Model)
44
45
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
7033774
7012117
7012306
7021758
7090534
7090391
7011724
7091597
7091122
7090731
7091601
7012122
7016380
7012125
7090799
7041855
7090053
7032664
7015753
7090095
7015752
BRACKET, Deck
Was 31919
2
2
BUSHING, Flange Plastic
BUSHING, Flange
Non Commercial Models
Commercial Models
Commercial Models
SPACER
SCREW, 5/16-18 x 1/2" Hex Head Cap, Grade 5
WASHER, 5/16 Internal Tooth Lock
WASHER, Spring
PIN, 3/32 x 1/2" Cotter
Was 90555
Was 90539
2
2
SCREW, 1/4-20 x 1/2" Self-Tapping
BOLT, 5/16-18 x 1/2" Short Neck Carriage, Grade 5
NUT, 5/16-18 Hex Flange Lock, Grade 5
SPRING, Clutch
Was 91070
SCRAPER, Drive Pulley
GUIDE, Thrust Plate
BOLT, 5/16-18 x 5/8" Short Neck Carriage, Grade 5
DISC, Driven (Cantilever)
WASHER, 1/4" Internal Tooth Lock
SHIELD, Hex Shaft
Was 91026
Non Commercial Models
European Models
European Models
European Models
European Models
European Models
JOINT, Ball
NUT, 1/4-28 Hex Grade 5
LINK, Transfer
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
27
Drive System Self-Propelled
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
28
Drive System Self-Propelled
Item Part No
Qty Description
WASHER, 1/4" Flat
BRACKET, Strap
Note
64
65
7091294
7037732
Was 90055 (European Models)
MCRS215014KWV Model
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
29
Transmission (Differential)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
30
Transmission (Differential)
Item Part No
Qty Description
Note
7059070
ASSEMBLY, Transmission
NUT, 5/16-24 Hex Lock
WASHER, Spring
Was 53945 (Includes 1 thru 30)
Was 11201 (Only 2 Shown)
1
2
3
4
5
7092062
7014263
7019213
7011724
7053942
4
2
PULLEY, Poly-Vee Belt
WASHER, Spring
(Only 1 Shown)
ASSEMBLY, Housing Right
(Includes items 6, 7, 8, 9, 10 &
30)
6
7029034
7014155
7012314
7029035
7073963
7016544
7050767
7050830
7012495
7031970
7031965
7090557
7011774
7090189
7051903
7091825
7012543
7050831
7021115
7012500
7011110
7090376
7053939
7029033
7024442
7061017
HOUSING, Right Side
SCREW, 5/16-24 x 1-1/8" Rib Neck, Grade 5
SEAL, 5/8 I.D.
7
3
2
2
8
9
BEARING, Differential
BEARING, Ball
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Was 11767
PLUG, Housing
GEAR, Input
AXLE, Short
GEAR, Differential (46 Tooth)
PLATE
2
2
4
WASHER, Thrust
SCREW, #10-32 x 1-1/2" Hex Head Cap,
GASKET, Housing
(Only 1 Shown)
(1 Shown)
3
4
WASHER, 5/16 Internal/External Tooth Lock
BRACKET, Differential
SCREW, 1/4-20 x 1-1/4" Self-Tapping
SPACER, Axle Gear
AXLE, Long
(Only 1 Shown)
4
4
4
4
GEAR, Pinion (12 Tooth)
SPACER, Pinion Gear
SHAFT, Pinion
NUT, #10-32 Hex Nyloc
ASSEMBLY, Housing Left
HOUSING, Left Side
GASKET, 5/8 O.D.
(Only 1 Shown)
(Includes items 8, 9 & 29)
3
"00" GREASE (32 oz.)
Footnotes:
NOTE: Installing over 4 oz. of grease will cause the differential to leak.
21" STEEL DECK
"MR" SERIES 14 & 15
Manual No.
7006064
TP 400-5160-7-WB-N
31
Throttle Controls
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
32
Throttle Controls
Item Part No
Qty Description
4 Cycle - Conduit Length - 49.00"
Note
7026467
For KAWASAKI Commercial
models only
Footnotes:
NOTE: B&S and Tec. engine models have fixed speed engines. No throttle control used.
21" STEEL DECK
"MR" SERIES 14 & 15
Manual No.
7006064
TP 400-5160-7-WB-N
33
Decals (Part 1)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
34
Decals (Part 1)
Item Part No
Qty Description
DECAL, Blade Control
Note
1A 7024211
2A 7024087
DECAL, Speed Sector (Self-Propelled)
DECAL, Danger
3
4
5
6
7
8
7013010
7029713
7029657
7046357
7041942
7028440
7072921
DECAL, Snapper
DECAL, SNAPPER 3.87 Dia. (Push)
DECAL, Warning
DECAL, Shift Warning (Self-Propelled)
DECAL, Deck Warning
DECAL, Deck Warning
(On Models EMRP216014B &
MR215015T)
9
7029470
DECAL, Patent Numbers
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
35
Decals (Part 2)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
36
Decals (Part 2)
Item Part No
Qty Description
DECAL, Blade Control (Euro)
Note
1B 7029782
2B 7029783
DECAL, Speed Sector (Self-Propelled) (European)
DECAL, CE (European)
10
11
12
13
14
15
7029776
7029779
7029780
7029781
7029784
7073433
7072404
7041827
7036434
7023009
7029785
7046714
7046720
7022841
7073335
DECAL, Spark Plug (European)
DECAL, Primer (European)
DECAL, Air Filter (European)
DECAL, Deck/Chute (European)
DECAL, 2001 Year of Manufacture
DECAL, 1999 Year of Manufacture
DECAL, 1998 Year of Manufacture
DECAL, 1997 Year of Manufacture
DECAL, Noise (European)
(Shown)
(Not shown)
(Not shown)
(Not shown)
16
17
18
19
20
21
DECAL, Operator Safety (European)
DECAL, Deck Snapper
DECAL, Chute/Deflector Warning
DECAL, Warning
DECAL, OPEI
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
37
Grass Bag (Non-Swivel Wheel Models)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
38
Grass Bag (Non-Swivel Wheel Models)
Item Part No
Qty Description
KIT, Grass Bag Catcher
Note
7060935
Was 61919 (Includes 2 thru 4)
Was 54058 (Includes 2 thru 4)
Was 29963
1
2
7059322
7074425
7051906
7042489
7016050
7058037
7047081
7047082
7091984
7012306
7024228
7091601
7072107
7013860
ASSEMBLY, Grass Bag
BAG, Door Type (Wide) (Black) (13" Wide)
ASSEMBLY, Bag Wire (13" Wide)
CONNECTOR, Grass Bag
ADAPTER, Bag
3
4
5
6
ASSEMBLY, Bag Adapter
ADAPTER, Bag
(Includes items 7 thru 14)
7
8
BRACKET, Rope Pulley
SCREW, 5/16-18 x 1-1/4" Pan Head Machine
BUSHING, Flange
9
10
11
12
13
14
PULLEY, Plastic
NUT, 5/16-18 Hex Flange Lock, Grade 5
WASHER, 15/32"
Was 91070
4
4
RIVET, 3/16 x .344
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
39
Grass Bag (Swivel Wheel Model)
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
40
Grass Bag (Swivel Wheel Model)
Item Part No
Qty Description
KIT, Grass Bag Catcher
Note
7060936
(Includes items 1 thru 4)
Was 23774 (Commercial)
1
2
7074426
7050711
7042489
7019247
7016050
7058037
7047081
7047082
7091984
7012306
7024228
7091601
7072107
7013860
BAG, Grass
ASSEMBLY, Slider
3
CONNECTOR, Grass Bag
WIRE, Bag Connector
ADAPTER, Bag
4
5
6
ASSEMBLY, Bag Adapter
ADAPTER, Bag
(Includes items 7 thru 14)
7
8
BRACKET, Rope Pulley
SCREW, 5/16-18 x 1-1/4" Pan Head Machine
BUSHING, Flange
9
10
11
12
13
14
PULLEY, Plastic
NUT, 5/16-18 Hex Flange Lock, Grade 5
WASHER, 15/32" Flat
RIVET, 3/16 x .344
Was 91070
4
4
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
41
Side Chute, Adapter
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
42
Side Chute, Adapter
Item Part No
Qty Description
Note
1
7051951
ASSEMBLY, Bag Adapter & Cover
(For European Models Only).
(Includes items 2 thru 9)
2
3
4
5
6
7
8
9
7016107
7019287
7023000
7091064
7090053
7091576
7032661
7023042
ADAPTER, Grass Bag
COVER, Bag Adapter
HINGE, Chute Cover
5
5
5
BOLT, 1/4-20 x 1/2" Short Neck Carriage, Grade 5
WASHER, 1/4 Internal Tooth Lock
NUT, 1/4-20 Hex, Grade 5
STOP, Cover
Was 91023
Was 91100
MOLDING, Trim
10A 7016050
ADAPTER, Grass Bag
11
12
13
14
15
16
17
18
19
7024340
7090951
7011791
7091508
7042965
7090122
7024085
7029149
7090951
SPACER
NUT, 5/16-18 Hex Flange Center Lock
RETAINER, 5/16 Bolt
2
BOLT, 5/16-18 x 3/4" Short Neck Carriage, Grade 5
CHUTE, Side
Was 90001
Was 91514
2
2
WASHER, 3/8" Flat
WING-NUT, 5/16-18 Nyloc
COVER, 21" Deck
2
NUT, 5/16-18 Large Flange Center Lock
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
43
Accessory - Snapperizer
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
44
Accessory - Snapperizer
Item Part No
Qty Description
Note
7063041
KIT, Snapperizer
(Includes Items 1 Thru 5)
1
2
3
4
5
7051243
7072002
7091297
7090187
7012587
SCREEN, Fastener Assembly
RING, Bottom
3
3
3
NUT, 5/16-24 Hex, Grade 5
WASHER, 5/16 Split Lock
SPRING
Was 90223 (Only 1 Shown)
(Only 1 Shown)
(Only 1 Shown)
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
45
Accessory - Recycling Kits
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
46
Accessory - Recycling Kits
Item Part No
Qty Description
Note
7061200
KIT, Recycling Cover
(Includes Items Below). For 4HP
& above engines
7061201
KIT, Recycling Plug
(Includes Items Below). For 4HP
& above engines
1
2
3
7029149
7016814
7026407
COVER, 21" Deck
PLUG, Chute Adapter
BLADE, 21" Quad Edge Ninja
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
47
Accessory - Thatcherizer
Manual No.
7006064
21" STEEL DECK
TP 400-5160-7-WB-N
"MR" SERIES 14 & 15
48
Accessory - Thatcherizer
Item Part No
Qty Description
Note
7061256
KIT, Thatcherizer
(Includes Items 1 Thru 27)
1
7032891
2
2
6
LATCH, Frame Attachment
BAR, Mount (Right Hand)
BAR, Mount (Left Hand)
ROD, Tine
2A 7026572
2B 7026573
3
7018499
7018700
7019948
7018496
7014100
7018493
7018189
7091705
7091294
7022425
7090825
7091576
7022424
7090015
7091303
7091530
7014098
7090187
7091511
7014101
7014342
7014103
7090250
7014115
7014062
7060965
4
SUPPORT, Wheel
5
TRAY, Tine
6
KIT, Tine Thatching Spring
BUSHING, Wheel Adjuster
AXLE, Wheel
Was 60574
7
8
9
WHEEL, 7.00 x 1.50 Gage
NUT, 1/4-20 Hex Top Lock
WASHER, 1/4 Flat
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
10
4
2
2
2
2
2
6
2
6
6
6
2
4
Was 90761 (Only 9 Shown)
Was 90055
SPRING, Compression
BOLT, 1/4-20 x 1-1/4" Hex, Grade 5
NUT, 1/4-20 Hex, Grade 5
CAP, Vinyl
Was 90063 (Only 1 Shown)
BOLT, 1/4-20 x 2-1/2" Carriage
BOLT, 5/16-18 x 1" Carr., Gr. 5
BOLT, 1/4-20 x 3/4" Carr. Gr. 5
WASHER, Reinforcing
WASHER, 5/16 Split Lock
NUT, 5/16-18 Hex, Gr. 5
NUT, 1/2 Push
(Only 1 Shown)
Was 90383 (Only 1 Shown)
Was 90074
(Only 1 Shown)
(Only 1 Shown)
Was 90196 (Only 1 Shown)
BEARING, Nyliner
SCREW, 5/16-18 x 1/4" Set
WASHER, 1/2 Flat
2
DECAL, Adjustment
DECAL, Thatcherizer
KIT, Adapter
Was 61395
Footnotes:
21" STEEL DECK
Manual No.
7006064
"MR" SERIES 14 & 15
TP 400-5160-7-WB-N
49
Parts Manual for
21" STEEL DECK
WALK BEHIND MOWERS
"MR" SERIES 14 & 15
IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS
WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE
RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS
AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE
SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY.
McDonough, GA, 30253 U.S.A.
COPYRIGHT © 2006
SNAPPER PRODUCTS, INC.
ALL RIGHTS RESERVED.
Manual No.
7006064
Revision 7, 1/10/2006
TP 400-5160-7-WB-N
|