MODEL GC-STWC-61V
THIS MANUALCONTAINS THE OPERATING
INSTRUCTIONS AND SAFETY INFORMA-
TION FORYOUR SCAGACCESSORY. READ-
ING THIS MANUAL WILL PROVIDE YOU
WITH MAINTENANCE AND ADJUSTMENT
PROCEDURES TO KEEPYOURACCESSORY
PERFORMING TO MAXIMUM EFFICIENCY.
THE SPECIFIC MODELS THAT THIS BOOK
COVERS ARE CONTAINED ON THE INSIDE
COVER. BEFORE OPERATING YOUR MA-
CHINE, PLEASE READ ALL THE INFORMA-
TION ENCLOSED.
PART NUMBER 03179
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 INTRODUCTION
A replacement manual is available from your
authorized Scag Service Dealer or by contacting:
Scag Power Equipment, Service Department at P.O.
Box 152, Mayville, WI 53050. You may also contact
manual for this grass catcher can be downloaded by
using the model and serial number or use the contact
form to make your request. Please indicate the
complete model and serial number of your Scag
product when requesting replacement manuals.
This manual has been prepared to provide the
information you need to correctly assemble, operate,
and maintain this grass catcher. Read it carefully and
keep it for future reference.
The replacement of any part on this product by other
than the manufacturer's authorized replacement part
may adversely affect the performance, durability or
safety of this product.
USE OF OTHER THAN ORIGINAL SCAG
REPLACEMENT PARTS WILL VOID THE
WARRANTY.
WARNING
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING
KIT, OR ENTIRE GRASS CATCHER INSTALLED
If additional information or service is needed that is
not outlined in this manual, please contact your Scag
Power Equipment dealer. Scag dealers are trained in
the latest service methods and carry a full line of Scag
replacement parts.
2. Before removing the grass bags, disengage the
mower, stop the engine and wait for all
movement to stop.
When ordering parts, always provide the complete
model number of your catcher.
3. ALWAYS turn the engine OFF, remove the key
and wait for all movement to stop before
servicing or cleaning the mower or the grass
catcher.
All information provided in this manual is based upon
information available at the time of printing. Scag
Power Equipment reserves the right to make changes
at any time without notice or obligation.
1.2 DIRECTION REFERENCE
DANGER
ROTATING BLOWER
BLADES
The "Right" and "Left", "Front" and "Rear" of the
machine are referenced from the normal operating
position.
STOP ENGINE BEFORE
ENTERING CHUTE
CONTACT CAN INJURE
2.1 SAFETY AND OPERATING
INSTRUCTIONS
4. Do not modify or alter any component of the
grass catcher attachment or mower.
-NOTE-
To avoid personal injury, it is imperative that all
safety instructions be observed.
5. Do not allow any passengers to ride on the grass
catcher attachment or on the mower.
1. Read this operator's manual and the
operator's manual that is supplied with the
machine this attachment is used on.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 ASSEMBLY INSTRUCTIONS FOR 61"
CUTTER DECK
4. Install the grass catcher pulley onto the spindle
assembly. Apply loctite to both pulley setscrews
and tighten. See Figure 3-1.
-NOTE-
5. Remove the "Custom-Cut" and "Turbo" baffles
from the cutter deck. Using the original
hardware, install the new "Front" and "Turbo"
baffles. See Figure 3-2.
Use the illustrated parts list as a part number
reference when following the assembly
instructions.
1. Remove all packaging materials. Lay out the
mounting hardware and the catcher assembly
parts for easy access. Prepare the work area
making sure that it is a clean, safe environment.
Front Baffle
61V - 424403
Turbo Baffle
61V - 424212
WARNING
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING
KIT, OR ENTIRE GRASS CATCHER INSTALLED
UNDER SIDE OF
VELOCITY-PLUS
CUTTER DECK SHOWN
2. Remove the discharge chute from the cutter
deck. See Figure 3-1.
FIGURE 3-2
-NOTE-
-NOTE-
Do not discard the discharge chute or
mounting hardware. The discharge chute
MUST be reinstalled anytime the grass
catcher has been removed from the machine.
Do not discard the original "Custom-Cut"
or "Turbo" baffles. These baffles may be
reinstalled anytime the grass catcher has
been removed from the machine.
6. Install the blower mounting bracket to the deck
using carriage bolts (p/n 04003-11), lockwashers,
and nuts. Do not fully tighten the hardware at
this time. See Figure 3-3.
3. Remove the right side belt cover to gain access to
the spindle assembly. Remove the front u-nut
from the cutter deck bracket. See Figure 3-1.
-NOTE-
Retain the original belt cover. This cover
MUST be reinstalled anytime the
complete catcher system is removed.
FLATWASHER
INSTALL PULLEY
ON RH SPINDLE SHAFT -
ON TOP OF EXISTING
SPINDLE DRIVE
PULLEY
REMOVE DISCHARGE
CHUTE AND
HARDWARE
ELASTIC STOP
NUT
REMOVE EXISTING
RT. SIDE BELT
COVER
CARRIAGE BOLT
REMOVE U-NUT
RIGHT SIDE OF
CUTTER DECK SHOWN
(Note: Some parts not shown for viewing purposes.)
FIGURE 3-3
Figure 1- GC-STC-V install art
FIGURE 3-1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Install the blower assembly to the mounting
bracket and secure with the mounting pin.
See Figure 3-4.
12. Install the hopper mounting brackets to the
outside of the frame on the rear of the machine.
See Figure 3-6.
Hopper
Mounting
Brackets
8. Align the blower assembly with the discharge
opening of the cutter deck. Tighten the
hardware for the mounting bracket. See Figure
3-4.
Rear Frame
9. Install the quick pin through the rear hole in the
discharge chute mounting bracket. See Figure 3-
Figure
4
A
GC-STT Install Art
4.
BLOWER
ASSEMBLY
QUICK
PIN
FIGURE 3-6
13. Attach the hood assembly to the machine by
installing the mounting post into the hopper
mounting brackets. Secure with the ring pins
and tighten the locking bolts. See Figure 3-7.
HAIR
PIN
MOUNTING
BRACKET
MOUNTING PIN
TIGHTEN MOUNTING
BRACKET HARDWARE
RIGHT SIDE OF
CUTTER DECK SHOWN
Locking
Bolts
(Note: Some parts not shown for viewing purposes.)
2006 GC-STC-V install art 3
FIGURE 3-4
Ring Pins
Locking
Bolts
10. Install the belt to the spindle pulley. When
replacing the belt, see figure 3-5 below.
Ring Pins
BACK SIDE
IDLER PULLEY
FIGURE 3-7
BLOWER
PULLEY
14. Install the hose from the blower assembly
adapter to the hopper hood and secure using the
8-1/2"clamps.
15. Install the bag assemblies.
SPINDLE
PULLEY
FRONT SIDE
IDLER PULLEY
16. Using the weight support bar as a guide, identify
the four corresponding mounting holes, and the
existing hardware that will need to be removed in
order to secure the weight support bar to the
front of the machine as shown. See Figure 3-8,
Page 4.
FIGURE 3-5
11. Install the new belt covers and secure. See
items number 1 and number 21 on page 10 of the
Blower Mounting Components section in the
Illustrated Parts List for proper installation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
17. Install one 7/16-14 x 1-3/4" hex head bolt into
each of the four mounting holes in the weight
support bar, and through the matching holes in
the caster support weldment. Secure this
assembly to the front of the machine using the
7/16 - 1/2" x 1-1/4" x .083" flatwashers, and the
7/16-14 elastic stop nuts. Torque hardware to
59 ft. lbs. See Figure 3-8.
ADAPTER
BLOWER
ASSEMBLY
QUICK PIN
PIN & HAIR PIN
MOUNTING
BRACKET
RIGHT SIDE OF
CUTTER DECK SHOWN
2006 GC-STC-V removal art 1
(Note: Some parts not shown for viewing purposes.)
FIGURE 4-1
FIGURE 3-8
5. Loosen the locking bolts and remove the two (2)
pins holding the hood assembly to the mounting
posts on the rear of the machine. See Figure
4-2.
18. Operate and test.
4.1 GRASS CATCHER REMOVAL
INSTRUCTIONS
1. Prepare the machine so there is easy and safe
access to the work area. Remove the key and
maintain all safety related work procedures.
Always wear eye and hand protection.
Loosen
Locking
Bolts
2. Remove the bag assemblies from the grass
catcher.
Remove Pins
Loosen
Locking
Bolts
3. Remove the rubber strap holding the adapter to
the blower assembly and the large quick pin
securing the blower to the discharge mounting
bracket. See Figure 4-1.
Remove Pins
FIGURE 4-2
4. Remove the belt, pin, hair pin and large quick pin
securing the blower assembly to the cutter deck
and remove the blower assembly. See Figure 4-
1.
6. With help from an assistant, remove the hood
assembly.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING
KIT, OR ENTIRE GRASS CATCHER INSTALLED
7. Re-install the side discharge chute to the opening
on the cutter deck. Replace the two outside
mounting bolts on the discharge chute with the
clevis pins (p/n 04064-15) and rue cotter pins
(p/n 04069-03). See Figure 4-3.
8. Re-install the cutter deck belt cover.
DISCHARGE
CHUTE
CLEVIS PIN
P/N 04064-15
CLEVIS PIN
P/N 04064-15
RUE COTTER PIN
P/N 04069-03
GC-STC-V removal art 3
FIGURE 4-3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
5.1 MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS
HOURS
Break-In 8 20 40 100 200 500 Procedure
(First 10)
Comments
X
X
X
X
Check all hardware for tightness
Inspect hose and adapter
Check belt for proper alignment
Inspect fabric bags
X
X
X
X
X
*Check screen in hopper
Inspect hose and adapter
Inspect fabric bags
Remove debris from screen
Check condition of blower
*Apply grease to blower bearings
Check belt for proper alignment
See figure below
X
* Perform these maintenance procedures more frequently under extreme dusty or dirty conditions.
GREASE FITTING
ON BEARING HOUSING
GREASE FITTING
ON BEARING HOUSING
BEHIND PULLEY
6
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V BLOWER HOUSING ASSEMBLY
9
10
11
12
8
45
48
4
1
2
14
11
3
13
9
11
7
10
47
10
14
44
27
14
11
12
15
43
42
41
16
14
17
26
39
40
18
25
34
15
17
19
20
14
28
35
21
41
5
38
22
23
17
35
27
24
14
46
R
D
O
T
A
Stop T
engine befo
A
B
N
I
N
24
14
G
G
E
R
B
DO
L
UN
DISCHAR
A
D
NO
LESS
T
O
E
re cleaning or
PERATE MOS
G
GE GU
RASS CA
A
N
D
rem
ARD IS INSTAL
TCHER
O
W
E
L
ovingO
R
W
E
R
LED
R
29
6
30
33
32
37
31
31
35
35
2006 GC-STWC-61V Blower Assembly
35
35 34
36
8
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V BLOWER HOUSING ASSEMBLY
Ref.
No.
Part
Number
Ref.
No.
Part
Number
Description
Description
1
2
3
4
5
6
7
8
04067-10
481547
04066-04
04001-21
481377
482080
481428
483223
04024-02
04021-05
04041-07
43277
Pin, Ring 2-1/4" Long
Lanyard, Deck Height Pin
Quick Pin, 5/16" Dia.
Bolt, Hex Head 3/8-16 x 1-3/4"
Decal, Blower
Decal, Rotating Blower
Grip, Blower Lever
Cap, Square
Nut, Push On 3/8 Thread
Lock Nut, 3/8-16
Flatwasher, 3/8-.391 x .938 x .105
Spacer
Pulley, Idler 4" Dia.
Nut, Elastic Stop 3/8-16
Lockwasher, 3/8-16
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
04019-04
Nut, Serr. Flange 3/8-16
04001-136 Bolt, Hex Head 3/8-16 x 1-1/2 Gr. 8
483037
461931
04003-12
04063-06
461796
483034
04019-03
461930
421319
48136-02
48135-14
482298
04012-04
461932
481522
43212
Decal, Danger
Blower Housing Weldment
Bolt, Carr. 5/16-18 x 3/4" Gr. 5
Key, 1/4 x 1/4 x 1-1/2"
Fan Weldment
Bearing Assembly
9
Nut, Serr. Flange 5/16-18
Blower Housing Assembly, GC-STT
Cover, Blower Housing
Clamp, 8-5/8" Max Dia.
Hose, 8.00" Dia. x 60.50" Long
Pulley, 4-3/4" O.D. - 1" Bore
Set Screw, 5/16-18 x 3/8"
Frame, Blower Mount
Spring, Main Drive
Spacer
Hair Pin Cotter, .177 x 3-1/4"
Adapter w/Strap
Receiver Weldment, Mounting Post
Dust Shield
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
483209
04021-09
04030-04
424361
04003-05
04001-46
04001-81
04001-21
461928
483182
483189
04043-04
43575
482871
Plate, Catcher Mounting
Bolt, Carr. 3/8-16 x 1-1/2"
Bolt, Hex Head 3/8-16 x 2-1/4"
Bolt, Hex Head 3/8-16 x 3-1/2"
Bolt, Hex Head 3/8-16 x 1-3/4"
Idler Arm Assembly
04062-04
461723
451821
424367
Belt, GC-STC
Pulley, 3-1/2" O.D., GC-STC
Washer, 3/8 Hardened
Pivot, Idler
Decal, Belt Cover
9
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V" BLOWER MOUNTING COMPONENTS
UNDER SIDE OF
VELOCITY-PLUS
CUTTER DECK SHOWN
16
16
10
10
11
5
23
2
26
27
23
25
4
6
7
28
1
24
26
8
3
25
25
6
24
13
9
12
21
14
15
15
22
20
16
18
17
19
RIGHT SIDE OF
CUTTER DECK SHOWN
2006 GC-STC-V BMC
10
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V" BLOWER MOUNTING COMPONENTS
Ref. Part
No.
Number
Description
1
483227
Belt Cover, GC-61V
2
3
04029-04
483223
Wingnut, Plastic 3/8" Small
Cap, Square Vinyl
4
5
6
7
8
9
04021-08
461723
Nut, Elastic Stop 1/4-20
Adapter, Blower GC-STC, includes item #7
Flatwasher, 1/4-.312 x .750 x .065
Rubber Strap 7-3/4"
Bolt, Hex Head 1/4-20 x 1-1/4"
Knob W/Stud, 3/8-16 x 1-1/4"
Clevis Pin, 5/16 x 1-1/2"
Pin, Rue Cotter 5/16 Dia.
Pin, Ring 1/2 x 2-1/4"
04040-14
48137-04
04001-59
481625-01
04064-15
04069-03
04067-10
481547
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
Lanyard
482377
Pulley, 5-1/2" Dia. 1.125 Bore
Setscrew, 5/16-18 x 3/8"
Nut, Elastic Stop 3/8-16
Lockwasher, 3/8"
Flatwasher, 3/8-.391 x .938 x .105
Bolt, Carr. 3/8-16 x 1-1/4" Grade 5
Mounting Post Weldment, Blower
Belt Cover, GC-61V
04012-04
04021-09
04030-04
04041-07
04003-11
461894
424328
04110-03
04003-23
04001-09
04040-15
04021-10
424403
U-Nut
Bolt, Carriage 3/8-16 x 1"
Bolt, Hex Head 5/16-18 x 1"
Flatwasher, 5/16-.375 x .875 x .083
Nut, Elastic Stop 5/16-18
Baffle, Front 61" Deck
424212
Baffle, Turbo 61" Deck
11
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V BUCKET SUPPORT COMPONENTS (UPPER)
3
36
37
35
1
6
4
2
3
5
9
11
8
33
4
33
5
23
16
21
22
9
21
16
13
23
32
5
18
31
11
19
13
16
9
16
5
24
9
18
20
16
14
5
4
5
38
16
35
25
17
31
9
34
15
27
30
32
29
26
28
12
10
40
39
7
12
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V BUCKET SUPPORT COMPONENTS (UPPER)
Ref.
No.
Part
Number
Description
1
423302
Screen, Catcher Hood
2
3
4
5
6
7
8
04090-02
04041-19
04001-32
04041-01
461408
Pop Rivet, 3/16 x .652
Flatwasher, 3/16-.196 x .469 x .048
Bolt, Hex Head 3/8-16 x 1-1/4"
Flatwasher, 3/8-.391 x .938 x .105
Hood Assembly, GC-STT (includes items 1, 2 & 3 and items 2 & 15 on page 15)
Bolt, Hex Head 7/16-14 x 1-3/4"
Hinge, Upper LH
04001-117
423258
9
04021-09
04040-11
04001-46
04021-11
04001-20
04001-135
451674
04019-04
04090-03
43546
482304
423436
43212
04021-05
43277
Nut, Elastic Stop 3/8-16
Flatwasher, 7/16-.500 x 1-1/4"
Bolt, Hex Head 3/8-16 x 2-1/4"
Nut, Elastic Stop 7/16-14
Bolt, Hex Head 3/8-16 x 1-1/2"
Bolt, Hex Head 3/8-16 x 1-3/4" Grade 8
Support Weldment, Bag Frame
Nut, Serrated Flange 3/8-16
Rivot, 3/16 x .402 POP
Bushing, Hopper Pivot
Spring, Hood Hinge
Hinge, Lower LH
Spacer
Locknut, 3/8-16
Spacer
Hinge, Upper RH
Hinge, Lower RH
Hose, 8" Dia. x 60-1/2"
Clamp, 8-5/8" Max Dia.
Tube, Filler
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
423259
423261
48135-14
48136-02
482422
482421
Elbow
04001-10
04021-10
04040-15
04041-11
04030-04
482409
04010-25
04021-01
04001-08
451517
Bolt, Hex Head 5/16-18 x 1-1/4"
Nut, Elastic Stop 5/16-18
Flatwasher, 5/16-.375 x .875 x .083
Flatwasher, 3/8- .406 x 1-1/2" x .179
Lockwasher, 3/8" Spring
Latch
Screw, #10-32 x 3/4"
Nut, Elastic Stop #10-32
Bolt, Hex Head 5/16-18 x 3/4"
Support Weldment, Weights
Weight Assembly
461097
13
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61V BUCKET SUPPORT COMPONENTS (LOWER)
1
2
24
22
23
21
18
"A"
20
19
3
4
5
17
16
6
11
13
7
15
TO "A"
4
4
4
5
8
6
14
7
12
3
4
8
6
FRAME
9
6
5
4
STC 2002 BSC
9
10
10A
14
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STWC-61 BUCKET SUPPORT COMPONENTS (LOWER)
Ref. Part
No.
Number
Description
1
2
04090-02
482321
Pop Rivet, 3/16 x .652
Seal, Hood
3
423262
Tube, Upright
4
5
6
7
8
9
04041-07
04021-09
04020-04
04021-05
04067-07
04001-19
451726
Flatwasher, 3/8-.391 x .938 x .105
Nut, Elastic Stop 3/8-16
Nut, 3/8-16
Hex Lock Nut, 3/8-16
Pin, Ring 1/2 x 2-1/4"
Bolt, Hex Head 3/8-16 x 1"
Mounting Bracket Weldment RH
Mounting Bracket Weldment LH
Lock Nut, 1/4-20 Center
Bolt, Hex Head 3/8-16 x 2-1/4"
Bolt, Hex Head 3/8-16 x 2-1/2"
Bag Assembly, GC-STT
Retainer, Seal
10
10A
11
12
13
14
15
16
17
18
19
20
21
22
23
24
451725
04021-02
04001-46
04001-31
482569
423312
451674
04003-02
04001-08
423198
04003-12
423197
04019-03
04040-15
04021-10
Support, Bag Frame
Bolt, Carr. 1/4-20 x 3/4"
Bolt, Hex Head 5/16-18 x 3/4"
Mount, Bag Frame Tube
Bolt, Carr. 5/16-18 x 3/4"
Tube, Bag Support
Nut, Serr. Flange 5/16-18
Flatwasher, 5/16-.375 x .875 x .083
Nut, Elastic Stop 5/16-18
15
Download from Www.Somanuals.com. All Manuals Search And Download.
GC-STC DECALS
482871
482871
482275
MANUFACTURED UNDER ONE OR MORE
OF THE FOLLOWING PATENTS:
4,487,006 4,885,903 4,920,733 4,967,543
4,991,382 4,998,948 5,042,239 5,118,617
5,133,176 5,826,416 5,832,708 5,865,018
6,192,666 6,766,633 6,892,519
PATENTS PENDING
483044
481327
481377
483037
482080
482080
16
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY- COMMERCIAL ACCESSORY
AnypartoftheScagcommercialaccessorymanufacturedbyScagandfound,inthereasonablejudgmentofScag,
tobedefectiveinmaterialorworkmanship,willberepairedorreplacedbyanAuthorizedScagServiceDealerwithout
charge for parts and labor.
The Scag accessory, including any defective part, must be returned to an Authorized Scag Service Dealer within
the warranty period. The expense of delivering the accessory to the dealer for warranty work and the expense of
returningitbacktotheownerafterrepairorreplacementwillbepaidforbytheowner. Scag’sresponsibilityinrespect
toclaimsislimitedtomakingtherequiredrepairsorreplacements,andnoclaimofbreachofwarrantyshallbecause
for cancellation or rescission of the contract of sale of any Scag machine. Proof of purchase will be required by the
dealer to substantiate any warranty claim. All warranty work must be performed by an Authorized Scag Service
Dealer.
This warranty is limited to 90 days from the date of original retail purchase for any Scag accessory that is used for
commercial purposes, or any other income-producing purpose including rental use.
This warranty does not cover any accessory that has been subject to misuse, neglect, negligence, or accident, or
thathasbeenoperatedinanywaycontrarytotheoperating instructionsasspecifiedintheOperator'sManual. The
warranty does not apply to any damage to the accessory that is the result of improper maintenance, or to any
accessory or parts that have not been assembled or installed as specified in the Operator's Manual.
The warranty does not cover any accessory that has been altered or modified. In addition, the warranty does not
extend to repairs made necessary by normal wear, or by the use of parts or accessories which, in the reasonable
judgment of Scag, are either incompatible with the Scag mower or adversely affect its operation, performance or
durability. This warranty does not cover engines and electric starters, which are warranted separately by their
manufacturer.
ScagPowerEquipmentreservestherighttochangeorimprovethedesignofanyaccessorywithoutassumingany
obligation to modify any accessory previously manufactured.
All other implied warranties are limited in duration to the 90 day warranty period. Accordingly, any such implied
warranties including merchantability, fitness for a particular purpose, or otherwise, are disclaimed in their entirety
after the expiration of the appropriate ninety day warranty period. Scag’s obligation under this warranty is strictly
andexclusivelylimitedtotherepairorreplacementofdefectivepartsandScagdoesnotassumeorauthorizeanyone
toassumeforthemanyotherobligation. Somestatesdonotallowlimitationsonhowlonganimpliedwarrantylasts,
so the above limitation may not apply to you.
Scagassumesnoresponsibilityforincidental,consequentialorotherdamagesincluding,butnotlimitedto,expense
forgasoline,oil,expenseofdeliveringthemachinetoanAuthorizedScagServiceDealerandexpenseofreturning
it back to the owner, mechanic’s travel time, telephone or telegram charges, rental of a like product during the time
warranty repairs are being performed, travel, loss or damage to personal property, loss of revenue, loss of use of
the mower, loss of time, or inconvenience. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2005
PART NO. 03179
PRINTED 8-2005
PRINTED IN USA
SCAG POWER EQUIPMENT
DIVISION OF METALCRAFT OF MAYVILLE, INC.
WWW.SCAG.COM
Download from Www.Somanuals.com. All Manuals Search And Download.
|