I3284VWH
©2014 AOC. All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulation...............................................................................................................................................................52
FCC Notice ......................................................................................................................................................52
WEEE Declaration...........................................................................................................................................53
RoHS Declaration for India...............................................................................................................................53
EPA Energy Star..............................................................................................................................................54
Service....................................................................................................................................................................55
Warranty Statement for Europe.......................................................................................................................55
Warranty Statement for Middle East and Africa (MEA) ...................................................................................57
AOC International (Europe) B.V......................................................................................................................59
Warranty Statement for North & South America (excluding Brazil) ...........................................................60
EASE PROGRAME ........................................................................................................................................62
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
National Conventions
The following subsections describe notational conventions used in this document.
Notes, Cautions, and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer system.
CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the
problem.
WARNING: A WARNING indicates the potential for bodily harm and tells you how to avoid the problem. Some
warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific
presentation of the warning is mandated by regulatory authority.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
The monitor should be operated only from the type of power source indicated on the label. If you are not sure
of the type of power supplied to your home, consult your dealer or local power company.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect
the monitor from damage due to power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate
configured receptacles marked between 100 - 240V ~, Min. 5A
The wall socket shall be installed near the equipment and shall be easily accessible.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a
person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by
the manufacturer or sold with this product. Follow the manufacturer’s instructions when installing the product and
use mounting accessories recommended by the manufacturer. A product and cart combination should be moved
with care.
Never push any object into the slot on the monitor cabinet. It could damage circuit parts causing a fire or
electric shock. Never spill liquids on the monitor.
Do not place the front of the product on the floor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit
instructions.
Leave some space around the monitor as shown below. Otherwise, air-circulation may be inadequate hence
overheating may cause a fire or damage to the monitor.
See below the recommended ventilation areas around the monitor when the monitor is installed on the wall or with
the stand:
Installed on the wall
Installed with stand
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning
Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of
strong-detergent which will cauterize the product cabinet.
When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough
as it will scratch the screen surface.
Please disconnect the power cord before cleaning the product.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Other
If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and
contact a Service Center.
Make sure that the ventilating openings are not blocked by a table or curtain.
Do not engage the LCD monitor in severe vibration or high impact conditions during operation.
Do not knock or drop the monitor during operation or transportation.
For display with glossy bezel the user should consider the placement of the display as the bezel may cause
disturbing reflections from surrounding light and bright surfaces.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Contents Of the Box
Monitor
Base
Stand
CD Manual
Power Cable
*
*
*
*
HDMI Cable
Audio Cable
Analog Cable
DVI Cable
Not all signal cables (Analog, DVI, Audio and HDMI cables) will be provided for all countries and regions. Please
check with the local dealer or AOC branch office for confirmation.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Monitor
Cable Connections In Back of Monitor and Computer:
5
6
1
2
3
4
1. Power
HDMI
2.
3.
4.
DVI
Analog (DB-15 VGA cable)
5. Audio
6. Earphone
To protect equipment, always turn off the PC and LCD monitor before connecting.
1. Connect the power cable to the AC port on the back of the monitor.
2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the
computer's D-Sub port.
3. Connect one end of the DVI cable to the back of the monitor and connect the other end to the computer’s DVI
port.
4. Optional –(Requires a video card with HDMI port) - Connect one end of the HDMI cable to the back of the
monitor and connect the other end to the computer’s HDMI port.
5. Turn on your monitor and computer.
If your monitor displays an image, installation is complete. If it does not display an image, please refer
Troubleshooting.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4.
Click DISPLAY.
5. Set the resolution SLIDE-BAR to Optimal preset resolution
13
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Click Display Settings.
6 Set the resolution SLIDE-BAR to Optimal preset resolution
15
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Click SETTINGS.
7 Set the resolution SLIDE-BAR to Optimal preset resolution
Windows ME/2000
For Windows ME/2000:
1 Click START.
2 Click SETTINGS.
3 Click CONTROL PANEL.
4 Double click DISPLAY.
5 Click SETTINGS.
6 Set the resolution SLIDE-BAR to Optimal preset resolution
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Hotkeys
1
3
4
5
2
1
2
Source/Auto/Exit
Menu/Enter
3
4
5
Volume
Clear Vision
Power
Power
Press the Power button to turn on/off the monitor.
Volume
When there is no OSD, press Volume adjust volume.
Auto / Exit
When there is no OSD, press Auto / Exit button continuously about 3 second to do auto configure.
Source hot key
When the OSD is closed, press Source button will be Source hot key function. Press Source button to
select
the input source showed in the message bar , press Menu/Enter button to change to the source selected.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Clear Vision
1. When there is no OSD, Press the left button to activate Clear Vision.
2. Use the left or right buttons to select between weak, medium, strong, or off settings. Default setting is
always “off”.
3. Press and hold left button for 5 seconds to activate the Clear Vision Demo, and a message of “Clear Vision
Demo: on” will be display on the screen for a duration of 5 seconds. Press Menu or Exit button, the message
will disappear. Press and hold left button for 5 seconds again, Clear Vision Demo will be off.
Clear Vision function provides the best image viewing experience by converting low resolution and blurry images
into clear and vivid images.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Setting
Basic and simple instruction on the control keys.
Luminance
Image Setup
Color Setup
Gamma
Picture Boost
Gamma 1
OSD Setup
Extra
Exit
Contrast
50
50
Brightness
DCR
Off
Eco mode
Standard
Overdrive
Medium
1. Press the MENU button to activate the OSD window.
2. Press left button or right button to navigate through the functions. Once the desired function is
highlighted, press the MENU button to activate. Press left button or right button to navigate through
the sub-menu. Once the desired function is highlighted, press MENU button to activate.
3. Press left button or right button to change the settings of the selected function. Press AUTO to exit. If you
want to adjust any other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then
press power-button to turn the monitor on. To un-lock the OSD, press and hold the MENU button while the
monitor is off and then press power-button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of "Input Select" is disabled.
2. If the product screen size is 4:3 or input signal resolution is wide format, the item of "Image Ratio" is disabled.
3. One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are
turned off accordingly.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Luminance
Luminance
Image Setup
Standard
Color Setup
Gamma
Picture Boost
Gamma 1
OSD Setup
Extra
Exit
Contrast
50
50
Brightness
DCR
Off
Eco mode
Overdrive
Medium
1 Press
(Menu) to display menu.
2 Press left button or right button to select
(Luminance), and press
to enter.
3 Press left button or right button to select submenu, and press
4 Press left button or right button to adjust.
to enter.
5 Press
to exit.
Brightness
Contrast
0-100
0-100
Backlight Adjustment.
Contrast from Digital-register.
Standard
Text
Standard Mode.
Text Mode.
Internet
Game
Movie
Internet Mode.
Game Mode.
Movie Mode.
Sports Mode.
Eco mode
Sports
Gamma1
Gamma2
Gamma3
Off
Adjust to Gamma 1.
Gamma
DCR
Adjust to Gamma 2.
Adjust to Gamma 3.
Disable dynamic contrast ratio.
Enable dynamic contrast ratio.
Adjust the response time
On
Weak
Medium
Strong
Off
Overdrive
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Setup
Image Setup
Color Setup
Picture Boost
H. Position
V. Position
OSD Setup
Extra
Exit
Luminance
Clock
50
50
50
50
Phase
Sharpness
50
1 Press
(Menu) to display menu.
2 Press left button or right button to select
(Image Setup), and press
to enter.
3 Press left button or right button to select submenu, and press
4 Press left button or right button to adjust.
to enter.
5 Press
to exit.
Clock
0-100
0-100
0-100
0-100
0-100
Adjust picture Clock to reduce Vertical-Line noise.
Adjust Picture Phase to reduce Horizontal-Line noise.
Adjust picture sharpness.
Phase
Sharpness
H.Position
V.Position
Adjust the horizontal position of the picture.
Adjust the vertical position of the picture.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Setup
Color Setup
Picture Boost
OSD Setup
Red
Extra
Exit
Luminance
Image Setup
Color Temp.
DCB Mode
Warm
Off
50
50
Green
Blue
DCB Demo
Off
50
1 Press
(Menu) to display menu.
2 Press left button or right button to s(Color Setup), and press
to enter.
3 Press left button or right button to select submenu, and press
4 Press left button or right button to adjust.
to enter.
5 Press
to exit.
Warm
Normal
Cool
Recall Warm Color Temperature from EEPROM.
Recall Normal Color Temperature from EEPROM.
Recall Cool Color Temperature from EEPROM.
Recall SRGB Color Temperature from EEPROM.
Red Gain from Digital-register.
Color setup.
sRGB
Red
User
Green
Green Gain Digital-register.
Blue
Blue Gain from Digital-register.
Full Enhance
Nature Skin
Green Field
Sky-blue
on or off
on or off
on or off
on or off
on or off
on or off
Disable or Enable Full Enhance Mode.
Disable or Enable Nature Skin Mode.
Disable or Enable Green Field Mode.
Disable or Enable Sky-blue Mode.
DCB Mode
DCB Demo
AutoDetect
Disable or Enable AutoDetect Mode.
Disable or Enable Demo.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Boost
Picture Boost
OSD Setup
ON
Extra
Brightness
Contrast
Exit
Luminance
Image Setup
H. Position
V. Position
Color Setup
Bright Frame
Frame Size
50
50
50
50
14
1 Press
(Menu) to display menu.
2 Press left button or right button to select
(Picture Boost), and press
to enter.
3 Press left button or right button to select submenu, and press
4 Press left button or right button to adjust.
to enter.
5 Press
to exit.
Frame Size
Brightness
Contrast
14-100
0-100
0-100
Adjust Frame Size.
Adjust Frame Brightness.
Adjust Frame Contrast.
H. position
V. position
Bright Frame
0-100
Adjust Frame horizontal position.
Adjust Frame vertical position.
Disable or Enable Bright Frame.
0-100
on or off
24
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Setup
OSD Setup
Extra
English
Exit
Luminance
Image Setup
Color Setup
Transparence
Break Reminder
Picture Boost
25
Language
Timeout
H. Position
V. Position
50
0
120
Off
1 Press
(Menu) to display menu.
2 Press left button or right button to select
(OSD Setup), and press
to enter.
3 Press left button or right button to select submenu, and press
4 Press left button or right button to adjust.
to enter.
5 Press
to exit.
H. Position
V. Position
0-100
0-100
5-120
0-100
Adjust the horizontal position of OSD.
Adjust the vertical position of OSD.
Timeout
Adjust the OSD Timeout.
Transparence
Language
Adjust the transparence of OSD.
Select the OSD language.
Disable or Enable
Break Reminder
(1 hour of work, break ?) /
(2 hours of work, break ?)
on or off
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra
Extra
Exit
Luminance
Image Ratio
Image Setup
4 : 3
Color Setup
Picture Boost
OSD Setup
Input Select
Auto Config.
Auto
Yes
Resolution : 1024(H)X768(V)
H. Frequency : 60KHz
DDC/CI
Reset
Yes
No
Off Timer
00
V. Frequency : 60Hz
1 Press
(Menu) to display menu.
2 Press left button or right button to select
(Extra), and press
to enter.
to enter.
3 Press left button or right button to select submenu, and press
4 Press left button or right button to adjust.
5 Press
to exit.
Input Select
Auto Config
Off timer
Auto / Analog / DVI / HDMI
yes or no
Select input signal source.
Auto adjust the picture to default.
0-24hrs
Select DC off time.
Image Ratio
DDC-CI
Reset
wide or 4:3
yes or no
yes or no
Select wide or 4:3 format for display.
Turn ON/OFF DDC-CI Support.
Reset the menu to default.
Show the information of the main image
and sub-image source.
Information
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Exit
Exit
Luminance
Image Setup
Color Setup
Picture Boost
OSD Setup
Extra
1 Press
(Menu) to display menu.
2 Press left button or right button to select
3 Press to exit.
(Exit), and press
to enter.
Exit
Exit the main OSD.
LED Indicator
Status
LED Color
Full Power Mode
Active-off Mode
White
Blinking white
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click on the “Display” icon.
6. Click on the “Change display settings” button.
7. Click the “Advanced Settings” button.
8. Click the “Monitor” tab and then click the “Properties” button.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Click the “Driver” tab.
10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and
then click the "Browse my computer for driver software" button.
11. Select "Let me pick from a list of device drivers on my computer".
30
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:
X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
13. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.
14. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk
drive.
15. Close all open windows and remove the CD.
16. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click on the “Change display settings” button.ꢀ ꢀ
5. Click the “Advanced Settings” button.
6. Click the “Monitor” tab and then click the “Properties” button.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Click the “Driver” tab.
8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “ and then
click the "Browse my computer for driver software" button.
9. Select "Let me pick from a list of device drivers on my computer".
34
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory:
X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive).
11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button.
12. Select your monitor model and click the “Next” button. The files will be copied from the CD to your hard disk
drive.
13. Close all open windows and remove the CD.
14. Restart the system. The system will automatically select the maximum refresh rate and corresponding Color
Matching Profiles.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for
your monitor is completed. The monitor can be used as is.
If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue".
5. Click "Update Driver..." in the "Driver" tab.
6. Check the "Browse my computer for driver software" checkbox and click "Let me pick from a list of device
drivers on my computer".
7. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive
F:\Driver (CD-ROM Drive).
8. Select your monitor model and click on the 'Next' button.
9. Click "Close" ė "Close" ė "OK" ė "OK" on the following screens displayed in sequence.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Select the 'Settings' tab then click on the 'Advanced' button.
6. Select 'Monitor' tab
-
-
If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
If the 'Properties' button is active, click on 'Properties' button.
Please follow the steps below.
7. Click on the 'Driver' tab and then click on 'Update Driver...' button.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button.
9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button.
10. Click on the 'Have disk...' button, then click on the 'Browse...' button and then select the appropriate drive F:
(CD-ROM Drive).
11. Click on the 'Open' button, then click the 'OK' button.
12. Select your monitor model and click on the 'Next' button.
-
If you can see the 'has not passed Windows® Logo testing to verify its compatibility with Windows® XP'
message, please click on the 'Continue Anyway' button.
13. Click on the 'Finish' button then the 'Close' button.
14. Click on the 'OK' button and then the 'OK' button again to close the Display Properties dialog box.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 2000
1. Start Windows® 2000
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select 'Monitor'
-
-
If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation.
If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below.
6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'Next' button.
7. Select 'Display a list of the known drivers for this device so that I can choose a specific driver', then click on
'Next' and then click on 'Have disk...'.
8. Click on the 'Browse...' button then select the appropriate drive F: ( CD-ROM Drive).
9. Click on the 'Open' button, then click on the 'OK' button.
10. Select your monitor model and click on the 'Next' button.
11. Click on the 'Finish' button then the 'Close' button.
If you can see the 'Digital Signature Not Found' window, click on the 'Yes' button.
Windows ME
1. Start Windows® Me
2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'.
3. Double click on the 'Display' Icon.
4. Select the 'Settings' tab then click on 'Advanced...'.
5. Select the 'Monitor' button, then click on 'Change...' button.
6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button.
7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click
on 'Next' and then click on 'Have Disk...'.
8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button.
9. Click on the 'OK' button, select your monitor model and click on the 'Next' button.
10. Click on 'Finish' button then the 'Close' button.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
i-Menu
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on
screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation
guide.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
e-Saver
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown
functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or
Screen Saver); the actual shutdown time depends on your preferences (see example below).
Please click on "driver/e-Saver/setup.exe" to start installing the e-Saver software, follow the install wizard to
complete software installation.
Under each of the four PC status, you may choose from the pull-down menu the desired time (in minutes)you’re
your monitor to automatically shutdown. The example above illustrated:
1. The monitor will never shutdown when the PC is powered on.
2. The monitor will automatically shutdown 5 minutes after the PC is powered off.
3. The monitor will automatically shutdown 10 minutes after the PC is in sleep/stand-by mode.
4. The monitor will automatically shutdown 20 minutes after the screen saver appears.
You can click “RESET” to set the e-Saver to its default settings like below.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen+
Welcome to "Screen+" software by AOC. Screen+ software is a desktop screen splitting tool; it splits the desktop
into different panels, and each panel displays a different window. You only need to drag the window to a
corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier.
Please follow the installation software to install it.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshoot
Problem & Question
Possible Solutions
Make sure the power button is ON and the Power Cord is properly connected
to a grounded power outlet and to the monitor.
Power LED Is Not ON
Is the power cord connected properly?
Check the power cord connection and power supply.
Is the cable connected correctly?
(Connected using the D-sub cable)
Check the DB-15 cable connection.
(Connected using the DVI cable)
Check the DVI cable connection.
* DVI input is not available on every model.
(Connected using the HDMI cable)
Check the HDMI cable connection.
* HDMI input is not available on every model.
If the power is on, reboot the computer to see the initial screen (the login
screen), which can be seen.
No images on the screen
If the initial screen (the login screen) appears, boot the computer in the
applicable mode (the safe mode for Windows ME/XP/2000) and then change
the frequency of the video card.
(Refer to the Setting the Optimal Resolution)
If the initial screen (the login screen) does not appear, contact the Service
Center or your dealer.
Can you see "Input Not Supported" on the screen?
You can see this message when the signal from the video card exceeds the
maximum resolution and frequency that the monitor can handle properly.
Adjust the maximum resolution and frequency that the monitor can handle
properly.
Make sure the AOC Monitor Drivers are installed.
Adjust the Contrast and Brightness Controls.
Press for auto adjust.
Picture Is Fuzzy & Has
Make sure you are not using an extension cable or switch box. We
recommend plugging the monitor directly to the video card output connector
on the back.
Ghosting Shadowing Problem
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Move electrical devices that may cause electrical interference as far away
from the monitor as possible.
Picture Bounces, Flickers Or
Wave Pattern Appears In The
Picture
Use the maximum refresh rate your monitor is capable of at the resolution
you are using.
The Computer Power Switch should be in the ON position.
The Computer Video Card should be snugly fitted in its slot.
Make sure the monitor's video cable is properly connected to the computer.
Inspect the monitor's video cable and make sure no pin is bent.
Make sure your computer is operational by hitting the CAPS LOCK key on
the keyboard while observing the CAPS LOCK LED. The LED should either
turn ON or OFF after hitting the CAPS LOCK key.
Monitor Is Stuck In Active
Off-Mode"
Missing one of the primary
colors (RED, GREEN, or
BLUE)
Inspect the monitor's video cable and make sure that no pin is damaged.
Make sure the monitor's video cable is properly connected to the computer.
Screen image is not centered
or sized properly
Adjust H-Position and V-Position or press hot-key (AUTO).
Adjust RGB color or select desired color temperature.
Picture has color defects
(white does not look white)
Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and
Horizontal or vertical
FOCUS.
disturbances on the screen
Press to auto-adjust.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Specification
General Specification
Model name
I3284VWH
Driving system
Viewable Image Size
TFT Color LCD
80.1cm diagonal
0.36375(H)mm x 0.36375(V)mm
Pixel pitch
Panel
Video
R, G, B Analog lnterface & HDMI lnterface
Separate Sync.
Display Color
Dot Clock
H/V TTL
16.7M Colors
170MHz
Horizontal scan range
30 kHz - 83 kHz
Horizontal scan Size(Maximum) 698.4mm
Vertical scan range
Vertical scan Size(Maximum)
Optimal preset resolution
Plug & Play
50 Hz - 76 Hz
392.85mm
1920×1080@60Hz
VESA DDC2B/CI
Input Connector
VGA/DVI/HDMI
Resolution
Input Video Signal
Power Source
Analog: 0.7Vp-p(standard), 75 OHM, TMDS,HDMI
100-240VAC, 50/60Hz, 1.5A
Active 45W (typical) (Test condition: Contrast = 50, Brightness = 90
@standard mode)
Power Consumption
Standby < 0.5 W
0-24 hrs
Off timer
Connector Type
VGA/DVI/HDMI
Detachable
Physical
Characteristics
Signal Cable Type
Temperature:
Operating
0° to 40°
Non-Operating
Humidity:
-25°ʳto 55°
Environmental Operating
Non-Operating
10% to 85% (non-condensing)
5% to 93% (non-condensing)
Altitude:
Operating
0~ 5000m (0~ 16404 ft )
0~ 12192m (0~ 40000 ft )
Non-Operating
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Display Modes
HORIZONTAL
VERTICAL
STANDARD
RESOLUTION
FREQUENCY(kHZ)
FREQUENCY(Hz)
IBM MODES
640x350@70Hz
640x480@60Hz
640x480@72Hz
640x480@75Hz
640x480@67Hz
720x400@70Hz
800x600@56Hz
800x600@60Hz
800x600@72Hz
800x600@75Hz
832x624@75Hz
1024x768@60Hz
1024x768@70Hz
1024x768@75Hz
1024x768@75Hz
1280x1024@60Hz
1280x1024@75Hz
1440x900@60Hz
1680x1050@60Hz
1920x1080@60Hz
1280x960@60HZ
31.469
31.469
37.861
37.500
35.000
31.469
35.156
37.879
48.077
46.875
49.725
48.363
56.476
60.023
60.241
63.981
79.976
55.935
64.674
67.500
60.000
70.087
59.940
72.809
75.00
VGA
IBM MODES
66.667
70.087
56.250
60.317
72.188
75.000
74.551
60.004
70.069
75.029
74.927
60.020
75.025
59.887
59.883
60.000
60.000
MAC MODE VGA
SVGA
MAC MODE SVGA
XGA
MAC MODE XGA
SXGA
WXGA+
WSXGA
HD
*
HDMI timing
Format
480p
Resolution
Vertical frequency
60Hz
640x480
720x480
720x576
1280x720
480p
60Hz
576p
50Hz,
720p
50Hz,60Hz
50Hz,60Hz
1920x1080
1080p
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin Assignments
15-Pin Side of the
Signal Cable
15-Pin Side of the
Signal Cable
Pin Number
Pin Number
1
2
3
4
5
6
7
8
Video-Red
9
+5V
Video-Green
Video-Blue
N.C.
10
11
12
13
14
15
Ground
N.C.
DDC-Serial data
H-sync
Detect Cable
GND-R
V-sync
GND-G
DDC-Serial clock
GND-B
24-Pin Color Display Signal
Cable
24-Pin Color Display Signal
Cable
Pin Number
Pin Number
1
2
TMDS data 2ˉ
TMDS data 2ˇ
TMDS data 2/4 Shield
TMDS data 4ˉ
TMDS data 4ˇ
DDC Clock
13
14
15
16
17
18
19
20
21
22
23
24
TMDS data 3ˇ
ˇ5V Power
3
Ground (for+5V)
Hot Plug Detect
TMDS data 0ˉ
TMDS data 0ˇ
TMDS data 0/5 Shield
TMDS data 5ˉ
TMDS data 5ˇ
TMDS Clock Shield
TMDS Clock +
4
5
6
7
DDC Data
8
N.C.
9
TMDS data 1ˉ
TMDS data 1ˇ
TMDS data 1/3 Shield
TMDS data 3ˉ
10
11
12
TMDS Clock ˉ
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin No.
Signal Name
Pin No.
Signal Name
Pin No.
17
Signal Name
TMDS Data 2+
9
TMDS Data 0
DDC/CEC Ground
1
2
3
4
5
6
7
8
TMDS Data 2 Shield
TMDS Data 2
10
11
12
13
14
15
16
TMDS Clock +
TMDS Clock Shield
TMDS Clock
CEC
18
19
+5V Power
Hot Plug Detect
TMDS Data 1+
TMDS Data 1Shield
TMDS Data 1
Reserved (N.C. on device
SCL
TMDS Data 0+
TMDS Data 0 Shield
SDA
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Plug and Play
Plug & Play DDC2B Feature
This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the
monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional
information about its display capabilities.
The DDC2B is a bi-directional data channel based on the I2C protocol. The host can request EDID information over
the DDC2B channel.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulation
FCC Notice
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
NOTICE:
The changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this
equipment. It is the responsibilities of the user to correct such interference. It is the responsibility of the user to
correct such interference.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
WEEE Declaration
Disposal of Waste Equipment by Users in Private Household in the European Union.
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
:(((ꢀ'HFODUDWLRQꢀfor India
This symbol on the product or on its packaging indicates that this product must not be disposed of with
your other household waste. Instead it is your responsibility to dispose of your waste equipment by
handing it over to a designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at the time of disposal will
help to conserve natural resources and ensure that it is recycled in a manner that protects human health
and the environment.
For more information about where you can drop off your waste equipment for recycling in India please
visit the below web link.
5R+6ꢀ'HFODUDWLRQꢀIRUꢀ,QGLD
This product complies with all implemented RoHS type regulations worldwide,
including but not limited
to, EU, Korea, Japan, US States (e.g. California), Ukraine, Serbia, Turkey, Vietnam and India.
upcoming proposed RoHS
We continue to monitor, influence and develop our processes to comply with
type regulations, including but not limited to, Brazil,
Argentina, Canada.
Restriction on Hazardous Substances statement (India)
This product complies with the “India E-waste Rule 2011” and prohibits use of lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding
0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the
Rule.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
EPA Energy Star
ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and
Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy
efficiency.
(FOR EPA CERTIFIED MODELS)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Service
Warranty Statement for Europe
LIMITED THREE-YEAR WARRANTY*
For AOC LCD Monitors sold within Europe, AOC International (Europe) B.V. warrants this product to be free from
defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase.
During this period, AOC International (Europe) B.V. will, at its option, either repair the defective product with new or
rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. In the absent of the
proof of purchase, the warranty will start 3 months after the date of manufacturing indicated on the product.
If the product appears to be defective, please contact your local dealer or refer to the service and support section
on www.aoc-europe.com for the warranty instructions in your country. The freight cost for the warranty is pre-paid
by AOC for the delivery and return. Please ensure you provide a dated proof of purchase along with the product
and deliver to the AOC Certified or Authorized Service Center under the following condition:
•
Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to
protects your monitor well enough during transport).
•
•
Put the RMA number on the address label
Put the RMA number on the shipping carton
AOC International (Europe) B.V. will pay the return shipping charges within one of the countries specified within this
warranty statement. AOC International (Europe) B.V. is not responsible for any costs associated with the
transportation of product across international borders. This includes the international border within the European
Union. If the LCD Monitor is not available for collection when the currier attends, you will be charged a collection
fee.
* This limited warranty does not cover any losses or damages that occur as a result of:
•
•
•
•
•
•
•
Damages during transport due to improper packaging
Improper installation or maintenance other then in accordance with AOC’s user manual
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone other than an AOC Certified or
Authorized Service Center
•
•
•
Improper environments like humidity, water damage and dusts
Damaged by violence, earthquake and terrorist attacks
Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other
irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have
modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards.
If your warranty has expired, you still have access to all available service options, but you will be responsible for the
cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service
Center will provide you with an estimate of service costs before receiving your authorization to perform service.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER
PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD. AOC
INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND
EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER BASED ON
CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED THE PRICE
OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO EVENT
SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE OR
FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE. SOME
STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM
COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE
MEMBER COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice. For more information, please
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Statement for Middle East and Africa (MEA)
And
The Commonwealth of Independent States (CIS)
LIMITED ONE to THREE YEARS WARRANTY*
For AOC LCD Monitors sold within the Middle East and Africa (MEA) and the Commonwealth of Independent
States (CIS), AOC International (Europe) B.V. warrants this product to be free from defects in material and
workmanship for a period of One (1) to Three (3) years from the manufacture date depending on sale country.
During this period, AOC International (Europe) B.V. offers a Carry-In (return to Service Center) Warranty Support at
an AOC’s Authorized Service Center or Dealer and at its option, either repair the defective product with new or
rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. As a Standard Policy,
the warranty will be calculated from the manufacture date identified from the product ID serial number, but the total
warranty will be Fifteen (15) months to Thirty Nine (39) months from MFD (manufacture date) depending on sale
country. Warranty will be considered for exceptional cases that are out of warranty as per the product ID serial
number and for such exceptional cases; Original Invoice/Proof Of Purchase Receipt is mandatory.
If the product appears to be defective, please contact your AOC authorized dealer or refer to the service and
support section on AOC’s website for the warranty instructions in your country:
•
•
•
•
•
CIS Central Asia: http://aocmonitorap.com/ciscentral
Middle East: http://aocmonitorap.com/middleeast
Saudi Arabia: http://aocmonitorap.com/saudiarabia
Please ensure you provide a dated proof of purchase along with the product and deliver to the AOC Authorized
Service Center or Dealer under the following condition:
•
Make sure the LCD Monitor is packed in a proper carton box (AOC prefers the original carton box to
protects your monitor well enough during transport).
•
•
Put the RMA number on the address label
Put the RMA number on the shipping carton
* This limited warranty does not cover any losses or damages that occur as a result of:
•
•
•
•
•
•
Damages during transport due to improper packaging
Improper installation or maintenance other then in accordance with AOC’s user manual
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
57
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Repair, modification, or installation of options or parts by anyone other than an AOC Certified or
Authorized Service Center
•
•
•
Improper environments like humidity, water damage and dusts
Damaged by violence, earthquakes and terrorist attacks
Excessive or inadequate heating or air conditioning or electrical powers failures, surges, or other
irregularities
This limited warranty does not cover any of the product firmware or hardware that you or any third party have
modified or altered; you bear the sole responsibility and liability for any such modifications or alteration.
All AOC LCD Monitors are produced according to the ISO 9241-307 Class 1 pixel policy standards.
If your warranty has expired, you still have access to all available service options, but you will be responsible for the
cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified, Authorized Service
Center or dealer will provide you with an estimate of service costs before receiving your authorization to perform
service.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF ONE (1) to THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF
CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS
PERIOD. AOC INTERNATIONAL (EUROPE) B.V. OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE
SOLELY AND EXCULSIVELY AS STATED HERE. AOC INTERNATIONAL (EUROPE) B.V. LIABILITY, WHETHER
BASED ON CONTRACT, TORT, WARRANTY, STRICT LIABILITY, OR OTHER THEORY, SHALL NOT EXCEED
THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE BASIS OF THE CLAIM. IN NO
EVENT SHALL AOC INTERNATIONAL (EUROPE) B.V. BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE
OR FACILITIES OR EQUIPMENT, OR OTHER INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY FROM
COUNTRY TO COUNTRY. THIS LIMITED WARRANTY IS ONLY VALID FOR PRODUCTS PURCHASED IN THE
MEMBER COUNTRIES OF THE EUROPEAN UNION.
Information in this document is subject to change without notice. For more information, please
visit: http://www.aocmonitorap.com
58
Download from Www.Somanuals.com. All Manuals Search And Download.
AOC International (Europe) B.V.
Prins Bernhardplein 200 / 6th floor, Amsterdam, The Netherlands
Tel: +31 (0)20 504 6962 • Fax: +31 (0)20 5046933
AOC Pixel Policy
ISO 9241-307 Class 1
July 25th, 2013
AOC strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing
processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT monitor panels used in
flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel
defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or replaced
under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable defect levels for
each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT monitor
panel must exceed these acceptable levels.
Pixels and Sub Pixel Definition
A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. When all sub
pixels of pixel are lit, the three colored sub pixel together appear as a single white pixel. When all are dark, the three
colored sub pixels together appear as a single black pixel.
Types of Pixel Defects
•
•
Bright Dot Defects: the monitor displays a dark pattern, sub pixels or pixels are always lit or “on”
Black Dot Defects: the monitor displays a light pattern, sub pixels or pixels are always dark or “off”.
ISO 9241-307
Defect Type 1
Defect Type 2
Defect Type 3
Defect Type 4 Black
Pixel Defect Class
Bright Pixel
Black Pixel
Bright Sub pixel
Sub pixel
2
1
0
+
+
+
1
3
5
Class 1
1
1
AOC International (Europe) B.V.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Statement for North & South America (excluding Brazil)
WARRANTY STATEMENT
for AOC Color Monitors
Including those Sold within North America as Specified
Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of
three (3) years for parts & labor and one (1) year for CRT Tube or LCD Panel after the original date of consumer
purchase. During this period, EPI ( EPI is the abbreviation of Envision Peripherals, Inc. ) will, at its option, either
repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except
as *stated below. The parts or product that are replaced become the property of EPI.
In the USA to obtain service under this limited warranty, call EPI for the name of the Authorized Service Center
closest to your area. Deliver the product freight pre-paid, along with the dated proof of purchase, to the EPI
Authorized Service Center. If you cannot deliver the product in person:
Pack it in its original shipping container (or equivalent)
Put the RMA number on the address label
Put the RMA number on the shipping carton
Insure it (or assume the risk of loss/damage during shipment)
Pay all shipping charges
EPI is not responsible for damage to inbound product that was not properly packaged.
EPI will pay the return shipment charges within one of the countries specified within this warranty statement. EPI is
not responsible for any costs associated with the transportation of product across international borders. This
includes the international borders of the countries within this warranty statement.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free
* This limited warranty does not cover any losses or damages that occur as a result of:
Shipping or improper installation or maintenance
Misuse
Neglect
Any cause other than ordinary commercial or industrial application
Adjustment by non-authorized source
Repair, modification, or installation of options or parts by anyone other than an EPI Authorized Service Center
Improper environment
Excessive or inadequate heating or air conditioning or electrical power failures, surges, or other irregularities
This three-year limited warranty does not cover any of the product's firmware or hardware that you or any third
party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A
PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR AND ONE (1) YEAR FOR CRT TUBE OR LCD PANEL
FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR
IMPLIED) APPLY AFTER THIS PERIOD. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS MAY
NOT APPLY TO YOU.
EPI OBLIGATIONS AND YOUR REMEDIES HEREUNDER ARE SOLELY AND EXCLUSIVELY AS STATED HERE.
EPI’ LIABILITY, WHETHER BASED ON CONTRACT, TORT. WARRANTY, STRICT LIABILITY, OR OTHER
THEORY, SHALL NOT EXCEED THE PRICE OF THE INDIVIDUAL UNIT WHOSE DEFECT OR DAMAGE IS THE
BASIS OF THE CLAIM. IN NO EVENT SHALL ENVISION PERIPHERALS, INC. BE LIABLE FOR ANY LOSS OF
PROFITS, LOSS OF USE OR FACILITIES OR EQUIPMENT OR OTHER INDIRECT, INCIDENTAL, OR
CONSEQUENTIAL DAMAGE. IN THE UNITED STATES OF AMERICA, SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES. SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. ALTHOUGH THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.
YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.
In the United States of America, this limited warranty is only valid for Products purchased in the Continental United
States, Alaska, and Hawaii.
Outside the United States of America, this limited warranty is only valid for Products purchased in Canada.
Information in this document is subject to change without notice.
For more details, please visit:
PARAGUAY: http://py.aoc.com/support/warranty
URUGUAY: http://pe.aoc.com/warranty
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Only for AOC branded monitors sold within the continental United States.
All AOC branded monitors are now covered by the EASE Program. If your monitor malfunctions at any time
during the first
three months, AOC will provide a replacement monitor within 72 hours after you are approved
monitor qualifies for the EASE program, AOC will pay for freight both ways.
for our program. If your
Step 1: Phone our TECH Department at 888.662.9888
Step 2: Fill out and return EASE registration forms by mail or fax.
Step 3: We will issue a Return Authorization Number upon verification into the program.
Step 4: A monitor will be advance shipped to your location.
Step 5: We will issue a UPS Call Tag to pick up the defective unit.
Step 6: Please review the following chart to see your EASE program qualifications.
WARRANTY
PERIOD
Within the first three months of
purchase: Covered by EASE
COVERAGE AT
NO CHARGE
CUSTOMER
CHARGES
- None*
- New AOC monitor
- Call tag dispatched and return freight
charges via UPS
Between 4 months – 1 Year
- All Parts & Labor Including CRT
Tube & LCD Panel
- Parts & Labor (excluding CRT Tube
& LCD Panel)
- UPS Return Freight to AOC
- UPS Return Freight to AOC
Between 1 Year - 3 Years:
Covered by standard limited
warranty
*AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit
arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC
service center.
us.aoc.com
62
Download from Www.Somanuals.com. All Manuals Search And Download.
|